Marker Jester 18 Pro ID Ski Bindings 2023 - Tan 120mm
All MARKER bindings are equipped with a moveable AFD (anti friction device) leading to a highly precise release almost entirely unhindered by dirt, snow and ice!.
Magnesium sole holders in the toe combinded with a Magnesium heel housing provide the solid construction for the hardest charging freeride athletes.
The toe construction with DIN/ISO up to Z 18 allows for impressive retention when freeriding.
Use the metal rail to scratch off ice and snow below your boot sole..
CZH-LABS DIN Rail Mount 12 Amp Solid State Relay SSR Module in 4~32VDC Out 100~240VAC 1 Channel
MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated)..
Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode..
Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 12 Amp. Isolation: Phototriac. Zero cross: Yes..
Dual input terminal block, you can flexibility to configure the input control mode: Individual / Common Positive / Common Negative..
DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm....
GLOSO E69 15A Mid Range Mini Manual Reset (T3) Circuit Breaker, Compact Midum IP66, Marine Auto Truck (15A)
Size: 2.6"x 3.1"x 0.7"/ 67 x78 x 18mm (L*W*H). Fit for 35mm DIN rail..
Function: High quality AC mini circuit used for line overload, short circuit protection and infrequent conversion of lines. It can also work as on-off switch for load circuits..
Easy Installation: Modular sturcture, can be easily installed on the DIN standard guide rail in distribution box, bistable locking clip..
Applications: DZ47-63 series miniature circuit breaker is mainly used for the illumination of office buildings and residential buildings. It is used for distribution and protection the facilities from damages caused by overload and short-circuit..
VictorsHome Miniature Circuit Breaker Low-Voltage DZ47-63 2 Pole 20A 400V DIN Rail Mount C20
Rated Voltage: 400V. Fit for 35mm DIN rail..
☀MINI CIRCUIT BREAKER - Be used to protect a low-voltage electrical system from damage caused by excess current resulting from an overload or short circuit..
☀FAST TRIP FUNCTION - Ensure reliable operation of the load and prolong the life of circuit breaker. It can also work as on-off switch for load circuits..
☀EASY INSTALLATION - Modular sturcture, can be easily installed on the DIN standard guide rail in distribution box, bistable locking clip..
☀APPLICATIONS - DZ47-63 series miniature circuit breaker is mainly used for the illumination of office buildings and residential buildings. It is used for distribution and protection the facilities from damages caused by overload and short-circuit. If you have any question, please feel free to contact us !.
StarTech.com 4 Port Serial Hub USB to RS232/RS485/RS422 Adapter - Industrial USB 2.0 to DB9 Serial Converter Hub - IP30 Rated - Din Rail Mountable Metal Serial Hub - 15kV ESD Protection (ICUSB234854I)
RUGGED & RELIABLE: This industrial metal USB to serial adapter hub adds 4 RS-232/422/485 ports & 1 USB 2.0 port w/ 15kV ESD surge protection (level 4), IP30 rating & locking connectors on all ports.
4 SERIAL PORTS: The ports on this USB to serial converter can be individually configured to RS232, RS422 or RS485 (2wire/4wire) at baud rates up to 921.6Kbps for devices like barcode scanners/printers.
MOUNTING OPTIONS: This metal mountable 4-port serial hub w/ 6ft (1.8 m) screw-lock USB cable incl. installs securely to a desk, wall or DIN rail using the built-in mounting ears & incl. DIN brackets.
FLEXIBLE POWER: This serial hub can be powered with either the 12V screw-locking power adapter or the 5V USB input, while each serial port (pin 9) can be set to 5V, 12V (power adapter required), or 0V.
WIDELY COMPATIBLE: To connect industrial grade equipment to any terminal, the USB to multiple DB9 male serial converter supports current and legacy Windows, Linux, macOS, as well as embedded platforms.
Electrodepot 40 Amp 4 Pole Normally Closed Contactor, 110-120V Coil, Motor Load 20A, Lighting 40A Bundle with Slotted Steel Zinc Plated DIN Rail, 35 mm x 6 in – 1 Piece with 2 Number 10 Screws
BUNDLE CONTENT: 4 ITEMS – One (1) 40A Contactor, one (1) compatible Slotted Steel Zinc Plated DIN Rail and two (2) drive stainless steel truss head screws (#10, 1/2") for immediate installation.
APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
Coil load Inrush 30VA, Sealed 4VA. Inductive/Motor Load: 20Amp, Resistive/Incandescent Load: 40Amp. DC Load: 30Amp @ 24VDC. Compatible with 20 Amp, 30 Amp, 32 Amp and 40 Amp loads. Power Lug Terminal Capacity AWG # 4.
OTHER CONTACTOR DETAILS – Contactor type NC with 4 poles, power status indicator. IEC AC Rate: AC-1.
8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height).
DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 152.40mm (6”) and t....
Electrodepot 40 Amp 12 Pole (4 Pole x 3) Normally Open, 110-120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with 8\ DIN Rail and 2 Number 10 Screws
BUNDLE CONTENT: 6 ITEMS – Three (3) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
one (1) compatible Slotted Steel Zinc Plated 35mm x 200mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation.
CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specificat....
Tekware Auto Darkening Welding Helmet, Ultra Large Viewing Screen True Color Welder helmet, 4 Arc Sensor Welding Hood, Lightweight Hemispherical 4C Lens Welding Mask, Variable Shade 4~5/9-9/13
Comfortable Ultra Large View Welding Helmet: Unique hemispherical enclosure protection solution can protect damage from all sides. Equipped with a 3.94‘’×3.27‘’ultra large viewing area and different angles of change provide convenience for the welder. A double liquid crystal layer protects for 8+ hours of welding. Better Clarity, True Color View - 1/1/1/2 Optical Clarity.
Hemispherical Design All Sides Protection: The auto-darkening welding helmet features the 4C lens technology and 3.94 "×3.27 " ‘super large viewing screen, provide protection and is convenient from different angles for welders.
Multi-occasion usage: The auto darkening welding hood can be applied to automotive, construction, metal production, and fabrication, military maintenance, repair and operation (MRO), industrial, etc. Lightweight is suitable for a long time working.
Double Liquid Crystal Panels Luminous Welder helmets: The unique luminous design makes you stand out among many welders, double liquid crystal panel ensures 8+ hours of profession use, Superior comfort with the adjustable and fatigue-free headgear.
4 Premium Sensors & Solar Powered: The Solar-powered welder helmet combined with a highly sensitive probe, 4 premium sensors. Perfect for TIG MIG Arc, plasma app....
