Quad Band Mobile Radio Antenna 10m/6m/2m/70cm for YAESU FT-8900R TYT TH-9800 QYT KT-980 Plus KT-8900 KT-7900D with Clip and 5m Cable
Frequency:29MHZ/50MHZ/144MHZ/430MHZ/118-124MHZ.
Detachable Stainless steel antenna whip,sturdy and durable,easy to operate and install.Bendable design at the bottom of the antenna: you can put down the antenna when into the basement or over the height limit..
Note: To prevent the antenna from folding during driving, you can rotate the collapsible part of the antenna 90 degrees to prevent the antenna from folding backwards under the force of the wind.
You can also use heat shrink tape, PVC section or other means to secure it..
High gain benefit,greatly improve the talk distance of your radio,Excellent receive and transmit..
Bingfu AM Antenna 75 Ohm FM Dipole Antenna 3-Pin AM Loop Antenna for Sony HiFi Series Sharp Stereo System Indoor Digital HD Radio Bluetooth Stereo AV Receiver Audio Video Home Theater Receiver
7 Sections Telescopic Antenna, Made of Stainless Steel.
Antenna Length: 15cm - 74cm (5.9 - 29 inch).
Mounting Hole Diameter : 2.5mm / 0.1 inch.
Great Antenna Replacement Part for Damaged TV and FM Radio Reception Antenna.
Compatible with Indoor Portable Radio, FM Radio, Home Stereo Receiver, AV Audio video Home Theater Receiver, TV Converter Box, TV Tuner Receiver.
Compatible with Home and Office GSM Alarm System, Wireless Security Sensor Motion Detector Alert, Remote Control Toy Model, Frequency Meter Counter.
Quad Band Mobile Radio Antenna 10m/6m/2m/70cm 29MHZ/50MHZ/144MHZ/430MHZ for YAESU FT-8900R TYT TH-9800 QYT KT-980 Plus KT-8900 KT-7900D
Frequency:29MHZ/50MHZ/144MHZ/430MHZ/118-124MHZ.
Detachable Stainless steel antenna whip,sturdy and durable,easy to operate and install.Bendable design at the bottom of the antenna: you can put down the antenna when into the basement or over the height limit..
Note: To prevent the antenna from folding during driving, you can rotate the collapsible part of the antenna 90 degrees to prevent the antenna from folding backwards under the force of the wind.
You can also use heat shrink tape, PVC section or other means to secure it..
High gain benefit,greatly improve the talk distance of your radio,Excellent receive and transmit..
TYT Original High Gain Quad-Band 29/50/144/430Mhz Antenna for Mobile Radio TYT TH-9800 Plus+Teflon RG316 16.4ft Coaxial Cable+RB400 Bracket Clip
This is an original TYT antenna that with TYT logo. This antenna is designed for TYT TH-9800 car radio. Using this antenna on the TYT TH-9800 car radio, it could achieve the best effectiveness of use..
Four band 29.6 / 50 /144 /435MHz Mobile Antenna for TH-9800 quad band car radio.
Weight: 0.55kg, Length: about 1. 3 meter when full assemble.
HYS TC-300 CB Band HF AMP for CB Band Handheld Radio Transceiver
The most effective working frequency is 10Meter to 15Meter, lower fever and lower VSWR.
About the working general output for AM & FM mode is around 100W and the most effective output is around 200 W with input 5 W and around 200-250 when the input is 10W..
The frequency of the connecting antenna is very significant. It is also should be connect with the amplifier corresponding frequency. If it is lower or higher than the required, it will not work and even will not only burn out the amplifier but also will damage the radio..
If you want to reach the PE MAX output, please check that the input should exactly 10W or 5W, the DC Power should actually be over 14V and 18A and also other conditions should be perfecT. Different mode have the different input requirement..
However, we do not suggest to work the PE Max for a long time,it will decrease the amp' life time and also if the antenna can not endure the output watt, which will damage the amp, thank you very much!.
HYS TW300N CB Band HF AMP for CB Band Handheld Radio Transceiver
The most effective working frequency is 10Meter to 15Meter, lower fever and lower VSWR.
About the working general output for AM & FM mode is around 100W and the most effective output is around 200 W with input 5 W and around 200-250 when the input is 10W..
The frequency of the connecting antenna is very significant. It is also should be connect with the amplifier corresponding frequency. If it is lower or higher than the required, it will not work and even will not only burn out the amplifier but also will damage the radio..
If you want to reach the PE MAX output, please check that the input should exactly 10W or 5W, the DC Power should actually be over 14V and 18A and also other conditions should be perfecT. Different mode have the different input requirement..
However, we do not suggest to work the PE Max for a long time,it will decrease the amp' life time and also if the antenna can not endure the output watt, which will damage the amp, thank you very much!.