212CC Torque Converter Kit Go Kart 30 Series 6.5 HP Mini Bike Comet Clutch Set 3/4 Inch 10T #40/41/420 Chain Predator Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter
Package Included: 1 x 3/4″ Driver clutch bore, 1 x Overall Diameter 6″ (5/8″ driven pulley), 1 x 10 Tooth Sprocket for #40 #41 #420 Chain (Chain not included), 1 x Drive belt, 1 x Plastic Assy Cover, 1 x Full Mounting hardware Kit, 1 x Aluminum Mounting Bracket Plate. (As Pictures Shown).
Engine Compatability: 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine. 3/4″shaft with flat key.
Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton and clones, Kohler, Lifan, Robin, and Tecumseh motors.
Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM.
however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments.
YUEWO Bicycle Motor Kit 80cc 2-Stroke Motorized Bike Kit, DIY Petrol Gasoline Engine Bicycle Conversion Set with Speedometer for 24', 26' and 28' Bikes
80cc 2-stroke bicycle motor kit with Speedometer: Includes all the parts and accessories needed to convert a regular bike into a gasoline-powered motorcycle. Perfect for most type 24″, 26″ and 28″ bikes with V-frame, such as mountain bikes, road bikes, cruisers, choppers, you can enjoy a faster ride..
Convenient Operation: This great design makes bike easy and quick to put together.
riders just need to fit the motor to the frame, connect the cables, and fill up the gas tank in order to be ready for their first ride..
Powerful Engine: Equipped with the single cylinder, air-cooling, 2-stroke 80cc single cylinder gasoline engine. It adopts first-rate steel material, of great strength and hardness for endurance, which can provide you with a long service life..
Ignition Safely: Capacitor discharge ignition method, which is safer and more stable in use. Therefore, this type of ignition will not cause the wear and tear on the contact points when the bike engine is spinning at high speed, which ensures high performance and durability..
Faster Speed & Fuel-efficient: Fast and smooth, can speed up to 50km/h. It almost runs as fast as a motorcycle or scooter, making your outdoor trip more convenient. With a 2L fuel tank and a fuel-efficient single cylinder ga....
49CC 2 Stroke Engine Motor Racing Complete Engine Motor Pull Start Motorized Bike Engine Kit for Mini Pocket Bike Scooter Dirt Bikes ATV Quad Motorized Bicycle (Minimoto Engine(B))
【MAIN PARAMETERS 2】Start Way: Recoil pull start, new style recoil, easy to pull start.
Recoil Starter Material: New style easy pull starter.
Application: for most air cooled mini dirt bikes.
Package size: 34cm x 25cm x 15cm (13'' x 10'' x 6'').
【COMPLETE ENGINE MOTOR】This Engine is complete with high performance cylinder head, plug, powder coated metal pull start, air filter and 14mm/0.55'' carburettor, balanced crank, balanced flywheel, ported piston windows, up-rated CVT transmission unit..
【HIGH EFFICIENCY ENGINE】49CC mini motor air cooled racing engine capable of achieving 40mph dependant on user weight and terrain. 【MAIN PARAMETERS 1】Cylinder Numbers: Single cylinder,.
【CUSTOMER HAPPINESS IS OUR PRIORITY】: We stand by and believe in our products 100%! If you have any problems, contact us and we will find a solution together!.
DONSP1986 Bicycle Gas Frame with Gas Tank Built in, 2.4L Frame -Gas Motorized Bicycle (Brushed Alum)…
Brushed Alum Bicycle Gas Frame Requirement on seatpost:27.2mm, Note: If buyers' bike rear wheel is with quick release,we suggest buyers do not buy the gas frame unless buyers are professional.
Reinforced Gas Frame Brushed Aluminum w/2.4L gas tank Designed for the 2-cycle engines 48cc/60cc/66cc/80cc with 40 to 50mm wide front mount stud spacing.
this frame can be painted with any color..
Rear Disc brake bracket and V brakeing system.
Frame made especially heavy duty for gas engine applications Available with 135mm rear frame width for either single speed or multi-speed bikes..
38mm diameter downtube 70 degrees angle V frame.
PLEASE NOTE 1: the best safe speed if racing: 35km/h；Head tube: 150mm.
The Manta Cafe Racer Gas Tank - Black - Motorcycle Gas/Fuel Tank 3.2 Gallon 12L
The Manta, cafe racer style black gas tank. Great tank for smaller custom bikes!.
Tank capacity: 3.2 gallons (12 liters), Material: Steel.
See photos & description below for dimensions.
Modification to the motorcycle frame may be required to mount the tank on bikes other than the AX100. Check photos and dimensions before ordering. On close inspection the tanks are not perfect and may have some minor superficial imperfections..
The 4-Stroke engine ensures that no confusing fluid mixing will be required, just gas it up and start riding!.
19" Front and 16" Rear big Tires are great for speed and traction making them a perfect tire to ride off road with. You can push the envelope of your 149cc Dirt Bikes with these..
Adjustable Rear Mono Shock provides extra comfort while riding on rough terrain. It will keep you safe while taking your 149cc Dirt Bike to its limits..
Some assembly required: Assembly for dirt bikes include Handle bar brackets, wheels, brakes, number plate and fender. (May differ per model).
DONSP1986 Reinforced Bicycle Gas Frame with Gas Tank Built in, 2.4L Frame -Gas Motorized Bicycle (Black)
Gas Frame 2.4L Requirement on seatpost:27.2mm, Note: buyers need know how to fasten the motor on the pedestal mount of gas frame to prevent crack from vibration which maybe caused crack of frame.
Reinforced Black bicycle gas frame Built-in 2.4L gas tank Designed for the 2-cycle engines 48cc/66cc/80cc with 40 to 50mm wide front mount stud spacing.
Rear Disc brake bracket and front mount pedestal works well with gas motor front mount bolts 8mm.
Frame made especially heavy duty for gas engine applications Available with 135mm rear frame width for either single speed or multi-speed bikes..
38mm diameter downtube 70 degrees angle V frame, the width and Inner Diameter of the bottom bracket:68mmx50.8mm/2.677inx2in.
PLEASE NOTE 1: the best safe speed if racing: 35km/h；Head tube: 150mm.
This product Comes with 12months Warranty. Any questions,please contact us firstly! we can help you solve the problem until you are satisfied..
AlveyTech #40/41/420 Chain 48 Tooth Sprocket for Go-Karts & Mini Bikes
48 tooth sprocket for use with #40/41/420 chain..
Heavy-duty machined steel construction. Used on many go-karts and mini bikes..
Our #40/41/420 chain 48 tooth sprocket for go-karts (and mini bikes) is ready to transfer the radial power of your engine's crankshaft to the drive wheel..
Keenso 49cc Pocket Bike Kill Switch, Universal Mini Quad Dirt Bike Stop Kill Switch Button Fit for 22mm Handlebar 49cc Motorcycle Safety Engine Stop Switch
【49cc Pocket Bike Kill Switch】-- Use of high quality material to ensure its durability and security. This is a perfect choice if you are in need of a mini bike kill switch.
【Compact & Beautiful】-- The single wire kill switch is small and compact switch, light and beautiful appearance. Such a practical tool you will need it.
【Easy to Use】-- Momentary flameout / ignition switch for mini motos, means the button is spring loaded and you can just push down to operate.
【Simple Installation】-- Easy installation and the pocket bike kill switch can fit for standard 22mm mini moto handlebars, more convenient for using.
【Fitment For】-- Fit all models of the mini moto quad, dirt bikes and race bikes with air or water cooled.
