Best Merit Brass Nipple Fittings

TL TOOLEGIN Brass Hose Barb Fitting Union/Splicer/Mender/Joiner Assortment Kits 3/16 1/4 5/16 3/8 1/2 5/8 Barbed x Barbed 6pcs

  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • Temperature control circuits,pneumatic circuits,cacuum and fluid systems test apparatus,lubricant,coolantlines, Temperature range of -40°F to 160°F (-53°C to 121°C).
  • CA360 Brass fittings,CA377 Brass for forged fittings.Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.
Check Stock

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

  • BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
  • Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
  • Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
  • Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
  • Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check Stock

Hourleey Brass Rain Barrel Quarter, Rain Barrel Spigot Kit 1/2 inch, Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting

  • High quality: Heavy-duty solid brass bulkhead fitting, screwed along the 1-1/8 inch internal thread all the way, with spigot installed at both ends. Heavy-duty 1-1/8 inches, no kinks, right-angle rotating solid brass ball valve..
  • Two installation methods: Front mounting and rear mounting of brass bulkhead fittings..
  • Applicable scenarios: Bulkhead fittings need to be installed with 1-inch diameter holes, suitable for the case where the wall thickness does not exceed 1.3 inches..
  • Tools required for installation: Electric drill, 1-1/8 inch hole saw, pipe wrench or adjustable wrench..
  • Intimate help: For helping you easily install the rain barrel quarter and effectively prevent leakage, we provide a gasket..
Check Stock

Kegco Basic Kegerator Draft Beer Conversion Kit - BCK-NT

  • ...ator. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This faucet comes complete with a durable ABS plastic faucet knob with a sleek and glossy black finish..
  • 4-1/8″ LONG SHANK WITH NIPPLE ASSEMBLY: The 4-1/8″ long forged brass beer shank features a black flange on the front and a compression ring on the back, making it easy to secure the shank to a mounting surface to attach beer line to your faucet. The shank comes fitted with a tail piece for connecting to 3/16″ I.D. beer line..
  • 5 FOOT LENGTH OF 5/16 INCH I.D. BLUE AIR LINE: This brewery-approved thermoplastic vinyl beverage hose not only meets but exceeds all of the rigid demands for beer dispensing systems. The blue 5/16″ I.D. beer line remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out..
  • 5 FEET OF CLEAR BEER LINE WITH HEXNUT ASSEMBLY: This clear 5/16″ I.D. thermoplastic vinyl beer hose reliably meets all of the demands for beer dispensing systems. It remains flexible and durable at recommended temperatures and pressures, is unaffected by n....
Check Stock

SUNGATOR 3 Pack Barbed Brass Hose Fittings 1/2 Barb to 1/2 NPT Male Threaded End Fittings Hose Connector Adapter with Sealing Tape and Hose Clamps

  • 【SIZE AND PACKAGING】: 1/2"barb X 1/2"NPT male pipe, package includes 3 hose barb fittings, 1 sealing tape, 3 hose clamps.
  • 【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
  • 【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel as well as air tools.
Check Stock

SUNGATOR Brass Barbed Hose Fittings 1 Barb to 1 NPT Male Threaded End Hose Barb Pipe Fittings Hose Adapter Connector with Sealing Tape and Hose Clamps 2 Pack

  • 【SIZE AND PACKAGING】: 1"barb X 1"NPT male pipe, package includes 2 hose barb fittings, 1 sealing tape, 2 hose clamps.
  • 【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
  • 【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel.
Check Stock

BISupply 10 Foot Water Pump Hose for Water Transfer Pump - Spigot Suction Intake Outtake Clear PVC Hose with Couplings

  • [Transfer Water Anywhere]: The BISupply 10-Foot Transfer Water Pump Suction Hose is a transparent PVC hose that is lightweight and portable.
  • Use to evacuate a flooded yard, pump out water from a barrel, and more.
  • [Perfect Size]: 10-foot (3m) long water pump hose has brass male and female end fittings.
  • Fittings designed to fit standard garden hose spigot.
  • [Use Your Pump]: Threaded brass ends for use with your water pump.
  • Fits any sized pump with necessary adapter pieces (adapter and rubber gasket not included).
  • [No Collapsing]: Constructed from transparent, flexible PVC that is reinforced to handle full vacuum (suction) and pull water from a source through your pump without collapsing.
  • [Package Contents]: Hose water pump package includes (1) water suction hose, male/female brass couplings, and (6) plastic zip ties.
Check Stock

Air Compressor Fittings, Air Compressor Hose Kit, 15pcs Air Line Fittings and 1/4 inch NPT Quick Connects

  • Complete Set Of Air Compressor Fittings Features 2 Knurled Quick Connector - Couplers, 3 Male and 3 Female Plugs, 5 Male to Male Connectors, & Two Rolls of Teflon Tape..
  • The LE LEMATEC Air Compressor Quick Connect Fittings Feature a Quick Connect System While Reducing the risk of accidental disconnects..
  • 1/4 in Air Compressor Fittings Feature Heavy Duty Solid Brass Construction Preventing Air Leaks and Costly Replacements..
  • Rust and Corrosion resistant fittings for air compressors which are extremely durable and long lasting making them an excellent choice for anyone with an air compressor..
  • Milton M-style also know as type D or I/M Air Compressor Fittings complete with a convenient storage case. Proudly American Owned and Operated Company..
Check Stock

Pipe Décor 1½ in. x 8 in. Black Steel Pipe, Pre-Cut, Industrial Steel Grey Fits Standard 1½ Inch Black Threaded Pipes, Nipples and Fittings, 4 Pack

  • ... designs of bookshelves, desks, tables,and television stands. Suitable for steampunk lamps, rustic shelves, antique decorations, and vintage-retro themed furniture.
  • ✔HIGH QUALITY INDUSTRY CERTIFIED: We constructed our premium black pipes to meet Industry Standards. They can easily attach to other threaded pipes or fittings. They are graded ASME B1.20.1 and ASTM A53 for black pipe nipple. National Pipe Thread Taper (NPT) Male threads on both ends to connect to female threaded pipes or fittings. Feel the quality with our Premium Black Pipes.
  • ✔ AUTHENTIC MALLEABLE IRON: Don't accept cheap imitations with CMI inc know that you are receiving Top quality High Industrial Grade Premium pipe. Feel the difference with weight and feel of our product.
  • ✔30-DAY MONEY BACK GUARANTEE: If you are not satisfied with our product please contact us and allow us the opportunity to resolve any issue you may have. Customer satisfaction is always our top priority..
Check Stock

Seastar Bleed Kit/Fill Kit Leak Free Brass Helm Fitting Rust Free Quick Connect Professional Bleed Kit for Seastar Hydraulic Steering Systems Works With Seastar Hydraulic Steering Fluid

  • ✅ LEAK FREE - The threaded brass fittings will not cross thread which ensures no leaking or mess making when you are bleeding your Seastar hydraulic....
  • ✅ EASY TO USE - The quick connect fittings make bleeding your hydraulics system an effortless task by eliminating the need to screw in both threaded....
  • ✅ RUST FREE - All of the metal within the Seastar bleed kit is brass and stainless steel preventing rust. This ensures everlasting quality even in....
  • ✅ UNIVERSAL - Fittings work with most outboard, inboard/outboard, and inboard hydraulic steering kits including Seastar. Works with nearly all....
  • ✅ SATISFACTION GUARANTEE - If you are not satisfied with the experience the Mountain Top Supply bleed kit offered you, please reach out within the....
Check Stock