Muzata 10Set 1/8" Cable Railing Kit Hardware Turnbuckle M5 Eye to Eye CK01 and 165Ft Wire Rope WR01 and CR12 for Wood Post Stainless Steel Angle Adjustable WoodLoft System 10 Cable Lines,CA4 CA5
Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 10pcs M5 eye to eye turnbuckle,20pcs thimbles,20pcs eye straps,20pcs aluminum sleeves,40pcs screws,1pcs cable cutter,330ft wire rope. This set can build 10 cable runs, including tensioners and terminals.
Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
F11S 4K PRO / F11 / F11 Pro Drone Accessories 2pcs Front Landing Gear, 2pcs Front Extended Leg Light Covers and 2pcs Back Landing Gear Blades Motor Cover
Extended Landing Gears are front ones for F11S 4K Pro / F11 / F11 Pro RC Quadcopter..
The motor arm covers are compatible with F11S 4K Pro / F11 / F11 Pro Back Landing Gear..
The light covers are fit for Front Landing Gears.
Packaging Contents: 2pcs front landing gears, 2pcs front landing gear light covers, 2pcs back landing gear motor arm cover..
Well worked F11S 4K Pro / F11 / F11 Pro drone spare part accessories..
Muzata 20Pack 10 30 35 Degree Angle Adjustable Protector Sleeve for Wood Post Stair Railing for 1/8\ Wire Rope Cable Railing T316 Stainless Steel CR68,CP1
Patent Design - With a flexible separation design, Muzata angle protector sleeves fit 1/8" wire rope and are easy to install on stair railing and ramps at 10 30 35 degrees. If you need angles larger than 35°, pls choose CR69(45°Angle Protector Sleeve). Note: these cable railing kits are ONLY for WOOD posts. Package includes: 20packs angle sleeves, 20packs adhesive sleeves, 40pcs adhesives, 1pc drill bit(9/32")..
Protective and Decorative Function - These stainless steel protector sleeves help protecting wood post and stainless steel cable from friction wear. Adding these protective sleeves will make it easier to stretch cable through posts and also beautify the rough edges of the drilled holes to create a clean look. Note: It works for wood posts only, not for metal posts.
Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.【Muzata's Guarantee】: Please feel free to contact us if you find any quality problems after installation. We'll provide you with the most attentive after-sales service.
Pre-Designed System - To help you construct a cable railing system, we pr....
Muzata 4pack Cable Railing Post Square 36\x2\x2\ Stainless Steel Brushed Finishing Pre-Drilled Post Top Mount for Wood Concrete Level Deck PS01 LH4S, PT1 PT2 PT6
Key feature - This square cable railing post (brushed finish) is designed for 36" residential cable railing projects. It is pre-drilled with 10 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. This cable railing post comes with both flat and curved brackets to fit flat and round handrails. Muzata invisible cable railing kit series is recommended to work with this post. Plz search Muzata CV2.
Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater.
Code Compliance - This structural square post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS11 to find slice or rectangular stabilizer posts to get a broader view. It is important to consult local building offices about the rule....
Cable railing kit product of Hong Kong company,it fits for 1/8 inch cable railing system. Made of US AISI standard 316 stainless steel for maximum corrosion resistance, durability and tensile strength.It can be used indoor and outdoor..
This cable railing hardware will make your cable railing more beautiful beacuse no need extra screws to install and no need turnbuckle to tension the cable..
This left & right hand thread design,It will rotate wire rope to the same direction and tighten the cable , Which also resolves the problem of twisting the wire rope (The fig.3 is key step of installation,It will help your installation easier and more beautiful)..
This cable railing kit include 40 pcs left and 40 pcs right thread lag screws ,1 pcs special drill bit ,1 pcs special wrench.
Muzata 4Pack Level drilled Cable Railing Post 42 x2 x2 Post Body 39 Adjustable Top Level Line Post Top Mount Stainless Steel Black Finish Wood Concrete Level Deck PS01 BH4L
Level line post - This square (2"x2") cable railing post (39" height) is designed for building 42" cable railing projects. It is pre-drilled with 12 level line holes. It can work as both structual end posts and middle posts in level sections.
Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, if your project is located near the seaside or humid areas, Muzata aluminum posts PD01/PD02/PW01 are highly recommended for its super strong salt tolerance.
Code compliance - This structural post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add an intermediate post between two structural posts. Search Muzata PS11 to get matched rectangular intermediate posts. Pls consult local building offices about the rules since there might be different requirements in some states.
Related Posts - You might need several post types to build a complete project: search PS01 BH4L for structural line posts, PS11 BH4L for intermediate posts, PS01 BC4L f....
Muzata 10Pairs Cable Railing Kit 1/8 Swage Toggle Turnbuckle Hardware T316 Stainless Steel for Wood Post WoodEasy System Angle 180° Adjustable Stairs Deck 10 Cable Lines CK07 NN1,CA4 CA5…
Multi-Angled and Wide-Adjustment -- This cable railing kit works for 1/8" wire rope in multi-angled stairways as well as horizontal sections. The....
Clean Look and Durability -- This cable railing hardware has a clean looking. It's made of T316 stainless steel, which has excellent resistance to....
Easy to install -- This cable railing kit does not require any pre-drilling and can be simply installed by tightening the screws. The wide adjustable....
Pre-Designed System -- We pre-designed a WoodEasy cable railing system to help you construct a beginner-friendly wood system. It includes 1/8" toggle....
Why Choose Us -- MUZATA has helped millions of families with their cable railing projects during the past years. We believe that home renovation....
Muzata Cable Railing Post Level-drilled Post 36\x2\x2\ Stainless Steel Black Finish Pre-drilled Post Top Mount for Wood Concrete Level Deck Stairs PS01 BH4S, PT1 PT2 PT6
Key feature - This square cable railing post (black finish) is designed for 36" residential cable railing projects. It is pre-drilled with 10 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. This cable railing post comes with both flat and curved brackets to fit flat and round handrails. Muzata invisible cable railing kit series is recommended to work with this post. Plz search Muzata CV2.
Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater.
Code Compliance - This structural square post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS11 to find slice or rectangular stabilizer posts to get a broader view. It is important to consult local building offices about the rules ....
Muzata 20Pack 1/8' Invisible Cable Railing Kit Terminal Toggle Anchor Angle Adjustable T316 Stainless Steel for Metal Post Stair Deck One Post Corner CR07, CV2
Completely Invisible & Multi-angle – Muzata cable railing kit CR07 works for 1/8″ wire rope. It can be easily stuck and completely hidden inside the METAL posts to get a neat appearance. The multi-angle feature enables the toggle anchor terminal to rotate from 0-180 degrees. It works on both level and multi-angle sections without angled washers. Note: this cabler railing kit ONLY works for hollow METAL posts(20mm≥hole size≥10mm ).Package include:20packs terminals.
One-Post Corner & Wall Post Solution – With a well-designed compact body, you could use two invisible toggle anchor terminals CR07 at one corner METAL post of 4”x4” to 10”x10”, and they won’t hit each other. This fitting is also a great solution for posts against the wall or situations that you are unable to get behind to handle. You could use this as a fixed end terminal on the post of one side and use a tensioner Muzata CR26 on the post of another side.
Marine Grade – This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
Pre-Designed System – We pre-designed a BlackCool cable railing system to help you get a fully customized project, in....
