Best Metal Cnc Router

Stay Home [Explicit]

  • ...o that you can craft anything you like. Projects made with our M2 include benches, signs, lamps, tables, and even a guitar!.
  • FULL KIT: M2 is a 3-Axis wall-mounted CNC cutting machine and comes with laser-cut, steel and powder coated mounting brackets, lead screw z-axis, built-in dust collection port, three ⅛‘’ router bits that offer extremely precise cuts. The router is not included. Compatible routers include: DeWalt611, Bosch Colt, Makita RT0700CX and EU equivalents to each of the above..
  • OPEN-SOURCE SOFTWARE: The M2 is designed to be used with Makerverse open-source software which is included with your purchase. Makerverse is a GRBL CNC control application that has custom controls made specifically for all Maker Made products: the Maslow, M2 and 300x. The application is derived from the open source CNCjs project and will continue to receive new features and updates from the Maker Made team..
  • PRECISION: Maker Made M2 has a highly accurate cutting with a variance of just 1mm. Every piece is purpose-built for accurate, consistent cutting performance. The M2 cuts up to 40% faster than Maslow CNC, its motor is cooler and more efficient, the router bit is smaller for better accuracy..
  • TRIED AND TESTED PARTS MADE TO LAST: Designed and developed in....
Check Stock

Sinoprotools CNC Spoilboard Surfacing Router Bits 1/4 inch Shank Carbide Slab Flattening Router Bit/ Planing Bit Wood Milling Cutter Planer Bit for Woodworking

  • High Quality Material: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Heat resistant Teflon coating ensuring durability..
  • Multifunction:This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving..
  • Applicable Wood : This slab flattening router bit is suitable for solid woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials..
  • Applicable Machines: CNC and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock

CNC Spoilboard Surfacing Router Bits,1/4 inch Shank 1inch Cutting Diameter plus 1/2 inch Shank 2inch Cutting Diameter , Slab Flattening Router Bit Planing Bit Wood Planing Bit Dado Planer Perfectly forSurfacing, Rabbeting, Flycutter, Leveler, Surface Planer(Carbide) 2 pieces

  • [Product Specification]4 WINGS WOOD CNC ROUTER BIT: Shank: 1/2″.
  • Cut Length: 1/2″ 3 WINGS WOOD CNC ROUTER BIT: Shank: 1/4”.
  • Cut Length: 1/4” .Gift 1/2″to1/4″ Router Collet 1pcs.
  • [High quality materials]heat resistant teflon coating,Industrial grade micro grain carbide tips,High-quality alloy steel bodies, cutters provide superior wear resistance and long life, with anti-kickback design.This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications..
  • [Application scene] Suitable for wood, MDF, particleboard, plywood,compact panels, laminate, acrylic and etc.it can easily cut the groove you want.Do not cut various metals and non-wood materials such as: steel, iron, sand, etc.This bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving.
  • [Perfect fit]Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc. Our slotting knives can easily fit most devices on the market, so you don’t need to worry about fit.Perfect choice of prof....
Check Stock

uxcell 1/4\ Shank T Slot Router Bit 1/8\ Cutting Depth, 2 Flutes High Speed Steel T Track Router Cutter (Gray)

  • overall length: 1.6" (40mm). High-speed steel slot router bit.
  • Applications: Widely used for processing softwoods, hardwoods, chipboard, plywood, and MDF etc. Designed for creating T-slot wall panels and radius edges on the T-slots.
  • Features: T type slot router bit. High-speed steel (HSS) sharp cutting edge, high hardness and long life. Solid hardened steel body with anti-kickback design.
  • How To Use: Use on electric router, carving machine, edge trimmer, CNC and other automatic routers. Shanks of all bits must be inserted in the collet in full length.
  • Warm Tips: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 8-12M/Min.
Check Stock

Spetool 90 Degree Carbide V Bits with Tiain Coated 4 Flutes Chamfer End Mill for Caving V Groove and Sign

  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

Next Wave PRO RS1000 two Axis CNC Router Table setup for Dovetail, Box Joint, Rabbet, Dado, Lock Miter

  • The SHARK RS1000 PRO allows you to type in any desired measurement, press OK, and it will accurately move to that exact dimension, even if it is only one-thousandth of an inch, no more bumping or nudging needed!.
  • Toggles between input inches as fractions, decimals, or metric measurements so you don’t have to convert dimensions.
  • Fence and lift move accurately in direct relationship to the bit with movement as little as .001”.
  • WHAT IS INCLUDED: 3-1/2 inch travel CNC Servo Motor driven Router Lift, Fence with Feather Boards, , Control Pendent and software, CNC Servo Motor driven Fence, Includes template for cutting Hole in your home made Table top..
  • WHAT IS NOT INCLUDED: PRO Sliding Miter, Router Table Top or stand, Router motor(You will need to provide a router Motor with a 3-1/2 inch diameter Motor can, Bits,.
Check Stock

SpeTool 4pcs Spiral Ball Nose Tapered End Mill 1/4 inch Shank Router Bits 2 Flutes Router Bit with 2.0mm Diameter 1.0mm Radius ）Ball HRC55 Woodworking CNC 2D and 3D Carving Bits

  • 4Pcs Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 2.0mm tip diameter, 3.92Deg, H-Si coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/2 inch Cutting Diameter with Nano Blue Coated 1/2 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters Extra Long 4”

  • UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat....
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles....
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for....
  • The compression router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

SpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree, 4 Flutes 1/4 inch Shank for CNC Carving and Chamfering

  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

CNCTOPBAOS 3 Axis Desktop DIY Mini CNC 3018 Router Kit GRBL Control Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine Working Area 30x18x4.5cm

  • According to the instructions,the machine is easy to assemble..
  • ♞【Spindle&Stepper Motor】775 spindle motor (12-36V) 24V:10000r / min.
  • Collet: ER11 3.175mm (Can be equipped with 0-7mm).
  • Nema17 stepper motor 1.3A/0.25N.m/42x42x34mm.
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module.【Working area】30x18x4.5cm.
  • Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 / Linux.
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items. if you have the module,you also can change ....
Check Stock