Best Micrometer For Capacitance Measurement

Digital Caliper Measuring Tool 6 Inch Small Vernier Caliper Electronic Micrometer Machinist Woodworking Tools

  • 【Precise and accurate measurement】: Vodlbov digital caliper measuring range 0 - 6''/ 0 - 150 mm.
  • accuracy up to ±0.001"/0.02mm, resolution up to 0.0005"/0.01mm. The body of the dial caliper measuring tool is made of finely polished stainless steel with knurled thumb rollers and locking screws to ensure smooth sliding and accurate positioning when measuring..
  • 【Three-unit conversion and four measurement modes】: The unit conversion is easy to operate, and the three measurement modes of inch/fraction/mm can be quickly switched with one key.
  • you only need to use one measurement tool to measure internal, external dimensions, diameter, depth and steps..
  • 【Zero Setting Function】 Easy to set zero at any point by pressing the zero button, allows you to start a new measurement at once, ideal for differential measurements. Also zero calibration provides precise results when readouts are not accurate..
  • 【Large LCD Display】: Equipped with an easy-to-read large LCD display that displays instant readings digitally, which is more convenient than any vernier caliper or micrometer caliper.
  • Automatic shutdown after 5-8 minutes of no operation to helps you save battery power..
  • 【Wide application】: Professionals and enthusiasts can use. A great choice for me....
Check Stock

Fowler 54-220-777-1, IP54 Digital Micrometer Head with 0-1\/25mm Measuring Range

  • Micrometer Head: For general purpose measuring applications.
  • carbide-tipped measuring face with an accuracy of 0.00012″/0.003mm for precise readings.
  • Precision Measurements: This digital micrometer with a 0-1"/25mm range has a friction thimble that provides smooth and quiet performance and is suitable for one-handed operation.
  • Easy to Use: Digital micrometer head features an LCD that performs direct inch/metric conversions and has a switchable resolution of 0.00005"/0.001mm.
  • meets IP54 specifications for dust and water protection.
  • Data Output: Digital micrometer with RS-232 output that provides the ability to export readings to a computer (cable not included).
  • Set Includes: Fowler micrometer head, a spare battery, and a battery removal tool.
Check Stock

High Precision HR390 Milliohm Meter 0.001-120Ω Ohmmeter Low Resistance Tester Capacitance Meter Testing Module

  • The resistance measuring range is 0.001 to 120Ω, and the capacitance measuring range is 10pf to 20000uf..
  • The ohmmeter has a measurement resolution up to 1 mΩ, and the high accuracy will bring more convenience to your work..
  • The HR390 resistance meter has small size and light weight which allows easy storage and carrying..
  • With this low resistance ohmmeter, you can accurately and quickly measure resistance and capacitance values..
  • Note: Please do not use it outside the current and voltage range..
Check Stock

BK Precision 891 - Benchtop LCR Meter 300 kHz

  • Test frequency: 100Hz, 120Hz, 1KHz, 10KHz, 40kHz, 100KHz.
  • Large capacity lithium battery power supply.
  • Supporting DC Resistance and Electrolytic Capacitance Measurement.
  • Automatic Recognition of Component Measurement.
  • Support screening and deviation measurement.
  • 2.8-inch TFT display, 4-bit semi-display.
  • Display digit: Main parameters: 5 bits, secondary parameters: 5 bits.
  • Adjustable measuring speed, manual and automatic range.
  • Short circuit correction with open circuit.
  • Standard configuration:1. Mini-USB cable.
  • Adjustment of backlight brightness, Chinese and English are optional,USB device and automatic power-off time.
Check Stock

puseky Digital Multimeter Pen Type 6000 Counts Non-Contact Voltage Resistance Tester Tool

  • Powered by 1pc AA battery ( not included ).
  • Automatically shut down if no operation within 5mins.
  • Automatically identify and measure input voltage, resistance, capacitance etc.
  • Support non-contact voltage measurement, zero live wire detection, phase sequence measurement etc.
  • This pen shaped mutli meter has a maximum display of 6000 counts.
  • LED Flashlight brings much convenience for night operation.
Check Stock

East Tester ET430 Handheld Digital LCR Meter Portable Capacitance Tester Multifunction Digital capacitance inductance Resistance Tester …

  • 2.8-inch TFT display, 4-bit semi-display.
  • Display digit: Main parameters: 5 bits, secondary parameters: 5 bits.
  • Supporting Electrolytic Capacitance Measurement.
  • Automatic Recognition of Component Measurement.
  • Support screening and deviation measurement.
  • Large capacity lithium battery power supply.
  • Test frequency: 100Hz, 120Hz, 1KHz, 10KHz, 40kHz, 100KHz.
  • Adjustable measuring speed, manual and automatic range.
  • Short circuit correction with open circuit.
Check Stock

Fluke - Fluke-279FC/IFLEX 279FC Digital Multimeter with Built-In Thermal Imager with Iflex

  • Full-featured Multimeter with built-in thermal imager.
  • 15 measurement Functions including: AC Voltage with low-pass filter, DC Voltage, resistance, continuity, capacitance, diode test, min/max/Average, AC current (with I flex), frequency.
  • Thermal imaging reveals many electrical issues quickly and safely, eliminating the need for time-consuming testing and validation.
  • I flex expands your measurement capabilities–get into tight, hard to REACH spaces for current measurement (up to 2500 a AC).
  • Fluke connect compatible - save measurements and images while communicating wirelessly with a Smart phone up to 20 feet/6.1 M away (No obstructions).
Check Stock

Microscope Stage Micrometer Calibration Slide (TCM-H) with 4-Scales and 0.01mm Line Resolution

  • Microscope Stage Micrometer Calibration Slide with 4-Scales and 0.01mm Line Resolution.
  • Size of a typical slide (3"x1"), works well with most microscopes.
  • Great tool for microscope measurement and calibration.
Check Stock

Starrett 949 Case only for Electronic Outside Micrometer NO.3734/734 Series

  • The Starrett 949 Deluxe Padded Case is sized to store and protect a single outside electronic micrometer that measures to 1 inch (25 mm)..
  • The case has rounded edges, is made of steel with a vinyl covering, and has fitted foam padding to house an electronic micrometer, a CR2450 battery, and adjustment wrench (sold separately)..
  • The case is an accessory for use only with a Starrett micrometer that measures 0-1” (25 mm)..
  • Fits Model Series 731, 733, 734, 3734, 756, 788, 733.1, 756.1 and 788.1 (Micrometer sold separately)..
Check Stock

Mastech MS2108A Auto Range DC AC Current Digital Clamp Meter Multimeter Voltage Frequency Meter

  • Perform measurements of ac/dc voltage and current, resistance, capacitance, frequency, duty cycle, diode and continuity test.
  • Measuring frequency, ac/dc current and duty cycle by clamp. Relative value measurement and auto range function.
  • Data holding, to hold the readings while taking measurement. Maximum and minimum value measuring and holding.
Check Stock