SparkFun Qwiic Quad Solid State Relay Kit - Attach 4 Solid State relays to a Single PCB - Control Some serious Power All from The Easy-to-use Qwiic Connect System - configurable I2C
This kit allows you to assemble up to four of these solid state relays on a single PCB and control them all via I2C from your favorite microcontroller..
The Quad Solid State Relay Kit comes with four solid state relays rated up to 40A at voltages between 28-380 VAC so you can switch some serious power with this board all from a single Qwiic connector attached to a low-powered microcontroller..
Features: Operating Voltage: 2.5-3.6V (3.3V recommended). I2C Address: 0x08 (Default), 0x09 (Alternate via jumper). Max Current (Through Relay): 40A (24-380VAC). Zero Cross Trigger. Normally Open Circuit Only.
Vilros Raspberry Pi Pico with Header Complete Starter Kit
Raspberry Pi Pico Complete Starter Kit Includes Basic Items needed to get started with Raspberry Pi Pico Projects.
Includes Storage Bag to protect and keep all the parts neat.
Includes The Raspberry Pi Pico Board with Presoldered Headers featuring the RP2040 microcontroller chip designed by Raspberry Pi in the UK.
Includes: Data and Power Cable--Half Size Breadboard and Jumper wires--Battery Holder (Does NOT include batteries)--Project panel that holds the breadboard and battery holder in place and storage bag.
MakerFocus Raspberry Pi Expansion Board 4 Channel Relay Board Module Power Relay Module for Raspberry Pi 4B/3 Model B+/Raspberry Pi 3/2 Model B (No Programming Required/Programmable)
The product operation guide can be obtained in the product guide and document. This Raspberry Pi expansion board supports Raspberry P.
The Relay Board gives your Raspberry Pi board the ability to control high voltage/high current devices, and easily makes normal home appliances become intelligent. Can be accessed programmatically or directly by shell. Up to 4 layers can be stacked..
Switch the I2C address of the device through the DIP switch on the circuit board to ensure that the four-layer module gets different addresses, thus avoiding the problem of address duplication..
The 4 Channel Relay uses high-quality relay modules combined with the most popular microcontroller technology to communicate with the Raspberry Pi. You can use mulitiple relay modules stacked together to add many channels.
The 4 Channel module is very fast, easy to install, and supports multi-language development, making it ideal for smart home projects.
HiLetgo MCP4725 12 Bit I2C IIC DAC Development Board Breakout Board Internal EEPROM Store Settings for Arduino
The MCP4725 is an I2C controlled Digital-to-Analog converter (DAC)..
A DAC allows you to send analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller..
On board are SCL, SDA, VCC, and another GND for your basic I2C pinout..
If you are looking to have more than one MCP4725 on a bus, the pull-up resistors on this board can be disabled just check the Hookup Guide in the Documents section below for instructions and tips on doing this.store settings.
Digital to analog converters are greInternal EEPROM to store settingsat for sound generation, musical instruments, and many other creative projects!.
The SNAP is a high-quality split 75% keyboard kit with tons of room for customization.
Use the SNAP together, or separate! It snaps together for a traditional 75% layout or pulls apart for use as a split board.
Built around a Pro Micro, rather than a discrete microcontroller. This saves assembly time, and also reduces the build difficulty.
All required parts (diodes, caps, and ICs) are through-hole, meaning they're easy and forgiving to solder.
RGB underglow ready: 10x optional bottom-mounted SMT LEDs shine nicely through the acrylic support material. RGB underglow is supported natively in QMK, allowing for easy programming and configuration.
GeeekPi Electronic Fun Kit,with 3PCS Half Sized Breadboard Cable Resistor LED Potentiometer for Electronic Learning Kit, Compatible with Arduino IDE, UNO R3, MEGA2560, Raspberry Pi Range(Black)
This is an entry-level kit that contains DIY solderable PCB breadboards, male and female Pin headers, LED lights, resistor packages, and jumper packages..
More than 200 pieces of components, compatible with Arduino IDE, Raspberry Pi and other microcontroller boards..
KEYESTUDIO Automatic Smart Plant Watering Kit for Arduino, Automatic Watering System for Your Plants
New Flexible Microcontroller Board --- Raspberry Pi Pico is a tiny, fast, and versatile board. It's based on RP2040 chip, which features a dual-core Arm Cortex-M0+ processor with 264KB internal RAM and support for up to 16MB of off-chip Flash, flexible clock running up to 133 MHz..
Rich Peripheral Set---A wide range of flexible I/O options includes I2C, SPI, and — uniquely —8 × Programmable I/O (PIO) state machines for custom peripheral support..
Multiple Software Support---Raspberry Pi Pico has rich and complete software support and community resources. Programmable in C and MicroPython. Drag-and-drop programming using mass storage over USB..
This kit includes a Rpi Pico with headers soldered, 3-pin yellow header,830 breadboard, Doupont wires and micro USB cable..
ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32 Raspberry Pi
5V 8-Channel Relay interface board, each one needs 70mA Driver Current.
Equiped with high-current relay, AC250V 10A.
Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection..
Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control。For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW.
Orange Pi Zero 2, 1GB Allwinner H616 Quad Core 64 Bit Open-Source Microcontroller 1000M Ethernet Single Board Computer, Support Android10, Ubuntu, Debian (Zero 2)
Orange Pi Zero 2 Mini PC Computer supports decoding of various video formats, such as H.265, H.264, VP9, MPEG -1, MPEG-2, MPEG-4, etc, and the Micro-HDMI output supports 4K display, the GPU has been upgraded to Mali-G31MP2, and supports OpenGL ES 1.0/2.0/3.2, etc..
Orange Pi Zero 2 Microcontroller can cooperate with the adapter board through the 13pin interface to expand the functions of earphone + 2*USB 2.0 + TV out + infrared. In addition, the 26pin expansion function port on the board further enriches the functional interface of the main board and improves the development potential..
Orange Pi Single Board Computers can builed a computer, a wireless server, Games, music and sounds, HD video, a speaker, Android, Scratch.Pretty much anything else, because Orange Pi is open source..
Orange pi zero2 - Tips for Using Orange Pi SBC-Boot up If the OS is not burned, and only power on, there will be no lights on. Burn the correct OS, power on the card, and the light will only light up after the OS is started..
Notice before order: By default, we won't responsible for customs clearance fee charged by your local. If you have any questions, pls contact with Amazon service..
