Gemini Sound Bluetooth Dual Active / Passive 15' Inch Woofer 2000W Watts Speaker PA System, XLR Input / Output, 1/4' Inch Mic, RCA / AUX Inputs, USB SD Card, Mixer Stands Cables Microphone Set Bundle
THE ULTIMATE MUSIC PACKAGE: This PA-SYS15 by Gemini Sound is the Complete Dual Speaker PA Package, with One Active and One Passive 15-inch Speaker with 2,000 Watts of Peak Power. Comes with Collapsible Speaker Stands and a Professional Microphone..
PERFECT DIMENSIONS: The Speaker Measures 16.81” inch L x 13.7” inch W x 25.93” inch H and Weighs 57.3 lbs. Includes Two Speakers, Two Heavy Duty Speaker Stands, and One Microphone Only..
MADE FOR THE ROAD: The Speakers in this Pack are Made for Travel, with Side and Top Handles, Flyable and Stand Mountable. Comes with Two Heavy-Duty, Height-Adjustable Metal Collapsible Stands..
CLEAR AND POWERFUL: Features 15-Inch Speakers, One is Passive and One is Active, that Reaches Everyone in the Venue. Comes with Dual Input Channels with Microphone and Line XLR, 1/4”, 1/8”, RCA Inputs, Mix Output, and High/Low Equalization Controls.
TRUST GEMINI, AN INDUSTRY LEADER: History Has Always Been An Important Part Of The Gemini Culture. Since 1974, We've Provided Innovative Products For DJs, Musicians, Sound Contractors and Professional Installers Around The Globe. This Is What Drives Us As An Industry Leader Is DJ and Audio Equipment.Linear frequency response between 50Hz-20KHz.
GRIFFIN Microphone Stand Package of 5 with Vocal Unidirectional Mics & XLR Cables | Handheld Cardioid Dynamic Microphones for Home Studio Recording, DJ Live Streaming & Stage Singing | 20FT XLR Cords
TRIPOD MIC STAND WITH MIC MOUNT - KEEP YOUR MIC SAFE: Pro-grade stands for microphones offer top quality designed for stage performances, seminar presentations, church sermons, and more. The adjustable microphone stand tripod base is sturdier than a round base and harder to tip over. The lighter weight of the tripod base will help keep your wires from the damage caused by a heavy mic stand accidentally placed on top of the wire. Each studio mic stand will also have slip-resistant rubber feet..
TELESCOPIC MICROPHONE BOOM ARM, REMOVABLE MIC BOOM ARM: A perfect microphone stand for singing! Thanks to the microphone arm stands efficient design with 2 interlocking steel pipes, the telescopic boom arm allows you to reach further and provides more flexibility. It can also be removed and converted into a straight microphone stand. Max microphone holder height with boom: 88". Shaft length: 34" to 57". Mic stand boom arm length: 27" to 43". Leg spread width: 20.5"..
MIC ARM STAND INCLUDES PROFESSIONAL 20FT XLR CABLE (BY FAT TOAD): Featuring super low signal resistance, each of these 20 ft long mic cables offers superior clarity and freedom from outside noise interference promising an exceptional, impeccable sound, every time. Boasting oxygen-free, 20 AWG (Americ....
【3-Pack Microphone Holders】Three-pack microphone holders configured with the flexible and strong soft plastic high quality material.
【Taper: 25mm (about 1 inch) to 19mm (about 3/4 inches)】Tapper dimensions of each of the AMC4141 microphone holders are from 25mm to 19mm (front opening: 25mm, about 1 inch.
the rear opening: 19mm, about 3/4 inches).
【Securely Hodling Microphones】Designed to hold your microphones securely and easily with 5/8" X 27 metal threads.
【Including Three 5/8" Male to 3/8" Female Adapters】Three 5/8" male to 3/8" female adapters are included for the microphone clips to be used with the stands configured with the threads with the 3/8" diameter..
【Tilt Angle Adjustable】The tilt angle adjusted easily for your microphone placement conveniences.
Mictop Universal Microphone Clip Holder with 5/8\ Male to 3/8\ Female Screw Adapter Suitable for Handheld Microphones, 4 Pack
✲ Suitable for most handheld microphones, such as: Shure SM58, Shure PGA48/PGA58, ATR2100-USB, Samson Q2U, etc..
✲ High Quality Material - Hard and durable plastic, break resistant mic clip, can be used for a long time..
✲ The clip comes with anti-slip dents which can hold the microphone well..
✲ We provide a 5/8" to 3/8" screw adapter for each microphone clip holder, which can match most boom arms and microphone stands..
✲ PACKAGE & SERVICE: 4 x Microphone clip holder(microphone is NOT included). We promise to provide timely response within 24 hours and lifelong technical guidance..
Blue Tiger Headset/Headphones Boom Mic Covers - Mini Microphone Covers - Foam Microphone Windscreens – Truckers Accessories 3-pack
MICROPHONE COVER SET: This pack of 3 foam mic covers will have your headset looking and sounding like new, with easy replacement in seconds..
UNIVERSAL FIT: The mic windscreen foam covers are designed to fit a variety of headsets with microphones, including Blue Tiger professional headsets..
PROTECTIVE MICROPHONE COVER: Foam microphone windscreens prolong the life of your hard working headset, by keeping your mic safe from dust, saliva and....
NOISE CANCELLING: Keeping your microphone wind foam in good condition increases your headset’s noise cancellation effectiveness..
TRUCKER ACCESSORIES: Blue Tiger microphone accessories are part of our ‘Trucker Tough’ range of accessories for truckers that are made to work and....
Rockville Microphone Stand w/Boom+Tripod Base+Mic+360 Swivel Smartphone Mount
Package Includes: (1) RockvilIe RVMIC1 Microphone Mic Stand With Boom & Tripod Base (Amazing Quality!). (1) RockvilIe IPS55 Smartphone Mount w/360 Swivel For Boom Mic Microphone Stand. (1) RockvilIe RMC-XLR High-End Metal DJ Handheld Wired Microphone Mic w (2) Cables. Features: Adjustable Height. Steel & Nylon Construction. Virtually Unbreakable (under normal use). Small Cable Guiding Clips for running cables along the stand. Black Color. Adjustable Height Range: 43-70 inches. Boom: 30 inches.
Leg Diameter: 0.75 inch. Top Tube Diameter: 0.6" inches. Lower Tube Diameter: 0.6" inches. Boom tube size: 0.79 - 0.39 inch. Easy adjustment, just turn the clutch and you can raise or lower the stand. Features: RockvilIe IPS55 Smartphone Mount - Attaches To any pole or stand with a diameter of 17mm 35mm. Dual knob adjustment for an extra secure fit. 360 degrees swivel rotation with tilt for portrait or landscape viewing. Securely Holds Your Smartphone w/otterbox case (up to 4.1" wide).
Designed to be compatible with almost all smartphones. Designed to securely attach to sheet music stands, mic stands, and boom arms with a diameter of 17mm 35mm. Tool free installation just Twist the knob to release or secure on to post. Two-way assembly allows the clamp to be moun....
K&M König & Meyer 23850.311.55 Microphone Desk Boom Arm Stand | Thread Connector | Wide Table Clamp Range For Smooth Surfaces / Tubes | Mic Cable w/3 Pin XLR Plug Connector Incl. | German Made | Black
INNOVATIVE LEADER IN STAND TECHNOLOGY: This best-selling stand allows for maximum durability and stability so you can keep focused on your music. The K&M Microphone Desk Boom Arm stand is easy to assemble, adjust and is preferred among all musicians..
CALLING ALL MUSICIANS: Mount to table or shelf with up to a 2” width. Pivot and position the 37" extending boom arm. Use the ⅜ or 5⁄8 thread connector to firmly hold a 1.7lb mic or heavy condenser microphone. Perfect for Djs, audio recordings or podcasts.
TRUSTED DESIGN: A pre-routed 3 pin XLR 196.85” cable runs through the arm eliminating clutter and having to tape or velcro loose messy dangling cables. A sturdy C-clamp makes set up and break-down a breeze and provides years of service at a great value.
SUPERIOR QUALITY: Reflecting our commitment to world-class construction, the Microphone Desk Boom Arm Stand is made in Germany. Designed with the highest standards, we offer a 5-year product warranty and 10-year on replacement parts availability..
ECO-FRIENDLY: For over 70 years, K&M is the desired brand for stands and holder accessories. Committed to environmental impact. Protection and responsible resource consumption, our eco-conscious company has an ISO- 14001 environmental certification..
Blue Yeti Microphone Shock Mount - Mic Holder Compatible with Blue Yeti Yeti Pro Snowball
Applicable Microphone Models: Compatible with the mics of Blue Yeti, Yeti pro, Snowball..
Excellent Anti-vibration Performance: Blocks unwanted vibrations for Enhanced Sound Quality. Suitable for emerging musicians, gamers, Vloggers,....
Multi-Function Interface: The shock mount is compatible with 3/8 and 5/8 threaded interfaces together, which can match most microphone stands, no need....
Equipped with protective pad: Insert a sponge pad into the microphone installation interface to protect your microphone from wear..
Materials and Performance:Strong and durable, high-quality aluminum alloy material can guarantee years of use. It will never shake or fall after....
【Adjustable Positioning & Flexible】The gooseneck tabletop microphone arm stand comes with two flexible shaft that can be adjusted which provides up to 19 inch of length and easy microphone direction, in the best possible location for sound to your PC gaming, dragon voice dictation, and talk to Cortana. You can easily adjust it to get the best pickup..
Adjust your microphone 360 degree to the perfect spot with the flexible gooseneck arm stand. Microphone Clip Diameter Max to 35 mm/1.38 inch, which is compatible with many standard handheld mics. The additional 3/8" to 5/8" screw adapter works perfectly with Blue Yeti, Blue Yeti Pro, Snowball and other microphones. (Can’t support Blue Yeti Nano).
【Sturdy and Solid Build】The streaming microphone arm stands is constructed from durable metal and ABS. A sturdy desktop clamp base mounts to table ensures a firm support for long gooseneck. The headset hook is integrated into the desk clamp.The sponge on the base could protect your desk without any scratches..
【Easy to Mount and Portable Design】The super flexible Microphone snake clamp stand is ideal for mounting your microphone anywhere you need it - desk, podium, pulpit, coffe....
K&M König & Meyer 23860.311.55 Microphone Desk Boom Arm Stand | Thread Connector | Wide Table Clamp Range For Smooth Surfaces / Tubes | Extra Long Mic Cable w/3 Pin XLR Plug Incl. | German Made Black
INNOVATIVE LEADER IN STAND TECHNOLOGY: This best-selling stand allows for maximum durability and stability so you can keep focused on your music. The K&M Microphone Desk Boom Arm stand is easy to assemble, adjust and is preferred among all musicians..
CALLING ALL MUSICIANS: Mount to table or shelf with up to a 2” width. Pivot and position the 37" extending boom arm. Use the ⅜ or 5⁄8 thread connector to firmly hold a 3.3lb mic or heavy condenser microphone. Perfect for Djs, audio recordings or podcasts..
TRUSTED DESIGN: A pre-routed 3 pin XLR 236” cable runs inside the tube eliminating clutter and having to tape or velcro loose messy dangling cables. A sturdy C-clamp makes set up and break-down a breeze and provides years of service at a great value!.
SUPERIOR QUALITY: Reflecting our commitment to world-class construction, the Microphone Desk Boom Arm Stand is made in Germany. Designed with the highest standards, we offer a 5-year product warranty and 10-year on replacement parts availability..
ECO-FRIENDLY: For over 70 years, K&M is the desired brand for stands and holder accessories. Committed to environmental impact. Protection and responsible resource consumption, our eco-conscious company has an ISO- 14001 environmental certification..
