Inland PLA PRO (PLA+) 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Natural
PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
PLA PLUS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
INLAND PLA PLUS FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, a....
SainSmart Filament Dryer 3D Printer Filament Storage Dry Box Filament Dehydrator Container, with Upgraded Silent Fan, Advanced Heating Mechanism, Up to 24hrs Timer, and Adjustable Temperature
[Fast & Even Heating]: SainSmart Filament Dryer Box is equipped with an enhanced heating mechanism. The Polyimide heater inside the box allows for rapid heat up, the curved metal plate enables effective heat transfer and the air circulation fan at the bottom delivers evenly heated filaments..
[Reduced Noise Level]: The upgraded SainSmart 3D Printer Filament Dryer equips with an upgraded centrifugal fan that is 20% quieter than its predecessor, providing you a better experience..
[Up to 24 Hours Timer]:The maximum drying time of this filament dryer is 24 hours, constantly drying your filament for the best printing results..
[Straightforward Temperature Setting]: There are 3 default temperature settings for different filament types. I: 40 °C, for PLA and PLA+ Filament.
II: 50°C, for ABS, ABS+ and PETG Filament.
III: 55°C, for TPU, PVA, PC and Nylon Filament..
[Wide Filament Compatibility]: With a maximum filament capacity measuring ⌀200mm × 73mm(H), the SainSmart Filament Dryer is compatible with filaments with different spool weights and sizes. 500g, 1KG.
YOUSU Tricolor PLA Filament Triple Color Coextrusion PLA Filament 1.75mm (± 0.03 mm) for 3D Printer & 3D Pen, Multicolor PLA Like Rainbow Filament, Silk PLA Red/Gold/Blue , 1kg(2.2lbs).
[Tricolor PLA filament ] Yousu trichromatic PLA filament, three color in the same filament. Perfect filament winding that compatible with the most FDM 3D printers..
[Shiny PLA filament] - Yousu Coextrusion PLA Filament Without polishing, you can get pearlescent & gorgeous printing surface. Unique based recipe assures less stringing and better overhang performance..
[No warping & Good Layer Bonding] - Yousu Silk PLA Filament has Excellent first layer adhesion to reduce warpage, shrinkage, curl and print failure. Good layer bonding strength make the printing parts stronger..
[Purity material & Precision Diameter ]- Full 1KG 3D printer filament reel, perfect roundness and 0.03mm diameter tolerance, good winding, avoid print failure jam or clog and making you a smoothly printing & better surface..
[Vacuumed Sealed Package] The Filament Net Weight: 1KG.Yousu PLA filament comes in a sealed vacuum bag with a desiccant bag, keep your 3d printer filament in a good condition to be printed.
Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - White
PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Olive Green
PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Black
PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Inland Tough PLA 3D Printer Filament 1.75 mm – Tougher Than PLA+ - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – High Impact Strength- Black
TOUGH PLA FILAMENT PRINT SETTINGS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) Recommended Extrusion/Nozzle Temperature: 210 °C - 230 °C (410 °F - 446 °F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
INLAND TOUGH PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Tough PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
EASY-TO-USE: Inland Tough PLA filament is as easy to use as regular PLA, but has higher impact resistance. Tough PLA is engineered for strength and durability and is often compared to ABS for its mechanical characteristics. Produce your best print with our no-clog, bubble-free durable Tough PLA. The Inland filament can be used with most FDM and FFF 3D Printers..
HIGH-QUALITY TOUGH PLA: The Tough PLA is non-toxic and tightly wound on its cardboard spool. To keep your filament tangle free do not let go of the filament on the spool! Alwa....
ATARAXIA ART Flexible PLA Filament, PLA 1.75mm, 3D Printer Filament,1kg/2.2lb, Better Than TPU, 89A Shore Hardness, Patent Formula, Compatible Bowden Extruder, with Filament Storage Bag, PLA Sky Blue
☀【Patented Flexible PLA Formula & 89A Shore Hardness】 - Ataraxia Art Flexible PLA plus filament is a patented formula that took years to perfect & release. Flex PLA is more flexible than TPU & easier to use. Flexible Pla elongated at break more than is 500-600 % so Flexy filament can be stretch 5 to 6 times higher more than any 3d printer filaments.3d printer filament Flexible PLA is used for great variety of project like shoe insoles, Arts & Crafts, DIY, phone case, gifts, belt & decoration..
☀ [ Wide Pantone Match Colors Option For Flexible Stretch PLA] - Ataraxia art offer Flexible PLA Plus Filament 1.75mm in Auto winding 1kg./2.2lb spool, . Ataraxia FPLA is also available in the following Pantone Matched colors: Red, Black, Yellow, Gold, Violet, White, ivory white, Blue, sky Blue, Green, prusa Orange, Light Brown, Brown, Slate Gray, Pink & chocolate. To match exact color code please refer our Pantone code in our product image..
☀ 【 Compatible with Bowden Extruder and Direct Drive 】- Ataraxia Flexible PLA Filament 1.75mm Works with any 3dprinter, regardless of it being direct drive or Bowden extruders. TPU filament 1.75mm on ....
SUNLU 3D Printer Filament PLA Plus 1.75mm, SUNLU Neatly Wound PLA Filament 1.75mm PRO, PLA+ Filament for Most FDM 3D Printer, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool(2.2lbs), Black
【5 Rolls of 0.25kg 1.75mm SILK PLA Filament, Multiple Color Choices】5 rolls of 250g SUNLU 1.75mm SILK PLA filament.Color: Brass+Red Copper+Bronze+Green+Pink.The design of 250g SILK PLA filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
【 Shiny SILK PLA Filament】Compared to regular PLA 3D printer filament, SUNLU SILK PLA filament has a glossy, smooth silky surface that does not require polishing.The fantastic SILK filament has great colour and shine,making it ideal for printing art and craft.Great SILK PLA filament for any 3D print job.It has a nice silk looking shine on prints..
【 Great Easy to Print】Feed smoothly and constantly without clogging the nozzle or extrude.Smooth SUNLU 1.75mm SILK PLA 3D filament(Tolerance Level : ± 0.02mm).1 kg spool (2.2lbs),330m each spool.Minimum tolerance and low warping to ensure consistent feeding and fast prints,say goodbye to clogging..
【Neatly Wound Filament】SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure a neat lines of SUNLU SILK PLA filament with few knots, avoiding possible breaks..
ABS 3D Printer Filament, SUNLU 250g ABS Filament 1.75mm, High Durable Filament,Dimensional Accuracy +/- 0.02 mm, 0.25 kg Spool, 8 Rolls,Black+White+Grey+Blue+Yellow+Green+Red+Orange
【8 Rolls of 0.25kg 1.75mm ABS Filament, Multiple Color Choices】8 rolls of 250g SUNLU 1.75mm ABS filament.Color:Black+White+Grey+Blue+Yellow+Green+Red+Orange.Multiple colors satisfy your rich 3d printing creativity.The design of 250g ABS filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
【Strong and Durable ABS Filaments】---SUNLU ABS filament 1.75mm is a strong thermoplastic material—great for creating durable items that require a higher resistance to heat. It can be used for printed parts that are frequently handled, dropped or may be stored at high temperatures, such as mobile phone cases, sports camera mounts, toys, tools, electrical appliance housings, etc..
【High Precision +/- 0.02mm Tolerance PLA filament】: 1.75mm ABS 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 325m of ABS filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
【No Clogging, No Bubbles and Good Adhesion】Better flow of SUNLU no plugging premium 1.75mm ABS filament.It has consistent diameter & roundness,less stringing and warping,s....
