Best Metal Carbide Punches

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

Carbide Burrs Set JESTUOUS 1/8 Shank Diameter Double Cut Tungsten Carbide Burs Rotary File Carving Grinding Bit for Die Grinder Rotary Drill Tool 20pcs

  • Used with handheld electric or pneumatic tool drive,for Die Grinder, Dremmel Tool or Rotary Drill which can go along with 1/8" shank carbide burs..
  • With tungsten carbide material ,sharp and sturdy,processing all kinds of metal and non-metal..
  • For cast iron, cast steel, carbon steel, alloy steel, stainless steel,plastics,metal and other materials..
  • Assorted shapes include: ball, cone, rounded cylinder, flat top cylinder..
  • Carbide burr kits shank diameter:3mm(1/8 inch), Cutting edge diameter:3mm(1/8 inch),and 20pcs/set..
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood(not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness :Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5,This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

Rocaris 13Pcs 16mm-53mm Stainless Steel Carbide Tip Metal Drill Bit Hole Saw Set

  • 【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and....
  • 【Top Quality】Made of YG8 tungsten carbide steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held....
  • 【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient....
  • 【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP,....
  • 【13 Different Size】Outside diameter Size: 16mm, 18mm, 20mm, 22mm, 25mm,26mm,28mm, 30mm, 35mm, 40mm,45mm, 50mm, 53mm.Wood can be drilled about 20mm....
Check Stock

Saw Reciprocating - Reciprocating Saw Cut Through Metal Saws - Power

  • [Carbide Technology] Up to 50x longer life than bi-metal reciprocating saw blades.
  • [Heavy Metal Application] 8 teeth per inch teeth design is ideal for cutting all kinds of metal in tough applications, e.g. high-alloy construction....
  • [Ultimate cutting performance] Easy to cut advanced materials where bi-metal blades fail quickly, such as stainless steels, high-alloy steels or....
  • [Design for Toughest Materials] Each carbide tooth is precision ground and individually welded, provides ultimate flexibility and impact strength....
  • [Blade Dimension] 6-inch 8 TPI metal cutting (3/16 in. -1/2 in. ), 1/2inch universal shank fits all major sawzall saws such as Bosch, Milwaukee,....
Check Stock

HLOFIZI 1-3/8 Inch Hole Saw (35 MM) with Tungsten Carbide Tipped for Drilling Metal, Hardwood, Nail-Embedded Wood, Stainless Steel, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

  • Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 1-3/8” bi-metal hole saw.
  • Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass and more.
  • Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 1-3/8 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

BESTNULE Punch Set, Pin Punches, Punch Tool, Roll Pin Punch Set, Made of High Quality Metal Material Including Punches and Hammer, Mechanical Repair Tool, with Organizer Storage Box (with Bench Block)

  • ...ent. Ideal punch tool for jewelers, watchmakers, and carpenters. Used for machinery, vehicles, woodworking and craft repair. After many experiments, we found that the pin is the most easily damaged part of a whole set of our punch set, so we have made numerous modifications to provide you with excellent quality pin punches, so that you can avoid the abandonment of the whole set of punches due to the breakage of one pin..
  • 【All-IN-1 Set】Includes everything you need to get started and suitable for everyone, whether you're a novice or a veteran. This punch set includes 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" and 5/16". 2Pcs 3/8",15/64" plastic pin punches.
  • 1 metal tweezers and 1 hammer with 4 detachable hammer heads.
  • 4Pcs hollow end starter punch set including 1/16”,5/64”,3/32”,1/8”.
  • 2 Pcs flat pin punches including 1/16" and 3/32".
  • 2 Pcs roll pin punches including 1/16" and 3/32".
  • 【Detachable Hammer】 In use with a chrome-plated steel hammer. In addition, we added 4 replaceable hammer heads (1 brass, 1 chrome, 1 nylon in white and 1 rubber in....
Check Stock

Diablo D1472CF 14-inch Steel Demon 72T Cermet II Carbide Ferrous Metal Saw Blade

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are "Hot work" compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
Check Stock

Diablo D0842CF 8-inch Steel Demon 42T Cermet II Carbide Ferrous Metal Saw Blade

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
Check Stock

Freud DS0408CF 4in Steel Demon Carbide-tipped Reciprocating Blades

  • High performance carbide for greater durability and cutting performance in thick metal.
  • Enhanced carbide tip to blade connection for extreme impact resistance, Imported.
Check Stock