Best Microphone For Car Exhaust

AUTOSAVER88 2.5 Inch Dual Exhaust Tip, 2.5' Inlet 3' Outlet 9.2' Length Chrome Polished Stainless Steel Double Layer Staggered Exhaust Tip for 2.5' OD Tailpipe, Slant Angle Cut, Weld On, Universal

  • universal fits 2.5″ outside diameter of trucks car exhaust tailpipe (Notice: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: Built from high-strength stainless steel, our chrome exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: The thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: Please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

Cobra 2\ Diameter Chrome Heat Shield 99-0165P

  • 2"X50' Titanium exhaust wrap with (pack of 15)11.8" Stainless Steel(304) Locking Ties.0.08" thickness.
  • Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your exhaust pipe, using overlap to hold it in place and simply use stainless ties to secure the ends in place..
  • High resistance to abrasions, oil spills, temperatures and vibration breakdown..
  • The exhaust heat wrap tape can withstand 1800F direct/2500F radiant heat..
  • Car heat shield wrap can reduces heat under hood up to 50% and improving car and motorcycle performance.
Check Stock

AUTOSAVER88 Universal Dual Exhaust Tip 2.5 Inch Inlet, 2.5' Inlet 3.5' Outlet 9.5' Length Chrome Polished Stainless Steel Exhaust Tailpipe Tip, 2 1/2 Inch Double Layer Staggered Exhaust Tip, Weld-On

  • universal fits 2.5″ outer diameter of trucks car exhaust tailpipe (note: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

Rocomoco Dual Car Carbon Fiber Exhaust Tip Y-style Muffler Pipes Exhaust Tips with Mirror Polishing Stainless Steel, Inlet 63mm(2.5inches) Outlet 89mm(3.5inches)- Glossy Carbon Fiber

  • ...er, and the textured surface is coated with a heat-resistant black coating. Protect the original pipe from the sun and rain to avoid rust and deformation. It has good corrosion resistance to alkalis and most organic and inorganic acids..
  • ▶ 【Easy installation】Ideal for DIY, perfect replacement of old or damaged exhaust nozzles. Just use a wrench to fix the screw to the proper position of the exhaust pipe. If you think it is not tight enough, then additional welding will be a good protective measure..
  • ▶ 【Excellent performance】Using this product is an optimization of your car exhaust system, which can make your car exhaust more smoothly, improve power and enhance your driving experience..
  • ▶ 【What You Will Get】We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the car exhaust tip, please contact us by e-mail, we will try our best within 24 hours to reply.
Check Stock

8MILELAKE Exhaust Pipe Hanger Remover Pliers Compatible for VW Porsche BMW Mercedes Mini Cooper Audi

  • The 8MILELAKE exhaust hanger removal pliers is used to remove rubber exhaust system hangers (i.e. tailpipe, exhaust piper and muffler), with 25 degree offset handles for work in hard to reach areas..
  • The exhaust pliers works on most import and domestic car and truck exhaust systems that use the rubber hanger supports, like fit for Mercedes Benz, BMW, Audi, VW, Mini Cooper, Porsche vehicles.
  • Simply squeeze the pliers slip-resistant handles to force the bracket from the rubber support.
  • The exhaust hanger removal plier is made of high carbon steel, which has strong hardness and durability.
  • Comfortable soft vinyl grips with anti-slip function, easy to use and save efforts.
Check Stock

SYKRSS 2 inch Inlet Muffler Exhaust 2' to 3' Exhaust Muffler Resonator Tailpipe Tips 14.8' Length Tail Muffler with Blue Burnt Exhaust Tip Fit For Car Truck

  • Dimension: 2 inch inlet, 3 inch outlet, Overall Length: 14.8 inch. NOTE : Universal muffler fit 2" OD pipe, but Not fit 2" ID pipe. Please measure the OD of your exhaust pipe before ordering..
  • High Quality Material: SYKRSS exhaust tip built with mirror polished stainless steel & blue plating. Muffler is made of two layers of stainless steel and premium sound-absorbing cotton, which help reduce vibration and absorb sound, durable and Anti-corrosive, never Rusty. Perfectly decorate the exhaust pipe of your car..
  • 2 in 1 Design: This is a 2 inch muffler with blue burnt exhaust tip, design with thick wall straight cut and can be easily weld on the exhaust tip pipe..
  • Wide Application: Universal fits any 2.0" Outlet or 2.1" Inlet trucks car exhaust tail pipe. No instruction is included. Professional installation is highly recommended..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2" muffler, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible..
Check Stock

Pair Intake and Exhaust Camshaft Position Actuator Solenoid Valve Kit For Chevrolet Captiva Cobalt Equinox HHR Impala Malibu GMC Terrain Pontiac G5 Saturn Vue Buick Regal 2.0 2.2 2.4L

  • A camshaft actuator solenoid, normally installed in the front of each cylinder head, is used to precisely control the flow of oil into the camshaft actuator. This changes the rotation of the camshaft to adjust valve timing and valve overlap on the go. These solenoids are used to control both exhaust and intake camshafts, creating the possibility of lower emissions and essentially decommissioning exhaust gas recirculation valves, as well as better performance and fuel economy..
  • There are lots of ways that your car will indicate there is an issue with the camshaft position actuator. The problem is that the same indicators are used to denote all sorts of other problems with the camshaft, its various parts, and the engine. The engine light may come on inside the car, the car may sputter or have trouble starting, or the car may ride roughly once it gets going. You’ll want to get this problem fixed as soon as you notice it..
  • This Solenoid Valve Fits for the Following Vehicles: Chevy Captiva Sport 2012-2015,Cobalt 2006-2010,Equinox 2010-2015,HHR 2006-2011,Malibu 2008-2014.
  • Saturn Aura 2007-2009,Ion 2006-2007,Sky 2007-2010,Vue 2007-2010.
  • Buick Verano 2012-2015,Regal 2011-2015,LaCrosse 2010-2015.
  • Pontiac G5 2007-2010,G6 2006-2010,Sols....
Check Stock

BTSHUB Exhaust Hanger Removal Pliers Rubber Grommets Removal Tool Muffler Rubber Hanger Pliers

  • Used for separating rubber supports from exhaust hanger brackets (i.e. tailpipe, exhaust piper and muffler) with 25 degree offset handles for work in hard to reach areas..
  • The exhaust pliers works on most import and domestic car and truck exhaust systems that use the rubber hanger supports.
  • Compatible with Mercedes Benz, BMW, Audi, VW, Mini Cooper, Porsche vehicles.
  • Features slip-resistant comfort grips, squeeze to remove a rubber support from an exhaust hanger..
  • Made of high carbon steel material provide maximum strength, durability, and leverage.
  • 8 inch (2.1cm) opening fits around metal hanger brackets and against rubber hanger grommet.
Check Stock

Car Exhaust Pipe Tail Throat Universal Exhaust Tip Tail Throat Glossy Carbon Fiber Red Pipe Straight 2.5in Inlet 3.5in Single Outlet for Tail Throat Exhaust Tip Stainless Steel Exhaust Tip Inlet

  • [High-quality ABS material]: This car exhaust pipe tail throat is made of high-quality stainless steel and carbon fiber, corrosion-resistant and....
  • [Compatible model]: This car exhaust pipe tail throat is a general-purpose product, which is commonly used in most cars (total length 6.4in, inlet....
  • [Function]: This car's outer door handle cover can effectively make the exhaust smoother, greatly enhance the power of the car, and give you an....
  • [Simple installation]: Easy to install, no welding, no complicated tools, no damage to the car, easy to use..
  • [Production Guarantee]: From the purchase of raw materials to the factory inspection of products, every link must be inspected, and each link has a....
Check Stock

Ouzorp Size XL Universal Car Turbo Exhaust Whistle, Turbo Sound Whistle Exhaust Tailpipe Blow Off Valve Bov Aluminum Auto Accessories, Fashionable

  • Excellent Performance: This is a whistle of the turbo pressure, the aluminum whistle on the exhaust pipe, and the air through the exhaust pipe to make it sound.Make your car sound like furious, turn your car into king of the road, fashionable and unique, improving your driving interest..
  • High Quality Materials: Brand New and high quality.The Car Turbo Sound Whistle is made of aluminum alloy material, not easy to fade away,anti- ,wear resistance, light weight and durable..
  • Easy to Install: Loosen the screw on the Turbo Sound Whistle,Place the Turbo Sound Whistle body inside the exhaust muffler with the larger opening facing the inside of the muffler.Do not fit piping inlet which is more than 2.5inch.Tighten the bolt so as not to fall off while driving..
  • Warm tips - Please note? The turbo sound whistle is not suitable for extremely curved tail pipes.The big or small of the sound is also related to the thrust of the exhaust and the personal feeling..
  • When you receive the goods, if there are any problem, please contact us and do not directly open the dispute. We promise we will give you a satisfied solution after we confirmed it. We also will give you a positive evaluation..
Check Stock