Cooler Master MasterCase H500P Mesh Computer Case High Air Flow Mesh Front, RGB LED, Tempered Glass MCM-H500P-MGNN-S10
DUAL 200MM RGB FANS - Two massive 200mm MF200R RGB fans draw high-volume airflow into the case for superior cooling (includes an additional black 140mm fan at the back).
BUILDER FOCUSED - A DIY or case modding dream the front mesh intake panel transparent top exhaust panel and both side panels can be easily taken off - perfect for creative people looking to personalise their PC.
TEMPERED GLASS SIDE PANEL - The easy-to-remove light-grey tinted side panel combined with minimalist CPU cut out cover PSU shroud and clean cable management covers with dedicated routing creates a minimalist frame in which to showcase the hardware inside Supports E-ATX ATX Micro-ATX and Mini-ITX motherboards - features 2 additional PCI slots at the rear to better highlight graphics cards.
LIQUID COOLING READY - The H500P accommodates liquid coolers with radiators up to 360mm in length either within the top panel or behind the front mesh.
ACCESSIBLE I/O PANEL - Features 2 x USB 3 2 (formerly USB 3 0) ports 2 x USB 2 0 ports 1 x 3 5mm audio jack 1 x 3 5mm mic jack ARGB Controller and 1 x 2-to-3 ARGB Splitter.
OMNI-DIRECTIONAL WIFI ANTENNA- This 8dBi omni-directional is with 2.4GHz and 5.8GHz dual band, high gain and can extend wireless range to dead spot.
PIGTAIL SPECIFICATIONS- Connector type: IPEX MHF4 to RP-SMA Female,Length: 15cm/5.9”.
STABLE SIGNAL TRANSFER- The WIFI antenna is used high quality circuit board which ensures maximum and stable signal quality. Easy to install and increase signal strength.
WORK WITH- This wireless antenna works with most wireless devices, such as Mini PCIe Wireless Card Routers / Repeater / Range Extender / Desktop PC / Mini ITX Build / PCI Card / FPV UAV Drone / PS4 Build. WARM NOTICE: this wireless router antenna only use for MINI PCI-E Interface, Do Not Use for M.2 (NGFF) Interface, please check your connectors before purchasing.
DIYPC ARGB-Q8-BK Black USB 3.0 Steel / Tempered Glass Micro-ATX Mid Tower Computer Case, 1x 120mm ARGB Fan x Rear (Pre-Installed)
Optimized Cooling Performance – Hairline pattern front and side mesh design along with 120mm rear fan provides optimal air circulation. Total of 4 fans can be installed, including on the side panel..
Powder Coated Steel – The T6’s chassis is made of high strength steel sheets to withstand high pressure and heat. The black powder coating applied throughout the chassis is corrosion resistant..
Versatile Layout – T6’s internal layout design provides great workspace for building various types of PC whether for a home workstation, office, or gaming. Will fit ATX, mATX, and mini-ITX motherboards..
Bays and Ports: (2) 2.5” and (2) 3.5/2.5" drives, external bay for a 5.25" drive, I/O port with 1x USB 3.0, 2x USB 2.0, 1x Audio In, 1x Audio Out.
Caution: this case will not fit ATX motherboards with side-facing SATA ports..
DUAL SYSTEM CAPABLE: Designed to accommodate (2) completely separate systems/motherboards/power supplies/VGA cards/ main component in a Back-to-Back configuration.
FULLY MODULAR/ DISMANTLE DESIGN: Provides multiple configurations and flexibility for PC Enthusiasts with a fully breakdown construction design.
DUAL MOTHERBOARD & I/O PANELS SUPPORT: Covering a wide range from Mini ITX to XL-ATX motherboards/ (2) 4x USB 3.0 with HD Audio ports for convenient front panel access for each system.
LARGE ARYLIC WINDOW: Equipped with a Large, 3/16" thick acrylic window improving overall structure support and crystal clear viewing.
EXTREME WATER COOLING SYSTEM: Support up to 2x 600mm radiator applications with various cooling configurations for full custom liquid cooling builds.
Aluminum MATX-Case Desktop PC-Case Tower-Chassis - Supporting ATX&SFX/SFX-L Power Supply/MATX& DTX&ITX Motherboard/360/240/120 Water Cooling& Air Cooling…
【Small volume&large capacity】 With much Smaller Size compared with traditional Micro PC case but with big capacity and more hardware compatibility functions for personal computer home using, students &gamers.
【Outstanding side Panel design】 Aluminum side panel seamless connected with half part of transparent tempered glass design makes the micro atx case standing out in many micro computer cases.
【Unique installation design】 Support ATX&SFX/SFX-L power supply and support graphic cards with vertical installing(Charming lights can be seem) and side lying installing which attracts countless gaming case ITX, ATX &MATX gaming pc case lovers.
【Exquisite workmanship】 All edage parts of the case is CNC polished by hand with exquisite workmanship. The hidden screw installation method makes the side panel smooth and exquisite, and allows ATX/mATX case fans to install the case tools free.
【High efficent heat dissipation】 Can be installed with air cooling & 360/240/120 water cooling, making the heat dissipation performance much higher than ordinary Mid Tower ATX Case.
Zalman T6 ATX Mid Tower Computer PC Case Pre-Installed 120mm Fan 5.25 ODD USB 3.0 Patterned Mesh Design mATX ITX for Gaming Workstation Black
Optimized Cooling Performance – Hairline pattern front and side mesh design along with 120mm rear fan provides optimal air circulation. Total of 4 fans can be installed, including on the side panel..
Powder Coated Steel – The T6’s chassis is made of high strength steel sheets to withstand high pressure and heat. The black powder coating applied throughout the chassis is corrosion resistant..
Versatile Layout – T6’s internal layout design provides great workspace for building various types of PC whether for a home workstation, office, or gaming. Will fit ATX, mATX, and mini-ITX motherboards..
Bays and Ports: (2) 2.5” and (2) 3.5/2.5" drives, external bay for a 5.25" drive, I/O port with 1x USB 3.0, 2x USB 2.0, 1x Audio In, 1x Audio Out.
Caution: this case will not fit ATX motherboards with side-facing SATA ports..
2 x 8dBi 2.4GHz 5GHz 5.8GHz Dual Band WiFi RP-SMA Male Antenna+2 x 35CM U.FL/IPEX to RP SMA Female Pigtail Cable for Mini PCIe Card Wireless Routers PC Repeater Desktop FPV UAV Drone PS4 Build
High gain WIFI antenna- This 8dBi Omni-directional antenna with dual band 2.4GHz / 5.8GHz and RP-SMA Male connector which reduces interference, extend wireless range to dead spot.
Pigtail Specifications- Coming with 2 pieces connector cables,Length: 35cm including the connectors.
Connector type: U.fl / IPEX (MHF2) to RP-SMA Female.
High quality- The WIFI antenna case is made of hard plastic, sturdy and durable. The internal is using high quality circuit board ensures maximum and stable signal quality.
Multi-use- This wireless antenna works with most wireless devices, such as Mini PCIe Wireless Card Routers / Repeater / Range Extender / Desktop PC / Mini ITX Build / PCI Card / FPV UAV Drone / PS4 Build. WARM NOTICE: this wireless router antenna only use for MINI PCI-E Interface, Do Not Use for M.2 (NGFF) Interface, please check your connectors before buying.
Easy to install- This wireless wifi antenna is easy to install, Simply replace current antenna to increase signal strength.
The Tower 100 Mini ITX Chassis is the mini version of our iconic case The Tower 900.
4mm Thick Tempered Glass Window Panels: three 4mm thick tempered glass window panel at front, left, and right.
Handy I/O Port and unique internal design: with a high speed Type-C connector and two USB 3.0..
The Tower 100 supports up to two 3.5’’ HDD or four 2.5’’ SSD, include two bracket for 2.5’’ SSD at right side..
Dust Filter Design: Eight super fine filters on the right, left, top, and at the bottom are designed to provide excellent protection against dirt and dust from the outside of the case and is easily removable for cleaning..
