Best Metal Brake Cap

ITEQ Brake Fluid Liquid Tester Pen with 5 LED Indicators, Calibrated For DOT3 DOT4 Brake Fluid

  • Test the car brake fluid quality quickly to check whether it’s qualified, which can remind you to change the brake fluid when necessary to avoid traffic accident.
  • The LED indicators will show percentage of water in the brake fluid with 3 colors green yellow and red.
  • Calibrated for cars using DOT4 and DOT3 brake fluids (But DOT3 is almost replaced by DOT4 because DOT4 has better performance).
  • Only takes seconds to know the results,very easy to use.
  • CE and RoHS approved. Protective cap included.Takes 1 x AAA/1.5V battery (not included).
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
Check Stock

VGEBY Fishing Reel,Metal Spool Magnetic Brake Fishing Casting Reel Fish Wire Wheel Black Red (Left Hand LK100L)

  • * IN INITIAL USING-- In initial using, the magnetic brake switch can adjusted to the position of 9 gear, the greater the adjustment of the brake force, the slower the speed of the spool, the closer the throwing distance, the less easy to blow the wire..
  • * ABS + METAL MATERIAL-- This fishing reel is made of high-strength ABS and metal materials as a whole, with high strength, no rust, and long service life..
  • * ANTI-SLIP GRIP-- The metal grip has good anti-slip properties, and will not affect the use effect due to rain or sweat. It is very suitable for outdoor use..
  • * 9 GEAR MAGNETIC BRAKE-- The fishing reel adopts 9-speed electromagnetic brake, which is fast and smooth, easy to install and unload, and brake sensitive..
  • * HIGH STRENGTH LIGHTWEIGHT SPOOL-- The fishing reel adopts high-strength and light-weight wire, which is accurate in casting, fast in wire-out speed, and fast in sinking, which reduces the possibility of wire explosion..
Check Stock

2 Pieces Mountain Bike Brake Aluminum Alloy Brake Handles with 3 Finger Design 2.2 cm Diameter and Bike Brake Cables Wires for Most Bicycles, Road Bikes

  • Applicable bikes and size: bike brake handle is suitable for handlebars with a diameter of 2.2 cm/ 0.87 inches, which can be applied to most bikes, including road bike, mountain bike, children's bike, fixed gear bike, folding bike, etc..
  • The 3 finger designed of the handle make it suitable for most people's hand, even for children.
  • Ample accessories: there are 2 pieces double-ended bicycle brake cables provided for you, one end is suitable for mountain bike and the other is for road bike.
  • Apart from the cables, you will also receive 4 pieces O rings and 4 pieces bike cable caps.
  • Quality brake: adopting the material of aluminum alloy, mountain bike brake is tough and sturdy enough for people to use for a long time.
  • The brake cables are made of stell, featuring good durability and strength.
  • Practical function: owning a sturdy feature, bicycle brake lever adds little burden on your bike, making sure your riding could perform smooth and balanced.
  • The ferrules and caps function as protecting your bike cables from paints peeling off and friction, putting on cable cap can effectively prevent the cable end from scratching, the length of the brake line can be tailored based on your will.
  • Easy to install: bike brake lever is simple to mount on the bikes, after fin....
Check Stock

KAKA Industrial 3 IN 1 Sheet Metal Shear 30-Inch Combination Sheet Metal Brake Cut Slip Roll Machine 3-IN-1/30 Segments Press Brake Shear Roll Machine

  • ...be requested for you at a discounted rate, please send us a message stating you need the service. A valid phone number is REQUIRED. The carrier will contact you one day before the delivery, please provide a valid phone number..
  • 20 GAUGES CAPACITY AND 30 INCH WIDE BED WIDTH ENSURES SMOOTH WORK FLOW. This 3-IN-1 sheet metal machine has the capacity up to 20 gauges mild steel and 16 gauge aluminum in widths up to 30-inches wide. It is a perfect combination machine for sheet metal machine to the length of 30" and thickness of 1/25" cutting stop. The roll bending starting with diameter of 1 1/2" also guarantees enough capacity.
  • ADJUSTABLE FINGERS ENSURES FLEXIBILITY AND PRECISION. The vertical press brake portion of the shear brake roll machine has a maximum bend angle of 90 degrees with adjustable fingers on the top beam to easily assist with making any size boxes. The slip roll portion has three wire grooves, and can form rolls down to 1-35/64-inches in diameter. Both feature guarantees adjustability and high accuracy.
  • VERSATILITY AND EASY ALIGNMENT. This 30” brake shear roll can be utilized to cut multiple materials. The shear can be used for mild steel, aluminum, brass, copper, lead, plastic and zinc. The 3-in-1 sheet metal brakes, sheet metal shears a....
Check Stock

Permatex 24110 Ultra Disc Brake Caliper Lube, 8 oz.

  • Green, nonmelting, environmentally-friendly, 100% synthetic lubricant.
  • Formulated to lubricate under the most adverse brake conditions, preventing seizing and sticking of disc brake components.
  • Assures that critical metal-to-metal contact areas remain lubricated throughout the pad life.
  • Temperature Range: -40°F to 400°F (-40°C to 204°C).
  • Suggested Applications: Caliper pins, hardware, and the back-side of brake pads.
Check Stock

CURT 13370 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Honda Odyssey

  • PORTABLE. The Echo trailer brake controller has a non-invasive install and is easily transferrable from one vehicle to another. It plugs into any 7-way connector, wirelessly links to your smartphone using Bluetooth.
  • SMARTPHONE-READY. The Echo brake controller wirelessly syncs with your Apple or Android phone, turning it into a brake controller interface with the Smart Control app (Warning: Avoid distracted driving. Only make adjustments when vehicle is stationary). Note: If Bluetooth connection is lost, the brake controller will continue to function safely, using the most recently programmed settings.
  • ZERO-TOOL INSTALL. Installing this trailer brake controller is as easy as plugging in a 7-way trailer wiring connector. It requires no tools, no extra wires and no hardware. A locking tab and strap keep it firmly connected. NOTE: Strap stored inside cap.
  • HIGHLY RESPONSIVE. Echo uses a triple-axis accelerometer to provide smooth, safe braking. It maintains responsive braking, even when your phone screen is locked, receives incoming calls or if the Bluetooth connection is lost.
  • VERSATILE. This electronic trailer brake controller easily transfers between vehicles and trailers and works on virtually any trailer with 1 to 2 axles (2 to 4 brakes). It is also full....
Check Stock

TEKTRO M530 Linear Pull Brake, Black

  • Application: bike brakes kit,suitable for Children most bicycles,Height of break pad adjustable 20mm;See Figure 2 for detailed dimensions..
  • Material: The bike brakes kit is made of high-quality aluminum alloy, and the brake cable is also made of high-quality aluminum alloy. It is durable and can be used for a long time. It is resistant to cold, heat and oxidation, and is not easily deformed. It ensures that the brakes are sensitive and suitable for most weather conditions..
  • Product size: Front brake cable length: 55cm/21.65".
  • Rear brake cable length: 155cm/61.02".and the bicycle brake handle is suitable for handlebars with a diameter of 2.2 cm / 0.87"..
  • Easy to install: Quickly replace the old bicycle brake and tighten it with the corresponding brake fixing hole.
  • pass the brake wire through the brake wire tube in turn to fix the position of the metal wire tube.
  • then fix it on the bolt, install the brake pads, and adjust the distance of the brake wire , Position and length, and then fix the brake cable..
  • You will get: 2 pieces bike C shape brake, 1 pair aluminum bicycle brake lever brake housing, 1 pair cable brakes V type replacement set.
Check Stock

KAKA Industrial Manual Hand Brake Solid Construction with Steel Frame Stand (MB-36)

  • Lift gate service will have extra charges and can be requested for you at a discounted rate, please send us a message stating you need the service. A valid phone number is REQUIRED. The carrier will contact you one day before the delivery, please provide a valid phone number..
  • Bends sheet metal to 12 gauge (up to 18" wide), 16 gauge (up to 36" wide).
  • HIGH FLEXIBILITY CAN BE ACHIEVED THROUGH CHANGING THE BENDING ANGLE. The bending angel of this metal bending brake can rotate up to 120 degree. In a large extent, it will the adjustability of using this brake.
  • EASY OPERATION WITH UPPER AND LOWER HANDLE. This bending brake is very easy to operate. Both the upper handle and lower handle assist the operation of a project.
  • HIGH QUALITY BUILD AND CAN LAST FOR LONG TIME HEAVY USE. The compositions of this metal bending brake are solid heavy material that can last for long time operation. It would be a great purchase in term of long-term investment.
Check Stock

AUTOSCRUB 12\ x 12\ Fine Grade Towel [AS-009]

  • Suitable For: Precisely Manufactured on the Basis of Original Factory Specifications, Replacement for Q7 Sq7 2007‑ 2015. Built to Meet Standard Specification, Strictly Follow Factory Quality Control..
  • Stainless Steel + PPE rubber : Brake Pedal Cover using stainless steel and rubber, wear‑resistant and corrosion‑resistant. Protect the original car pedal from damage.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life..
  • Convenient installation: There are 2 brake pedals in total. This brake pedal is custom-designed according to the original model. It is easy to install and disassemble. The rubber on the original car needs to be removed..
  • Easy to Install:Brake pedal cap is easy to install.Customized design according to the original car model, easy to install and easy to disassemble. The rubber on the original car needs to be removed.
Check Stock