Best Meter Thickness Tester Measuring

INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max

  • 【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
  • 【Professional Use】Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
  • 【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • 【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • 【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
Check Stock

DUOYI DY4100 Digital Earth Ground Resistance Tester Multimeter Resistance Measurer

  • 【Application】 Resistance Meter Tester is small and easy to carry. Applicable to the store, post, rail, roommate, chemical, communications, mining and other departments to measure the earth resistance of various devices and the resistance of low impedance conductors..
  • 【Multiple selection】 Range selector switch, 20Ω / 200Ω / 2000Ω / GROUND VOLTAGE. More options, you can select the desired measuring range so that you can use it in many situations.
  • 【Easing Reading】 78x50mm display window LCD display, large screen display value for your reading. LCD display shows measured data and unit symbols. The maximum display "1999 " is more accurate..
  • 【Easy to use】 Self-locking measuring button: Press the test button from the bottom right to start the test. HOLD is a digit hold switch, POWER is a self-locking power switch. Test operating display: This light turns on when testing the correct cabling..
  • 【High Quality Materia】 Thanks to the robust housing, compact internal structure, this resistance meter offers the perfect properties of drop resistance and super long life. Powered by 8 AA 1.5 V alkaline batteries (not included), support low battery indicator..
Check Stock

VIVOSUN Digital PH Meter, 3-in-1TDS EC and Temperature Meter, Plant Soil MoistureTester Combo for Home, Garden and Hydroponics

  • Results are clearly displayed on an LCD screen.
  • 3-in-1 TDS Meter: Also comes with Automatic Temperature Compensation and a long battery life.
  • Shuts off automatically if unused for 5 minutes.
  • Contains an agile titanium alloy electrode.
  • Easy to read the LCD screen and write with the hold function.
  • 3-in-1 Soil Tester: Tests soil moisture, light, and pH—just press one button to switch modes.
  • This tester can test soil moisture so you know when to water your soil.
  • Use this tester to rapidly grow and garden more efficiently.
  • Easy to Use: The pH meter is pocket-sized, lightweight, and easy to use and read—it even comes with a backlight so you can use it in darker areas.
  • The large LCD screen and save function on the TDS Meter make reading and recording a breeze.
  • The 10.8-inch Soil Tester is durable and easy to carry around, plug, and use and no batteries are required.
  • Versatile Application: Testing TDS and pH would greatly benefit your homes, labs, aquariums, swimming pools, hydroponics, and drinking water—it’ll save you money while protecting your health.
  • The 3-in-1 Soil Tester can test soil moisture, light, and pH, and the results will help inform you how to improve plant health.
Check Stock

East Tester Desktop LCR Meter inductance Tester 10~100KHz Continuously Adjustable; 1Hz Step; Support SCPI; (4510, Grey, 3)

  • Lcr meter benchtop Testing frequency 100khz.
  • Capacitance meter capacitor tester Basic accuracy:0.1%.
  • Capacitance clamp meter Interfaces: standard: RS232.
  • Inductance meter tester Support dc resistance (DCR).
  • Inductance meter benchelectrolytic capacitor measurement model,Adjustment of backlight brightness, Chinese and English are optional.
Check Stock

USB 3.0 Tester, Eversame IPS Color Display Digital Multimeter Voltmeter Current and Voltage Monitor, DC 5.1A/30V/150W Power Meter Tester, Test Speed of Chargers, Cables, Capacity of Power Banks-Clear

  • ...5V / 2.4A and MTK-PE (5V / 7V / 9V / 12V).
  • Testers are widely used in the quality inspection of 3C digital peripheral products, and are the first choice for digital gamers and electronic enthusiasts.Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators at a glance.
  • USB internal data line before and after the through mode, it can also be compatible with U disk readings and computer USB interface data transfer voltage and current measurement applications, the use of a more extensive range of USB interface can be used..
  • Featured with over-voltage protection, over-current protection, low-voltage protection, charging time setting and auto-off function, the meter can detect safely and maximally protect the appliances from damaging..
  • Note: The PD charger needs to be connected to your (mobile phone, tablet computer, portable computer) and other equipment during the test. The usb meter will not be turned on by default when no device is connected..
Check Stock

Amprobe DGC-1000A Clamp Ground Resistance Tester

  • Ground resistance tester for measuring ground resistance, current, and continuity in multi-grounded systems.
  • True RMS meter provides accurate readings when measuring linear or non-linear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform.
  • Clamp-on head to measure resistance on a ground rod without the use of additional ground rods and without disconnecting the grounds under test.
  • Measures ground resistance from 0.025 to 1,500 ohms and AC current up to 10A.
  • Safety rated to European Standard 61010-2-32 Category III 300V, Category II 600V.
  • Continuity beep if the resistance is lower than 40.00 Ohms.
Check Stock

Digital Salinity Tester for Salt Water - Aquarium Salinity Meter with ATC, IP67 Waterproof, 0-200 PPT Large Range Multi-Parameter Tester for Seawater, Fish Tank, Hydroponics

  • [Large Salinity Range] Ciztada salinity tester has 2 measurement modes, scale range: 0~9999 ppm/10.0~200 ppt and 0.00-25.00%, which is 2 times than the salinity refractometer.
  • [Automatic Temperature Compensation] Notice: We recommend waiting for a while to observe the measurement results for more accurate reading. Ciztada salinity tester is equipped with ATC part inside, during normal temperature, once calibrated, the temperature change would never affect the accurate of your measuring result..
  • [Easy Reading with LCD Backlight] There is no need to worry about seeing the displayed value if the light is insufficient. Ciztada salinity meter features a green backlit LCD to help you see the measurement results clearly in any situation.
  • [Multifunctional Salinity tester]: The Ciztada multi-parameter Tester can test Salinity, TDS, EC and Temperature in an accurate, quick and reliable manner for most regular water solutions' testing. Support One-tap switch from salinity to TDS/EC.
  • [Wide Applications]: Measures saltwater or salinity of water, ideal for aquarium, marine monitoring, salty pools & spas, koi fish pond, hydroponics and etc.
Check Stock

AgraTronix 30100 Ag-MAC PLUS Grain Moisture Meter

  • GRAIN TESTER: Evaluate moisture content in perishable produce like grains with this electrical meter. The Ag-Mac Plus moisture meter has direct....
  • MULTILINGUAL DISPLAY: The non-compaction design of the agricultural equipment is combined with an LCD Display that can be set to display readings in....
  • USB COMPATIBLE: The electrical moisture tester supports USB port connections for personalization options such as adding a username. The port also....
  • EASY PORTABILITY: Powered by 4 AA batteries, the grain moisture tester comes equipped with a carrying case with handle and strap. This makes repeated....
  • PRODUCT SPECIFICATIONS: The portable moisture meter comes with a carrying case, grain hopper, USB cable and a USB port cover in the box. The crop....
Check Stock

Wood Moisture Meter - Digital Moisture Tester Handheld Pin-Type Moisture Detector for Wood Firewood Wall Paper Drywall

  • 【Accurate and Fast Response】 This wood moisture meter is accurate and reliable for detecting moisture content from wood, paper and building materials. A reliable must-have tool for homeowners, carpenters, painters and architects..
  • 【Wood Measuring professional instruments】 6 scale levels, suitable for a variety of different wood types of humidity measurement. Our wood moisture detector sensor can quickly and easily scan the moisture content of different wood products. Easily check humidity to avoid mildew, cracks and warps before buying or using expensive wood..
  • 【User friendly, easy to understand】 Our digital humidity detector is designed with an easy-to-read large backlit LED screen and has a hold button to freeze readings.This multi-functional moisture tester features a sturdy, durable feel shape and rubber buttons that allow you to comfortably take multiple measurements..
  • 【Sensitive electrode pin】 This pin-type moisture meter with high precision multi-material sensor, no calibration required. After the stainless steel pin is inserted into the surface of the wood or building material, it will support accura....
Check Stock

USB C Tester, 2 in 1 Type C USB Tester Color Screen IPS Digital Multimeter,Voltage,Current,Power,Resistance,Temperature,Capacity Detector,with Clip Cable Support PD2.0/PD3.0,QC2.0/QC3.0,BC1.2

  • ...5V / 2.4A and MTK-PE (5V / 7V / 9V / 12V).
  • Testers are widely used in the quality inspection of 3C digital peripheral products, and are the first choice for digital gamers and electronic enthusiasts.Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators at a glance.
  • USB internal data line before and after the through mode, it can also be compatible with U disk readings and computer USB interface data transfer voltage and current measurement applications, the use of a more extensive range of USB interface can be used..
  • Featured with over-voltage protection, over-current protection, low-voltage protection, charging time setting and auto-off function, the meter can detect safely and maximally protect the appliances from damaging..
  • Note: The PD charger needs to be connected to your (mobile phone, tablet computer, portable computer) and other equipment during the test. The usb meter will not be turned on by default when no device is connected..
Check Stock