Boom Arm Mic Stand for HyperX QuadCast，Adjustable Suspension Microphone Stand for QuadCast, QuadCast S – Upgrade C Clamp, 2 Cable Ties, Pop Filter Cover Compatible with HyperX QuadCast S by SUNMON
【Hyperx quadcast boom arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
【Stability】- Mic boom arm is dual suspension springs on each boom arm, protects the HyperX QuadCast S microphone from shaking, sinking and making noise..
【Upgraded Desk Clamp】-The microphone clamp has double larger contact area. Easily clip to any desk up to 2.36''/60mm thick. Soft silicone padding protects your desktop surface from any scratches..
【Cable Sleeve】-Organize your QuadCast microphone connection cables to give you a tidier environment to use..
【Package】- Included: 1x HyperX QuadCast Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Mic Windscreen，2x Cable Ties. Note: NOT INCLUDED HyperX QuadCast MICROPHONE..
Rockville RCM03 Studio Recording Condenser Microphone+Shock Mount+Pro Boom Arm
Package Includes: (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount, (1) Rockville ROGAN STAND Pro Boom Arm Mic Stand with Fixed Mount+Desk Stand+Cable.
Features of RCM03: Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount, Aluminum high quality construction, Polar Pattern: Internally Polarized Condenser Cardioid Design, Large diaphragm for smooth, natural sound and low noise, Power Requirements: 48V DC Phantom Power, Uni-directional, Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ), Output impedance: 200O±30%(at 1kHz),.
Standard operating voltage: 3V, Operating voltage range: 1.5V-10V, Current consumption: less than 500uA, Voltage deduction characteristic: within 3dB at 2V, S/N ratio: More than 24dB, Frequency Response: 30Hz - 20 KHz, Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz, Load impedance: Greater or = to 1000 Ohms, Equivalent Noise level: Less than 18dB A (IEC581-5), Max. Input SPL: 126dB(THD=1.0% at 1kHZ), Electrical current: Greater than 4.8Ma.
Features of ROGAN STAND: Rockville ROGAN STAND Pro Boom Arm Mic Stand, Includes XLR cable built into the stand that is hidden inside the stand for a clean look, Deluxe pro version is one solid piece with no visible springs and an advance....
AT2020 Desktop Mic Stand, Adjustable Height Table Mic Stand with Shock Mount, Pop Filter Windscreen, 1/4 to 3/8 Metal Adapter, Metal Weighted Base, for AT2020 AT2020USB AT2020USB+ AT2035 Mic by Rigych
Upgraded Metal Base - The weighted base design weighs 1.22 pounds so it won’t be knocked over very easily. Metal base with bottom sponge pad, that moving the desktop microphone stand without causing any noise and leaving any scratches on the table..
Adjustable Height - This Screw-in style mic desktop stand is 7.9 inches high and can be adjusted to 12.2 inches for optimal microphone positioning. The desktop microphone stand allows you to sit comfortably and record for a long time..
Professional Shock Mount - It can protect your microphone in all directions through a highly elastic rope design. Great for your recording, reduce the plosive and noise and help improve your sound quality and free your hands..
Easy To Use - The microphone stand is easy to mount and use. Take the pole, insert it into the hole, and twist to tighten it. Allowed you to get rid of space consuming mic stand and you can switch height as needed to achieve different functions..
Widely Application - The desk microphone stand can support many microphones such as AT2020, AT2020USB, AT2020USB+, AT2035 Microphone, also suitable for any other 1.6 in to 1.8 in diameter mic. Suitable for podcasts, live broadcasts, recordings, etc..
AT2020 Mic Stand with Shock Mount and Pop Filter Suspension Scissor Boom Arm with Upgraded Heavy Duty Clamp for Audio Technica AT2020 AT2020USB+ AT2035 Condenser Studio Microphone Frgyee
Heavy Duty Boom Arm: The adjustable microphone arm stand is made of durable steel for heavy duty carry. Max load: Approx.53oz/1.5kg. It offers 360°....
Upgraded Desk Clamp: Compared with other clamps, this metal desk clamp has anti-scratch pad and larger contact area for easily clip to any desk up to....
High Quality Shock Mount: The shockmount can reduce unwanted vibration noises. Like floor tapping, desk bumping. To improve audio recording quality.....
Perfect Improve: Come with a Foam Windscreen. It’s an ideal kit for reducing the plosive, noise, wind interference, saliva spraying during your....
All In One: 1x Wind Cover only for Audio-Technica AT2020 microphone, 1x Shockmount, 1x Mic Scissor Arm Stand, 1x Table Mounting Clamp. Great for your....
SUNMON Microphone Wall Mount and Metal Table Mounting Clamp, Universal Microphone Boom Arm Stand Compatible with HyperX QuadCast, Blue Yeti, Blue Snowball, Shure SM58 Microphone
Widely Compatible: The adjustable arm comes with a standard 3/8" to 5/8" adapter for different shock mounts and microphones. (Note: The microphone and shock mount are not included.).
Double Microphone Mount: The boom arm stand contains two different mic mount, wall mount and table mounting clamp. Satisfy the use of multiple scenarios..
Mic arm stand: The stand arm can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
Upgraded Clamp: The table mounting clamp cab easily clip to 2.36''/60mm thick deskwith 0.47in/12mm hole for mic arm. The microphone wall mount set can Install on the wall, solve the limitation that your desk cannot be installed. (Drill Bit Hole diameter: 15/64" /5.95 mm）.
Package Included: 1x Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Microphone wall mount set, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount), 1x Mic clip. Note: NOT INCLUDED MICROPHONE AND SHOCK MOUNT..
QuadCast Mic Boom Arm Stand with Pop Filter, Adjustable Microphone Boom Arm with Upgrade Desk Table Mount Clamp for HyperX QuadCast, QuadCast S-RGB USB Condenser Microphone by Rigych
Sturdy Mic Stand - The hyperx quadcast arm made of sturdy metal, the dual suspension boom arm stand springs on each cantilever hold the HyperX QuadCast microphone in place without sagging, falling or shaking..
Table Clamp Base - The hyperx quadcast boom arm is equipped with a desk clip. The rubber gasket on the base could protect your desk without any scratches when you rotate the side screw. The metal material makes the entire cantilever support stronger..
Improved Pop Filter - Two-tier design of the pop filter for microphones which can efficiently reduce plosives, wind interference and saliva spraying during recording or broadcasting, and help users get a clear and loud sound..
Easy To Use - The microphone stand is easy to mount and use. Allowed you to get rid of space consuming mic arm and you can switch height as needed to achieve different functions..
All-in-one Combo - 1 pcs adjustable microphone boom Scissor arm stand, 1 pcs two-tier foam pop filter, 1 pcs table mounting clip with rubber gasket, 4 pcs Cable ties and 1 pcs 3/8 female to 5/8 male screw adapter. Note: Not included mic..
Audio-Technica AT2005USB Cardioid Dynamic Microphone and ATH-M20X Professional Headphones Bundle with Knox Gear Desktop Boom Arm Microphone Stand, Shock Mount and Pop Filter (4 Items)
Bundle Includes: Audio Technica AT2005USB Handheld USB/XLR Microphone and ATH-M20X Professional Monitor Headphones Pack, Knox Gear Desktop Boom Arm Microphone Stand, Knox Gear Microphone Shock Mount and Knox Gear Pop Filter for Broadcasting and Recording Microphones.
Rugged Handheld Microphone: This rugged handheld microphone off¬ers two outputs, USB output for audio conferencing and an XLR output that connects with a sound system’s conventional microphone input for use in live performance.
Effective Isolation: Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation.
Studio-Quality Sound: The M20x headphones deliver studio-quality sound and long-lasting comfort, and have a 3.5mm (1/8 inch) output plug that can connect directly to the microphone for convenient monitoring.
Additional Accessories: The pack also includes a tripod desk stand and stand clamp for the microphone, a 6.3mm (1/4 inch) plug adapter for the headphones, and a Quick Start Guide.
Razer Seiren X Mic Boom Arm with Foam Windscreen Suspension Boom Scissor Arm Stand with Pop Filter Cover for Razer Seiren X USB Streaming Microphone by SUNMON
Perfect Boom Arm: Suspension boom arm stand fit your Razer Seiren X Microphone, you can easily adjust the mic to the suitable angle or height to show....
Super Windscreen: Foam pop filter designed for Razer Seiren X USB Microphone with high quality acoustic foam material, filter the unwanted background....
Stability: Mic boom arm is dual suspension springs on each boom arm, protects the microphone from shaking, sinking and making noise..
Mic stand: Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.8"/4.6cm thick. The stand arm can be extended up to....
Package included: 1x Windscreen only for Razer Seiren X Microphone, 1x Mic Scissor Arm Stand, 1x Screw adapter (3/8" to 5/8" Match most microphones....
Seiren Mini Boom Arm Mic Stand with Pop Filter, Adjustable Suspension Boom Scissor Arm Stand with Pop Filter for Razer Seiren Mini USB Streaming Microphone by SUNMON
【Perfect Effect】- Suspension boom arm hold your Razer Mini Seiren USB Streaming microphone in any position you want. No sag, just rock solid..
【Professional Pop Filter】- Foam windscreen cover compatible with Razer Mini Seiren microphones，Pop Filter improves the recording quality by drastically filter out all unwanted background noises..
【Razer Seiren Mini Mic Arm】- Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The stand arm can be extended up to 26.8"/68cm..
【Sturdy Material & Improved Load-Bearing】- The arm stand is made of sturdy steel, it can bear Max weight of 3.1 Pound (1.4 KG). Ideal for podcasting, broadcasting, streaming and voice recording setups..
【Package】- Includes Razer Seiren Mini Mic stand, table mounting clamp, foam pop fiter and 5/8" Screw Adapter. Attention: 1.Not includes Razer Seiren Mini microphone. 2.You should take apart the base of microphone (include the microphone adapter )for matching the adapter before connecting to the microphone stand..
Moukey Boom Mic Stand Desk Adjustable Desktop Microphone Stand with Non-Slip Mic Clip, Short Table Mic Stand with Gear Fixing, Boom arm, 3/8\ and 5/8\ Adapter (Max bearing weight:1.1pounds), MMS-5
Short Boom Mic stand with T-handle - Moukey mic stand desk designed with a boom arm to adjust length and angle based on different necessaries. Metal T-handle adjustment for secure boom positioning.
round boom design with large clamping area. The MAXIMUM bearing weight is 1.1lb. Unique dents anti-slip microphone clip holds your microphone firmly..
Stable Base with Non-slip Rubber - The weight of the round base makes this microphone stand very stable. Three rubber pads on the bottom for moving without any noise, leaving scratches on the table or floor..
Flexible Height Adjustment - This table mic stand height adjustment ranges from 8.66 inches to 14.17 inches with geared lock, making your microphone stable and perfectly positioned at a comfortable height and distance..
Versatile Configuration - Moukey desktop mic stand except suitable for broadcasts, recording podcasts, radio shows, live performances, also can be used for kick drum, kinds of amplifiers, and so on..
Compatibility - The mic stand comes with a non-slip microphone clip and a 3/8 to 5/8 metal adapter, which is compatible with most types of microphones..
