YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)
...wo assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pressure release & easy fuel recovery. The connectors are made of brass and aluminium, good airtightness & anti-corrosion. Reinforced rubber resin nylon hoses (WP:300PSI) are resistant to torsion & high temperature.
After testing the fuel pressure by YSTOOL gasoline engine fuel injection pressure tester, compare the reading with the recommended pressure range. If higher, it could be a faulty fuel pressure regulator or a bent clogged return line. If lower, possible causes are dirty fuel filter, weak pump function, incorrect fuel tank exhaust, restricted fuel line, clogged pump inlet filter o....
EVIL ENERGY 6AN Y Adapter Block Coupler Union Fitting Splitter Flare Male Thread Aluminium Alloy Black
-6 AN to dual -6 AN Y fitting is made of aluminum alloy 6061-T6,and hard-anodized coating is compatible with alcohol, exotic fuel-additives, water and oil.It is suitable for fuel system components such as fuel hose line fitting, fuel pump, fuel filter, etc..
The thread size of the 3-way union Y block splitter is 9/16UNF.They are sealed by a 37 degree angle, which is easy to install and avoid leakage.Ideal for any liquid or gas application requiring a high flow separator..
Compared with the T fittings with 90 degrees, male flare thread Y connector split flow at 60 angles can presant less flow obstruction.
All three ends have a male AN fitting，the block can flow both ways..
EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..
Five Oceans FO4281 Reinforced EPA/CARB Fuel Line with Primer Bulb for OMC, Johnson & Evinrude, 6 Feet x 3/8 inches Hose, Compatible with Ethanol Blended Fuels
Compatible with OMC, Johnson, and Evinrude engines and tank connectors.
3/8 inches hose with a 6 feet long line. Includes (2) OMC, Johnson, and Evinrude female barb connectors.
Premium primer bulb with a 3/8 inches OMC, Johnson and Evinrude Hose Connector.
Compatible with ethanol blended fuels & pre-assembled using low permeation fuel line and bulb.
Exceeds fuel flow requirements for OMC outboards. Meets current Environmental Protection Agency (EPA) & CARB regulations . FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Sierra 18-7979 Fuel Filter OEM Perfect Fit: Easy installation with absolutely no drilling or cutting of anything, changes that are completed in minutes without even opening the hood. Effective and great quality with silence during operation.
Durable construction: Made from quality materials to ensure reliable performance and long service life.
20 Years Warranty Yamaha Fuel Filter: We will issue refund or arrange reshipment within 20 years, if have any quality issue. Excellent service and high-efficiency design pattern eliminates up to 99.99% of contaminants and perfectly preventing foreign materials from entering the engine.
Mercury 881540 fuel filter replacement: The fuel filter is a very important component of that fuel delivery system. It makes your vehicle's fuel delivery system efficient. It also plays an important role in achieving optimal performance of the engine. However, w....
Portable Boat Fuel Tank, 6gal - 24L Outboard Marine Portable Fueling Tank with Hose Connector Replacement for Marine Outboard Motor Plastic Fuel Tank
... Equipped with I-shaped handle, more ergonomic, easy to carry and store, rust-proof, durable, beautiful, easy-to-use handle design, light and portable, easy to place and carry..
Package includes: 1* fuel tank , 1* boat fuel line hose, 2* of ends fuel connectors fittings and 1* primer bulb.Note: Please check whether the four screws are tightened before use. If not, you need to tighten the four screws around the hose connector flange..
COMPATIBILITY with 1966-1983 Ford Mustang, 1975-1976 Ford F-150, 1968-1976 Mercury Montego, 1965-1976 Ford F-100, 1967-1985 Ford LTD, 1965-1976 Ford F-250, 1967-1982 Mercury Cougar, 1968-1976 Ford Torino, 1975-1982 Ford Granada..
PROTECT YOUR ENGINE against damage by preventing foreign particles from reaching the fuel injector or carburetor. Constructed with a multi-layered material that has optimum filtering efficiency..
IMPROVE ENGINE PERFORMANCE with ECOGARD Fuel Filters. A clogged or dirty gas filter can result in difficulty starting, hesitation upon accelerating, decreased fuel economy, and rough idling..
PRECISE INLET/OUTLET CONNECTIONS for trouble-free installation..
SPECIFICALLY ENGINEERED AND TESTED for original equipment fuel filter’s fit, form, and function. Meets the requirements for maintaining new vehicle warranties. Replaces: FRAM G22A Purolator F10131 WIX 33046 OE C5UZ-9155A..
Mercury Optimax/DFI oil is recommended for use in Mercury and Mariner Optimax and direct fuel injected DFI 2-cycle outboards.
Maximizes the performance of Mercury and Mariner Optimax and DFI engines where reduced oiling rates and higher operating temperatures put increased demands on lubricants.
Synthetic additives provide increased lubricity and resistance to scuffing.
Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft
【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Portable Boat Fuel Tank 12L 3 Gallon Marine Portable Fueling Tank Replacement for Marine Outboard Motor Fuel Tank
... easy to carry and store, rust-proof, durable, beautiful, easy-to-use handle design, light and portable, easy to place and carry.Fit for Small to Large Boats, Inflatables, Tinnies, Canoes and Kayaks..
Package includes: 1* fuel tank , 1* boat fuel line hose, 2* of ends fuel connectors fittings(As shown in the picture)Note: Please check whether the four screws are tightened before use. If not, you need to tighten the four screws around the hose connector flange..
