Best Milling Machinery

5\ x 10' (5 inch diameter by 10 feet long) Ultra-Flex Clear Vue Heavy Duty PVC Dust, Debris and Fume Collection Hose - MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

6 x 10 6 inch diameter by 10 feet long Ultra-Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose - MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

Wood Lathe Chuck 4 Jaws Chuck 6inch lathe chucks for woodturning 1inch x 8TPI Thread Lathe Chucks for Woodworking

  • 【EXCELLENT QUALITY】:The well-designed chuck body is made of high-quality iron. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck..
  • 【APPLICABLE WORKPIECE SIZE】:Internal Jaw Clamping Range: 0.47-2.2inch (12-55mm). External Jaw Clamping Range: 0.74-5.1inch (19-130mm)..
  • 【FREE ACCESSORIES】:We will provide you with a set of installation tools. These can help you better install the chuck on the lathe..
  • 【HIGH PERFORMANCE JAWS】:Each jaw can be adjusted to center respectively with superior gripping force, this improves chuck flexibility, clamping most shaped workpieces can also be realized..
  • 【APPLICATION】:Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock

ChgImposs 1/4' Thread Flexible Water Oil Coolant Pipe Hose, Round Nozzle Adjustable Plastic Cooling Tube with Switch for CNC Machine/Milling/Lathe/Hydraulic Machinery/Water Cooling System

  • Made of plastic, non-poison, resistant to corrosion and tension, flexible, has long lifespan, easy setting..
  • This cooling tube adopts a plastic flexible body, light weight and easy to install with any direction and angle..
  • Designed with a convenient valve so you can easily open or close fluid..
  • Widely used for lathe, milling, CNC machine, hydraulic machinery and water cooling system. Adjustable body make it easy to change the shape and angle to meet your need..
Check Stock

Dorhea GT2 2GT 5mm Bore Aluminum Tooth Timing Belt Idler Pulley 20 Teeth 5mm Bore for 3D Printer Accessories 6mm Width Timing Belt (Pack of 5 pcs)

  • Material: High quality Aluminum,sturdy and durable, adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively.
  • Tooth timing blet pulley, use with 20 Teeth 5mm bore idler pulley.
  • Use High-quality Motor-grade bearings to ensure that the machine is works good.
  • Suitable for 6mm width timing belt, widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasion.
  • Package include : 5 pcs teeth timing belt pulley, each of the two sides with wheels were mounted bearings.
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

Calculated Industries 4088 Machinist Calc Pro 2 Advanced Machining Calculator | Speeds and Feeds, DOC, LOC and WOC for Materials and Tool settings | Machinists, Setters, Tool & Die Makers, Shop Owners

  • ... speeds, chip-load. Also solves bolt pattern layouts, 3-wire measurements and more.
  • EASY TO USE SOLUTIONS help you resolve common challenges faced by pros.
  • dimensional math and unit conversions including a handy “mils” key, Plus right triangles, angles and trig. Built-in answers provide the recommended ideal for machinery but also provide minimum and maximum guides so you can use what works for your project or go by the handbook.
  • INVALUABLE TOOL PAYS FOR ITSELF by reducing headaches, saving time and preventing expensive material errors on all your projects, from the office to the shop. Comes with a rugged shock, dust and moisture-resistant Armadillo gear Protective case, quick reference guide and complete users guide, a long-life battery and a one-year limited.
Check Stock

BALITENSEN 5pcs Toothless GT2 Idler Pulley 20 Teeth 3mm Bore for 3D Printer 6mm Width Timing Belt (Bore 3mm, 20 Teeth) (20Teeth-3mmBore-6mmWidth-Smooth, 5)

  • Material: Aluminum, Adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively..
  • Teeth Type: 20 Teeth , Bore 5mm. Suitable for 6mm Width Timing Belt..
  • Use Double bearings Motor-grade bearings to ensure that the machine is works good..
  • Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions..
  • After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, BZ 3D is committed to providing you with the best service!.
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Utoolmart Flexible Coolant Pipe, G3/8 Thread Round Nozzle Coolant Pipe Hose, 16' Length Adjustable Flexible Cooling Tube, for Lathe Hydraulic Machinery and Water Cooling System, 3 Pcs

  • 【Thread Diameter】- G3/8 Male Thread ( 16mm/0.63" diameter ).
  • Total Length( Approx.): 400mm / 15.75-inch.
  • Package Content : 3 x Flexible Coolant Pipe.
  • 【STRAIGHTFORWARD DESIGN】- This cooling tube adopts a plastic flexible body, light weight and easy to install with any direction and angle..
  • 【MATERIAL】- Made of plastic material, it features non-toxic, resistance to corrosion and tension, flexible, and long service life.
  • 【APPLICATION FIELD】- It is widely used for lathe, milling, CNC machine, hydraulic machinery and water cooling system..
  • 【SATISFACTION SERVICE】 We care for every customer’s feeling.If this product does not meet or exceed your expectations,please send email to us or return the item back..
Check Stock