Best Mining Drilling Equipment

Mountain Goat Trommel + Desert Fox (w/ Speed Control) Combo Kit

  • ...each rotation of the wheel (105 times per minute). These 7 spirals dump gold into the tube-shaft and into a hanging gold catch-cup. Can run 70 pounds of concentrates in an hour -- both a separator and a concentrator in one self-contained panning machine..
  • Ideal gold mining equipment for the desert - designed to conserve water and will operate on just 3 gallons..
  • Desert Fox: 20" x 14.5" wide x 20" high. 10 lbs. Action Packer Storage Container Size: 20 x 16 x 12 inches. Stowed Dimensions: 10 inches high x 14.5 inches wide x 17.5 inches long - Mt Goat Trommel: Length: 32" with hopper installed, Width: 16" at bottom, Height: 24" with adjuster legs, Water Requirement: 5 gallons, Capacity: 2 yards per day.
Check Stock

6 Pack PCI-E Riser GPU Risers Card 10 Capacitors,16x to 1x Pcie Express Powered Adapter Card for Bitcoin Litecoin ETH Coin Mining with RGB Colorful LED Light & 60cm USB 3.0 Extension Cable

  • ...rn off the light according to your preference..
  • ✅ 【Upgraded 10 Solid Capacitors】 This high quality pcie to gpu adapter is equipped 10 capacitors make sure the graphics card power supply more stable and safer, protect your GPU and investment. It is the latest and most advanced solution for setting up GPU mining equipment on the market..
  • ✅ 【Stable Input Interfaces】 Our gpu risers have 3 groups of power input Interfaces ( 6 PIN+4PIN Molex +SATA15 Pin) to reduce the burden on the connection between the motherboard and graphics cards. The Gold-plated contact ensures perfect connectivity and extend service life and provide faster data transmission speed..
  • ✅【WIDELY APPLICABLE】 Our pcie to gpu adapter with a fixed buckle that make sure the graphics card will not fall off from the slot. It is compatible with 1x, 4x, 8x, 16x PCI-E slots, suitable for all Window, LINUX and MAC systems. Plug and play, no driver needed to install. —–Bonus: 6 * Pci Riser, 6 * PCI-E 1X Adapter Card, 6*24 in USB 3.0 cables ( 90 days warranty).
Check Stock

BEMONOC 2Pcs/Pack HTD 5M Rubber Timing Belts Closed-Loop 400mm Length 80 Teeth 15mm Width Industrial Timing Belt

  • Fiberglass Tensile Cord - High dimensional stability and maximum flexibility engineered and tested for highly wear resistant performance.
  • Nylon Tooth Cover - Durability and wear resistance, increased power capacity.
  • Timing belt efficient transmission, low noise, oil resistance, fatigue, inflexible, non-stretch, high precision, wear-resistant.
  • The belts are widely used in automotive, textile, machine tools, office machinery, power tools, household appliances, instrumentation equipment, packaging equipment machinery, mining, petroleum, chemical and so on..
Check Stock

Block Create Unlimited Miner - Purple Edition | Crypto Miner | Play to Earn | Passive Income | Algorand Blockchain | Metaverse

  • Litecoin Miner: L3+ is a dual-coin merged miner of Litecoin & Dogecoin. Has high computing power and efficiency: 504 MH/s (expected to fluctuate +/- 5%), Power consumption 800W+10%. Dimensions 8.66 x 18.11 x 11.02 inches.
  • Durable: This Scrypt Litecoin Miner has a built-in controller, and no separate host is required for operation. The chassis is made of premium aluminum alloy material, which is integrated and durable. With dual fans and independent heat sinks, the heat dissipation effect is good.
  • Stable: This LTC Dogecoin Mining Machine has a tight industrial power interface, which can be closely contacted and fitted to ensure long-term and stable output of power.
  • Note: The power consumption efficiency of the Scrypt ASIC Litecoin Miner will vary depending on the PSU, ambient operating temperature and the accuracy of the power meter. Please be careful to avoid dust and catkins, so that the heat of the ASIC Miner cannot be dissipated.
  • Equipment Condition: Our L3+ Litecoin Mining Machine is in good condition, dust free, used but like new. We will wipe, clean and debug them before shipping to make sure they work properly. If you encounter any problems, please contact our team in time.
Check Stock

Blue Orchards Mining Fun Deluxe Party Packs for 16 Guests! Mining Birthday Party Decorations Gamer Birthday Decorations for Boys Construction Theme Birthday Party Pixel Gaming Party Decorations

  • [EVERYTHING YOU NEED] Our exciting Mining Fun Deluxe Party Pack has all the party basics you’ll need to complement your little one's pixel mining....
  • [FOR 16 GUESTS]This Mining Fun Deluxe Party Pack includes 16 9-inch paper dinner plates, 16 7-inch paper dessert plates, 20 paper lunch napkins, 16....
  • [PARENTS LOVE] Parents will love having everything for their little one’s mining celebration all together in one easy mining package! Craft your way....
  • [MAKE MEMORIES] Grab your Mining party favors and make lasting memories and breathe easy with this adorable, all-inclusive party pack picked....
  • [HAVE FUN] Bring your pickaxes and let your guests enjoy these Mining inspired party decorations when you decorate your big day with our amazing....
Check Stock

SUOHUI Complete GPU Mining Rig for Ethereum Classic ETC/ETH/RVN/Flux/Rego with 8 GPU Mining Motherboard,PSU,RAM, SSD, Open Frame Mining Machanie(ExcludingGPU/1 Layer Miner)

  • 【Preinstalled Mining hardware】Miner comes with a mining motherboard, PSU, cooling fans, 128GB SSD, 8GB RAM, CPU, and Win10 OS(not activated). Our mining rig has a complete installation that all components have passed the inspection of technicians and assembled before sending out, which can reduce the defective rate of electronic components and improve the product quality. Easy start in minutes! Note: NOT include GPUs..
  • 【Professional Mining Power Supply】 1800W full voltage power supply allows to mine at home easily. The 10 customized long-line power cables directly power mobo and each graphics card without an adapter cable, avoiding burning the card due to poor contact, providing the best security for your mining..
  • 【4*4500 RPM Silent Cooling Fans】The mining machine has 4 powerful GPU cooling fans with a fan speed controller. Controllable win speed allows accelerating airflow flexibility for optimal cooling. Equipped with the bottom plate to prevent turbulent airflow and achieve excellent efficient heat dissipation..
  • 【Stackable Open-air Mining Frame】: This mining frame is made of high-quality material, reinforcing the mobo with14 screws to protect it from being over shaped. The open-air frame ensures that the graphics card is not limited i....
Check Stock

QWORK 3/8\-16 UNC Stainless Steel 316 Eye Bolt, 4 Pack 3/8\ x 1-1/4\ Marine Grade Machinery Shoulder Eyebolts

  • High quality material: Use high-quality stainless steel 316. Durable and rust-proof..
  • Easy to install: The surface of the eyebolt is smooth, and the precision machining thread makes it very easy to install..
  • Features: The eye bolts play a role of linking and fixing, and can be used for lifting in cable tie binding equipment to reduce the trouble of bundling ropes..
  • Application: Widely used in shipbuilding, petrochemical, port, electric power, mining, railway, automobile manufacturing, airport construction, bridge, large transportation, marine rescue and other important industries and infrastructure equipment..
  • 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month..
Check Stock

Insty Bit Quick Change Drilling Systems Drill Adapter Set With Out Bit (4 Piece)

  • This MT4 shank drill tool is made of steel material, which is durable, anti-oxidation and anti-rust..
  • Suitable for magnetic drills, radial drills, bench drills, lathes, vertical drills and drilling equipment..
  • This morse taper drill sleeve is simple to operate, easy to use, and quick to punch..
  • The morse taper is stable at work and has good performance during use, suitable for professionals..
  • When drilling, external cooling is required (you can use an external cold water nozzle or a cola pot for watering, the equipment without a kettle is preferred)..
Check Stock

Mobil Mobilcut 100 Aqueous Metal Working Fluids [5 Gal. Pail]

  • ... welding, boosts machine finishing, prevents metal seizures & pitting, but it also provides the cleanest cuts on the market!.
  • Multi-Purpose Solution: Also known as a Cutting Fluid, our propriety formula improves the performance and Extends the Life of your drilling & cutting tools as well as power drills & machining equipment. Evo Dyne’s Cutting fluids provides the tack needed for hand drilling and thread cutting making for a safer working environment.
  • Improved Performance: Our aluminium cutting fluid for metal drilling reduces heat and damage caused by friction & also makes mechanical processing of metals easier. With the finest thread cutting oil on the market, you can ensure a high-quality finish of your work while prolonging the life of your equipment.
  • Cutting Oil Made Easy: For the best outcome, apply the Cutting Oil between the cutting tool and workpiece as needed through the duration of work. Maximize your speed and feed time with our simple to use threading oil. This metal cutting fluid is safe for all cutting operations that require a high level of tolerance, precision, fit, & finish. Reapply as needed to maintain your tools' performance at their best.
  • Customer Satisfaction: Based on the trust of our high quality, Tapping Fluid is guaranteed b....
Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

  • 【Built in 1800W Power Supply】The mining machine system comes with 1800W (176V-260V) professional Low Decibel mining machine power supply (It will not work under 110V household voltage), the decibel is about 50dB, suitable for home use. Up to 90% power conversion efficiency, allowing you to enjoy mining and save your power consumption at the same time..
  • 【8 GPU slots】8 GPU slots in the mining rig frame case, and the 65mm gap between GPU ports makes it quieter and easier to cool. The mining case support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPU simultaneously. But It is recommended to run only 4 PCS 3080,3090. Note: GPU longer than 32 cm in length are unavailable..
  • 【8 Adjustable Speed Fans】The mining computer case is equipped with 8 PCS cooling fans.The design of one air volume in and one out, the air volume is sufficient and silent enjoyment, escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
  • 【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to ....
Check Stock