Best Milling Tool Kit

Milling Bronze Gear,Power Feed Bronze Gear Bridgeport for Bridgeport Milling Machine

  • 【BASIC PARAMETERS】GPOAS X-Axis power feed is made of aluminuml.
  • Power Parameter:90Watt,110V input voltage,50/60Hz,single phase.
  • Rotate Speed:0-200 RPM.Max Torque:450in-lb.
  • Max return speed: 850mm/min.This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc....
  • 【PORTABLE AND EASY TO INSTALL】This power feed for milling machine is compact and portable.Weight: 3.75kg/8.27lbs, Size: 7*3.5*12.8 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.After-sales:You will get worry-free 18-month warranty and lifelong technical guidance..
  • 【STABLE AND EFFICIENT】This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.And when fast transmission, if the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage..
  • 【AUTOMATIC AND MANUAL CONTROL】You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting....
Check Stock

7pcs/Set Roughing End Mill HSS CNC 4 Flutes Milling Cutter End Mill Router Bit Roughing Chipbreaker Tool M6/M8/M10/M12/M14/M18/M20

  • MATERIAL: 4 flutes milling cutter end mill is adopted of high quality high speed steel for durable and long serving life.
  • EFFICIENCY: End mill cutter has good milling and cutting performance, ensure the high efficiency of the work..
  • HIGH QUALITY: Sufficient bending strength and wear resistance, slot milling, hole and the edge of the board, the surface is clean, neat, no glitches.
  • LONG LASTING: High strength, resistance to bending, breakage resistance, and have excellent physical properties, long tool life.
  • APPLICATION: Cnc router bits are suitable for CNC data processing center, carved, high-speed machines.
Check Stock

chainsaw mill Portable Chainsaw mill 36 Inch steel and Aluminum Planking Milling Bar Size Cutting Milling

  • High Quality, steel and Aluminum Construction,Lighter and stronger.
  • Chainsaw mill 36 inch length fits chainsaw bar length 10"-36”.
  • Chain Saw Mill works for 36" diameter logs, Planking Milling Height & Width Adjustable.
  • Turning your chain saw mill to a portable milling machine.you can mill your own lumber at home or in the woods.
  • 100% Satisfaction Guarantee. lifetime warranty.
Check Stock

chainsaw mill Portable Chainsaw mill 36' Inch steel and Aluminum Planking Milling Bar Size Cutting Milling (36“)

  • High Quality, steel and Aluminum Construction,Lighter and stronger.
  • Chainsaw mill 36 inch length fits chainsaw bar length 10"-36”.
  • Chain Saw Mill works for 36" diameter logs, Planking Milling Height & Width Adjustable.
  • Turning your chain saw mill to a portable milling machine.you can mill your own lumber at home or in the woods.
  • 100% Satisfaction Guarantee. lifetime warranty.
Check Stock

8Pcs Carbide Burr Set 1/4''(6.35mm) Shank for Metal Tungsten Carbide Double Cut Rotary Cutting Burr Set Die Grinder Bit Grinding Polishing Carving Tool

  • ✔Quantity: 8-piece carbide grinder rotary file burr tool set SA-5,SA-3,SC-3,SC-1,SD-3,SD-1,SF-5,SF-3, with box size: 140x110x25mm.
  • ✔Double-cut style has rows of cutting teeth cut in two intersecting directions, Unique tooth angle prevents chipping for the longest lasting design possible..
  • ✔Grinder drill is must-have kit for woodworkers and enthusiasts, they need to clean the welds frequently or use metal for cleaning,easy to grasp and use, safe and reliable.
  • ✔Carbide burrs sets fit most small rotary tools,die grinders,for woodworking drilling carving engraving milling porting, metalwork, tool making, model eng, cylinder head porting and deburring etc..
  • ✔Made of heat-treated tungsten carbide material, Used for metal working in mold and pattern making, die sinking, surface cleaning and maintenance,perfect for opening holes, or porting heads on ferrous materials..
Check Stock

3/25 Inch 3mm Straight Shank Cemented Carbide 90-Degree Spot Sample Drill, Suitable for Fixed-Point Drilling Or 90-Degree Chamfering and Deburring of Workpieces, High Smoothness (3mm)

  • Strong And Wear-Resistant: A Milling Cutter Is Made Of High-Quality Tungsten Steel Base Material With Advanced Quenching Technology As The Base Material, Which Greatly Improves The Wear Resistance And Strength, And Increases The Service Life Of The Milling Cutter..
  • Sharp Edge: Adopt Advanced Sharpening Equipment, Fine Processing To Ensure That Each Tool Is Finely Processed, Wear-Resistant, Durable, And Smooth..
  • Wide Range Of Applications: Suitable For Ai Intelligent Robots, Drones, Automobiles, Dental Orthopedics, Aerospace, Household Appliances, Mold Processing And Other Fields. Choosing The Right Tool Will Make You More Convenient, Faster And More Efficient..
  • Sharp Large Rake Angle: After Years Of Continuous Research And Development And Innovation, Continuous Improvement Of The Process, The Sharpness Of The Large Rake Angle Has Been Greatly Improved, Thereby Reducing The Generation Of Cutting Heat And Solving The Problem Of Sticking From The Root..
  • Good Processing Effect, Improve Efficiency And Extend Tool Life.
Check Stock

Chuck Holder, Milling Tool Holder Not Rusty for Processing Steel and Cast Iron

  • Furthermore, this milling arbor adapter is suitable for processing steel and cast iron, soft stainless steel and aluminum..
  • Easy to use and not rusty, such chuck holder is easy to use in the practical life..
  • With good chemical stability, heat resistance and abrasion resistance, the holder is in high hardness..
  • After many inspections before leaving the factory, the quality is guaranteed, you can use it with confidence..
  • Made of high-quality hard alloy cutter head, the milling tool holder is with exquisite workmanship and durable..
Check Stock

OSCARBIDE Carbide Inserts TPG322 Turning Inserts TPGN160308,Tin Coated for Lathes and Mills,10 Pieces/Box.

  • Indexable Carbide Milling Insert 1/8" Thick, 1/32" Radius,11 degree relief angle..
  • Carbide Cutters material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • Carbide Bits for turning and milling carbon and alloy steels, tools steel and stainless steel.
  • Screw on triangle style insert with a chip breake.
  • 10 pieces per box, provides longer tool life than uncoated grades.
Check Stock

Akozon 5pcs M3-M8 Pilot Slotting Counterbore Mould End Mill Cutter Solid Slot Countersink End Mill Drill Bit

  • 【Main purpose】: Countersunk end mill is a specially manufactured tool, mainly used to cut holes that allow bolts or screw heads to be screwed into..
  • 【High precision】: The cutting hole and bottom hole of this tool have high alignment accuracy. Because of its high production efficiency, it is often used in the machining industry..
  • 【High-quality and durable】: The Pilot Counterbore End Mill Cutters is made of hard high-speed steel, with high toughness, wear resistance, and high hardness for high-speed cutting.
  • it is usually used for assembly on a milling machine..
  • 【More time-saving】: Countersunk cutters reduce the time to change tools, improve the efficiency of machine actuator movement and save manufacturing time..
  • 【Wide range of applications】: Counterbore bit set is suitable for milling of copper, aluminum, steel, cast iron, etc., and can be directly processed or finely processed to heat treatments..
Check Stock

Carbide Milling Inserts TPCN32PDTR TPG32 Mutilayer Coated Carbide Turning Inserts for indexable End Mill,10pieces/Pack

  • TPCN32PDTR(TPCN1603PDTR) Indexable Carbide Milling Insert 1/8" Thick,11 degree relief angle..
  • Material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • For turning and milling carbon and alloy steels, tools steel and stainless steel.
  • Screw on triangle style insert with a chipbreaker.
  • 10 pieces per box, provides longer tool life than uncoated grades.
Check Stock