Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc
If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs..
The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used..
To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head..
The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8....
The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby and Right Side Dubby Sleds are Included)
THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles on your mitered projects with the Dubby Sled. The Dubby will allow you to make perfect cuts the first time you do them and keep your creative juices flowing with idea after idea. It is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
WORKING WITH SMALL PIECES- No miter gauge on the market can offer yo....
Miter Saw, SMADRON 12inch Double-Bevel Sliding Compound Glide Miter Saw, Chop Saw with Laser marker, 15Amp Motor, 40T Blade for Wood Cut
【Compound Miter Saw with Powerful Motor】The 15-amp/1800W with 3800rpm motor delivers high power to smooth and fast cutting on carpentry work. And the 12-inch blade comes with sharp 40 teeth makes easy work of cutting and bevel cut. An ideal tool for fine woodworking, carpentry, general construction, and more..
【Double Bevel Saw】The double bevel design enables the saw to bevel around 0-45 degrees and the miter angle be in a range of -45-0-45 degrees, that can meet different bevel cutting needs. The cut capacity up to 4.13x13.19 inches at 90 degree and 2.36x13.19 inches at 45 degree, offers more possibilities for your work than a single-beveled miter saw..
【User-Friendly Design】With 2 extendable side pieces, the miter saw offer a larger work table to meet your requirement of large pieces cuts, and the clamping device system helps for better material support to secure work piece. An efficient dust bag is equipped to collect more than 70% of the dust produced, keeping your work environment clean and tidy..
【Precision & Safety】Adjustable miter scale with precise stops (-45°/-30°/-22.5°/-15°/0°/+15°/+22.5°/+30°/+45°) ensures clean and accurate bevel cuts. Built-in visible laser indicator for increased cutting accuracy and predictable ....
Gunpla 4-1/2-inch 40 Tooth Alloy Steel TCT General Purpose Hard & Soft Wood Cutting Saw Blade with 7/8-inch Arbor(Reduce Ring 5/8 inch)
DURABLE MATERIAL: Gunpla circular saw blades are made of durable premium alloy steel material, with hardened and sharper tungsten carbide teeth for effective woodworking..
HIGH SPEED CUTTING SAW: Experience great cutting performance with this wood cutter. The saw blades ensure fast and accurate cutting with impressive results..
SMOOTH CUTTING: Sharp saw blade cutters, with thin kerf to provide smooth cuts. The saw blades can be used with Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, and more..
APPLICATION: Perfect choice for a circular saw, miter saw, table saw when one is needed for ripping and crosscutting. MAX RPM up to 13,200..
Arbor size:7/8inch(22.23mm) with reduce ring 5/8inch(16mm).
Carbide Teeth: 40. Computer-balanced plate reduces vibration for improved accuracy and better finish..
POWERTEC 71703 Table Saw Sled and Blade Guard Kit w/T-Track, Miter Bars, Crosscut Bladerunner, Flip Stop, Bolt and Screws Set
INCLUDES: 24” universal t track, 19” HDPE miter bars, 3” flip stop, blade guard, flat head wood screws, hex head bolts and nuts.
FUNCTION: Provides you with an easy DIY kit that includes a t-track for mounting flip stops and fixtures, a premium 3” flip stop, blade guard and hardware needed to cut boards to precise lengths while preventing measuring and cutting errors.
100% SAFE: Makes crosscutting safer, more efficient and convenient, while avoiding risking your limb when crosscutting smaller pieces with a crosscut sled specifically calibrated with your table saw.
PREMIUM QUALITY: The t-track included in this kit is made of solid extruded aluminum and the miter bars are crafted with high durability, high stability HDPE (high density polyethylene).
DIMENSIONS: Universal T-Track (24" long) | High Density Polyethylene bars 19" long x 3/4" x 3/8" | 3" Flip stop | Flat Head Wood Screws #6 x 1/2" | 1/4"-20 x 1/2" hex bolts | 1/4"-20 acorn hex nuts.
Gunpla 3 Pieces 4-1/2-inch 40 Tooth Alloy Steel TCT General Purpose Hard & Soft Wood Cutting Saw Blade with 7/8-inch Arbor(Reduce Ring 5/8 inch)
DURABLE MATERIAL: Gunpla circular saw blades are made of durable premium alloy steel material, with hardened and sharper tungsten carbide teeth for effective woodworking..
HIGH SPEED CUTTING SAW: Experience great cutting performance with this wood cutter. The saw blades ensure fast and accurate cutting with impressive results..
SMOOTH CUTTING: Sharp saw blade cutters, with thin kerf to provide smooth cuts. The saw blades can be used with Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, and more..
APPLICATION: Perfect choice for a circular saw, miter saw, table saw when one is needed for ripping and crosscutting. MAX RPM up to 13,200..
Arbor size:7/8inch(22.23mm) with reduce ring 5/8inch(16mm).
Carbide Teeth: 40. Computer-balanced plate reduces vibration for improved accuracy and better finish..
Miter Bar Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Wood Working Tool Durable In Use for Jigs Fixtures Sleds Router Tables and General Woodworking
Sliding Action Tool: Our miter bar rail includes plans for a wide variety of shop-made jigs and fixtures. Adjustable stainless steel runner for....
Convenient for Using: Adjusts for perfect sliding action in any standard miter gauge slot with just a twist of the wrist. Locks securely in any....
Application: For building various jigs on your table saw, like miter sleds. Includes threaded mounting holes and hardware for easy attachment to any....
Durable: Our miter slider Made of high quality aluminium alloy, it is of strong strength and reliable durability for several year using without....
Premium Quality: This is a miter bar usually used in table saw woodworking works.
Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences
This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction.
Pre-load tension design maintains consistent pressure across face of the feather board.
5/8" And 3/4" Metal miter bars fit all standard miter slots.
Dual Slide Motion-side to side and forward action for quick and easy setup.
All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences.
Split rail miter bar construction-provides maximum hold.
Ergonomic knobs help prevent over-tightening and provides non-slip loosening.
All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences.
Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back.
POWERTEC 71156 Aluminum T-Track 48 Inch Combo with Aluminum Miter T-Bar
FUNCTION: The POWERTEC Miter track and bar set is designed to help build an assortment of sliding jigs and fixtures, while enhancing overall bench top table tool precision and functionality. They can be used together or separately, the miter track works with standard ¾” x3/8” miter bars and the T-bar fits standard ¾” x3/8” t-slotted miter slots..
APPLICATIONS: Ideal for benchtop table saws, router tables, band saws, and other woodworking shop projects that require a versatile set of miter track channels.
DESIGN: Both anodized aluminum extrusions possess a heavy duty construction, and feature a center guide track perfect for drilling and project alignment - The miter t-bar slides seamlessly into the miter track or t-slot.
SIZE SPECIFICATIONS: T-track works with ¾” x 3/8” miter gauges, with or without t-slot plate.
t- bars fit perfectly into t-slotted miter gauge slots - The 48" length can be custom cut to suit your individual project requirements.
