Best Mini Itx Gaming Build

2 x 8dBi 2.4GHz 5GHz 5.8GHz Dual Band WiFi RP-SMA Male Antenna+2 x 35CM U.FL/IPEX to RP SMA Female Pigtail Cable for Mini PCIe Card Wireless Routers PC Repeater Desktop FPV UAV Drone PS4 Build

High gain WIFI antenna- This 8dBi Omni-directional antenna with dual band 2.4GHz / 5.8GHz and RP-SMA Male connector which reduces interference, extend wireless range to dead spot.
Pigtail Specifications- Coming with 2 pieces connector cables,Length: 35cm including the connectors.
Connector type: U.fl / IPEX (MHF2) to RP-SMA Female.
High quality- The WIFI antenna case is made of hard plastic, sturdy and durable. The internal is using high quality circuit board ensures maximum and stable signal quality.
Multi-use- This wireless antenna works with most wireless devices, such as Mini PCIe Wireless Card Routers / Repeater / Range Extender / Desktop PC / Mini ITX Build / PCI Card / FPV UAV Drone / PS4 Build. WARM NOTICE: this wireless router antenna only use for MINI PCI-E Interface, Do Not Use for M.2 (NGFF) Interface, please check your connectors before buying.
Easy to install- This wireless wifi antenna is easy to install, Simply replace current antenna to increase signal strength.

This Mini Computer Power By Intel Core i9-9880H Processor,8Cores 16Threads 2.3GHZ, Max to 4.8GHZ,.
This Gaming PC adopt Dedicated Graphics Design, With Nvida Special High Performance GTX1650 4GB GDDR5 Graphics,Make sure your design Gaming and Other....
This Mini Gaming PC Have a Ram of Sodimm 32GB DDR4( 2X16GB,Max to 64GB), With a Storage of 1TB NVME SSD, Max to 4TB, Suport additional 2.5inch HDD/SSD.
This MIni PC Build in intel AX210(2400M/bps) Wifi 6,Bluetooth 5.2, Gigabit Ethernet,[email protected] OUTPUT.
This Desktop Computer Pre-install Windows 11,Support linux,Auto power on, We have Special Technical support and after-sales service.

[ Silent RGB PSU ] RGB power supply provides you colorful lighting effect and will light up the whole PC build. 120 mm fan and honeycomb design ensure power supply running under a cool condition. Plus the tested decibel is 42 (d) BA, helping gaming players create a quiet gaming environment..
[ High Quality Components ] 650W Power supply is equipped with good quality capacitors, ensuring durability, long-term stability and higher efficiency. At typical system load, the efficiency conversion rate reaches to 88%. High-end components make it perform well..
[ High CompatibIe PSU ] 650W PC PSU fits to itx/matx/atx pc cases. Suitable size (5.5*5.9*3.3 inch) and enough cables and connectors help you realize installing more pc parts..
[ 80+ Bronze Certificated ] Musetex power supply outputs stable voltage, and it is applicable to 115V to 230V. PSU MU650 works up to 88% efficiency, lower power consumption and better heat dissipation..
[ Power Supply Protection ] Below functions let PSU works safely: UVP, OVP, overheating protection, OCP and SCP. (When the PSU stops working suddenly, pls wait for 3-5min, then turn on the PSU again, because it is under protection.).

Combining innovative cable management, concentrated airflow, and proven CORSAIR build quality, the 4000D is a fitting choice for an immaculate high-performance PC..
The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables..
Includes two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling. Motherboard will fit in our 4000 Series cases without any issue. Mini-ITX, micro-ATX, ATX, and E-ATX form factor motherboards are all supported..
A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including 360mm in front and 280mm in the roof (dependent on RAM height)..
Put modern connections within easy reach with a front I/O panel including a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack..

Note：input power 11.4V-12.6V,don't too low or highg,or will be damaged！Please read the Product Description before use!.
250 Watt Pico PSU ATX High Mini-ITX Power Supply with adapter board.
Pico power supply Short-circuit protection: output shut down when short-circuit.
DC input connector: 2.5mm inner diameters, 5.5mm outer diameter.
The atx power supply with 24 pin ATX connector, Plugs directly into the ATX connector.
Perfect DC PSU for mini ITX Motherboards.

Meshed front panel for increased intake of ambient cool air.
Supports Mini-ITX motherboards for small profile builds.
Unique HDD/SSD mounting bracket positioning allows more space inside.
Supports 120 mm water cooling kit at the front of the case.
Supports 120 mm water cooling kit at the front of the case thanks to HDD/SSD mounting style.
Supports standard ATX PS2 sized power supplies.

Compact Mini ITX A highly compact layout efficiently uses space to keep dimensions minimized.
Fine Mesh Ventilation The entire front panel and part of the top panel features fine mesh, achieving efficient airflow while also filtering out dust.
200mm RGB Fan Even with compact dimensions, the H Series’ iconic 200mm RGB fan is included for optimal cooling.
ATX Power Supply Full sized ATX power supplies are supported to improve hardware compatibility and ensure efficient power to the system.
Built In Handle A handle is built into the top panel for added portability and on the go gaming.

Double curved tempered glass panel, IMAX borderless field of view, graphics card can be seen on three sides..
Designed for MINI ITX graphic card, MAX GPU length is 200mm..
Supports Mini ITX motherboard, SFX PSU and 240mm radiator..
High efficiency cooling design, 2 x 120mm reverse cooling fan which installed in bottom of the case, 240mm water cooling supported on the rear and special power supply cooling holes..
Great cable management, hidden cables design on the top, magnetic washable dust-proof net..

Supports Mini ITX, Micro VAX, ATX, E ATX Motherboard.
Designed for high end gaming system compatibility.
5 millimeter thick tempered glass window with Stunning Viewing. PSU: Standard PS2 PSU (optional).
Eliminates the issue with “GPU SAG”. Vertical mounting of multi GPU configurations on an E ATX platform.

Supports M ATX and Mini ITX Form Factor Motherboards. Motherboards 6.7” x 6.7” (Mini ITX) , 9.6” x 9.6” (Micro ATX).
Designed for use in either a vertical or horizontal orientation on the motherboard.
Chamber concept design with optimized cable management space for small form factor builds.
Stackable and flexible thermal solution. Remarkable expansion. Advance ventilation.
2x USB 3.0, 1x Headphone, 1x Mic Front Ports, Internal Bay: 3x 3.5 inches or 2.5 inches.