Best Mining Drill Rig

Electric Drill Press Stand Tool Universal Bench Drill Press Stand Clamp for Hand Drill Machine Workstation Repair Tool

  • 【Composition】handle, quick button, screw, scale, fixed groove, non-slip jaw Press the yellow button: simultaneously pull the handle to the right (open) or push the handle to the left (lock)..
  • 【Adjustable Bracket】Bracket height fixing sleeve, which can be adjusted according to working height and drill length..
  • 【Plug-in Rig】This plug-in rig is ideal for keeping the drill bit stable and more accurate than hand-held operation during use..
  • 【Reduce Deviations】Electric drills have higher concentricity and less vibration, which can reduce deviations. With a drilling depth of up to 60 mm, it has a sturdy column, a sturdy base, and a slot for vise..
  • 【Application】This is a new type of adjustable aluminum drill floor, perfect for shops or homes..
Check Stock

MLLIQUEA 8 GPU Mining Rig Frame, 70mm Mining Machine System & Platform, Barebone Motherboard for ETH with 4 Cooling Fans, Miner Frame Case with SSD, RAM (Without PSU/GPU)

  • 8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 70mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. (Please read the NOTE in the Product Description carefully before purchasing!)Two kinds of motherboards are shipped randomly..
  • Upgrade Material - Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Can fully protect your GPU and electronic equipment from damage and saves your use cost. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
  • Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 4 , 6 PIN cable to (6 + 2) Pin * 8pcs, screws ​​package. Compatible with Win10 /iOS, but you'll need to install the system yourself. (Graphics cards longer than 320mm cannot be used.).
  • Safe and Effective - It can be low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum (ETC), and any other cryptocurrency. Note: The hard disk i....
Check Stock

CS Unitec ETN 2001 P Up to 4\ 2-Speed Hand Held/Rig Mounted - Wet/Dry Concrete Core Drill - for Concrete, Brick, Block, and Stone - Made in Germany - 110V

  • Heavy-duty, light-weight hand-held core drill rig with 4" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 15 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 2 speed gear box (0-800/0-1570 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 15 lbs., Collar Diameter 52mm collar for easy mounting, rig mounting kits available..
Check Stock

CS Unitec END 130/3.2-6\ Capacity Concrete Core Drill - Wet Diamond Core Drill - 3-Speed For Concrete, Brick, Block, and Stone - MADE IN GERMANY - 110V (END 130/3.1 PO)

  • Heavy-duty, light-weight hand-held core drill rig with 6" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 15 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (600/1300/2800 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 16 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available..
Check Stock

PCI Slot Fan Dual 90mm 92mm GPU Cooler Graphic Card Fans for Video Card VGA Cooler Compatible with DIY Mining Rig Set Up GTX960 Nvidia k80 RX580 590 RTX 2060 2070 2080 EVGA 2080ti 1050ti AMD R9 280

  • ❤UNIVERSAL GPU COOLER: GPU video card cooler fans 2 x 92mm mining rig fans designed for most universal graphic card video card VGA cooling,can compatible with LSI MegaRaid HBA SAS 9361-8i card Optiplex 9020mt The 1050ti GPU FurMark GPU MSI Vega 56 Air Boost RTX2070 AMD R9 280 ASRock Taichi x399 RTX 2060 rx 580 RTX 2060 ASUS TUF rtx2080 graphic card cooler mining rig frame.just please check the size to make sure your pc has enough space..
  • ❤5V 7V 12V VOLTAGE: 1x Power D-type interface cable ,four interface with 5V 7V 12V voltage sticker,choose different voltage to get airflow: 38CFM ,56CFM ,95CFM and different noise level..
  • ❤FAN SPLITTER CABLE:1x 4Pin fan splitter cable,you can combine 3x92mm fans into one interface to be connected with voltage cable.ignore it,Each fan can be worked independently,easy operation and replacement..
  • ❤PACKAGE INCLUDED: 2x92mm fans(PCI bracket screwed), 1x multi-voltage cable ,1x fan splitter cable..
  • ❤100% 90 DAY MONEY BACK : If you are not satisfied for any reason, simply return your product for a full refund, no questions asked. You have nothin....
Check Stock

Happybuy Diamond Core Drill, 2180W 7\/180 mm, 1600RPM Variable Speed Core Drill Rig with Portable Case, Handheld Drilling Machine for Hard Stone, Concrete, Marble, Granite, Brick

  • 7 inch Max Drilling Diameter: 2180W powerful motor of the handheld core drill rig is designed for wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors, and more. With a 7"/180mm max drilling diameter and 1600RPM stepless speed, you can drill with less effort..
  • Durable Steel Output Shaft & Copper Inlet: As the machine will work upside down, water will unavoidably flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Over-current Protection: We also provide an overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Comfortable Shoulder Rest & Handle: The upgraded shoulder rest is designed to save your energy. The slip-proof rubber handle greatly enhances friction and reduces vibration to completely control the hammer with comfort. Besides, tools are well stored and sorted in a compact case..
  • Wide Range of Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair ra....
Check Stock

Drill Drills Drilling Electric Electric Drill Power Tool Power Drill Drilling Brick Brick Loud Motor Grind Grinding Sound Effects Sound Effect Sounds EFX Sfx FX Tools Power Tools - Drills [Clean]

  • Heavy-duty, light-weight hand-held core drill rig with 6" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 15 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (600/1300/2800 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 16 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available..
Check Stock

ATX 1600W Full Modular Mining Power Supply GPU for Bitcoin Miner ETH Rig Supports 6 Graphics 80+ Gold Certified with 150CM US Plug Adapter Cable(110V)

  • This power supply is special for mining machine, in order to effectively dissipate heat, the fan speed is above 6000 RPM, so the noise is normal, if forced to choose to use in PC,there is no way to avoid this noise, PC power fan used within 2000 RPM..
  • This is a power supply specially designed for the US 110V.The modular mining power supply can be a perfect tool for your Eth Coin rig.Rated power is 1600w. DC circuit design, stable voltage output..
  • 80 PLUS Gold Certified PSU 150mm cooling Fan and Auto Fan Speed Control.150mm large fan design for optimal system cooling and maximizing performance.Compatible with quality, efficiency and stability balance, pursuing continuous real power output..
  • 1x IDE.It's better for Bitcoin GPU mining,100% Brand New and High quality - GPU:Support Up to 6 GPU(GPU is not included).
  • Using a new large-capacity large magnetic ring material, the performance is very stable. Widely used in variety of mines and high-power single 12V industrial equipment..
Check Stock

CS Unitec ETN 162/3 P - 6-3/8" Capacity Concrete Core Drill - Wet/Dry Diamond Core Drill - 3-Speed For Concrete, Brick, Block, and Stone - MADE IN GERMANY - 110V

  • Heavy-duty, light-weight hand-held core drill rig with 6-3/8" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 19.5 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (0-510/0-1150/0-2500 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 15 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available. Easy Changeover for wet / dry drilling with integrated connections..
Check Stock

C.S. Unitec EBM 352/3 PSA – 14 in. Capacity Concrete Core Drilling Rig with Anchor Stand – Wet Diamond Core Drill – 3-Speed for Concrete, Brick, Block, Asphalt, and Stone – Made in Germany – 110V

  • Heavy-duty, light-weight core drill rig with anchor stand – 14 in. diameter hole capacity – MADE IN GERMANY.
  • Powerful 20 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (230/500/1030 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Only 77 lbs. (Rig & Motor) – Universal Tool Holder / Motor Slide Mount Allows for Easy Separate Mounting of Core Drill Anchor Stand from Drill Motor to Reduce User Fatique and Improve Hole Alignment (Motor Weight = 27.5lbs).
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
Check Stock