Best Mill Bits

SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8 Tapered End Mill Cone Ball Nose Carbide Bit CNC Cutter for Carving Engraving

  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge.
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance.
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch.
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated.
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
  • For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..
Check Stock

SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

interjunzhan Micro Drill Bits, 50Pcs Durable Tungsten Carbide PCB Micro Drill Bits Set for Circuit Board Engraving Tool Drilling Tool Model Making 0.5-0.9mm 50pcs

  • Contains 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm size drill bits, each of which has 10, can provide you with a variety of work operations..
  • These end mill engraving heads are an ideal alternative to your CNC or PCB machinery..
  • Has sufficient bending strength and abrasion resistance..
  • Excellent processing technology can make your engraving more stable and accurate..
  • Made of ultra-fine grained cemented carbide material with good milling performance to ensure efficient work..
Check Stock

Kodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8\ Shank, 1/2\ Length of Cut, 1-1/2\ Overall Length, 1/8\ Diameter

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Ball Nose End Mill Assorted R0.75 Tip 1/8\ Tapered End Mill TiAlN Coated CNC Router Bits Carbide Bit CNC Cutter for Carving Engraving

  • [ Size ] Tip Radius: 0.75mm, Cutting Length: 9/16" (15mm), Shank Diameter: 1/8" (3mm), Full Length: 1 9/16" (40mm), 2 Flutes..
  • [ High Quality ] The end mills are made of top quality imported tungsten steel carbide that is very tough, resists wear and offers high cutting performance..
  • [ TiAIN coated Design ] TiAlN Coated for high hardness and heat resistance enables the tool has long life..
  • [ Applicable Materials ] The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc..
  • [ Package Including ] 1PCS R0.75 Tip Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge..
Check Stock

Boquite Engraving Jewelry Machine Tools, Engraving Handpiece for Pneumatic Engraving Machine——Metal Engraver Hand Tool

  • ★【ERGONOMIC DESIGN】 Engraving Machine, Machinist Tools, The product is lightweight and convenient. Ergonomic design with overmold allows long-time working be more relaxing and cozy..
  • ★【HIGH QUALITY】 Engraving Tool, Die Grinder Made of high-quality metal material, durable in use，smooth surface, low vibration during operation and low calorific value..
  • ★【WIDELY USED】 Pneumatic Engraver, Pneumatic Tools, Special designed for pneumatic engraving machine,commonly used in the processing of jewelry and crafts. Such as grinding, drill, mill and other auxiliary applications to better assist them in their work..
  • ★【PRACTICAL】 Metal Engraver, Air Tools, Engraving cutting bits Jewelry tool for pneumatic impact engraving machine. User-friendly anti-slip rubber gasket design, considerate and practical..
  • ★【AFTER SALES SERVICE】 Engraving Machine For Jewelry, If you have any problem, please feel free to contact us, we will do our best to provide customers with 100% satisfaction solutions..
Check Stock

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....
Check Stock