Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results.
High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right.
Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts.
Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.
MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
Fulton Spring Clamp Pliers with 13 Spring Clamps and Hip Clip Made in the USA
If you have ever attempted to firmly secure and clamp mitered corners then you know what kind of a challenge it can be to say the least. You could always try those large, cumbersome and very expensive parallel clamps to try and work each corner just right to hold your mitered corners together. That too can be extremely challenging and not to mention very costly..
The Fulton Miter Spring Clamps are the ideal and cost effective way to quickly and easily clamp mitered corners without all of the hassle you typically have with other clamps. The Spring Miter Clamps are made from a high strength steel. The clamps can be applied using your hand to squeeze the clamp to open the sharp, pointed tips or you can use the Miter Spring Pliers to make it super easy to to spread the tips apart..
Once you have the clamp tips spread apart, simply place the spring clamp onto the mitered corner you need to secure, then release the clamp so the tips pierce into the wood and keep your stock in place. Depending on the size of your project, you may need to use more than one spring clamp on each corner to hold your stock in place..
Unlike other available spring clamps, the Fulton Miter Spring Clamps don’t cut into your stock piece. The uniquely designed tips are designed to pie....
MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Anodized Aluminum Miter T Track w/T-Bar Rail for Jigs Fixtures Sleds Router Tables and General Woodworking 32 inch MADE IN THE USA
When building sleds or fixtures, workshop tables, router table tops or any type of jig or fixture that helps hold stock in place or helps feeding stock through a cutter, miter t track will help make it so much easier. Miter T Track does this by allowing devices like miter gauges to effortlessly slide through the track for cutting applications and it can also accept fixtures with the proper hardware like featherboards to keep your stock firmly against a fence..
The Miter T Track has a “T” shape to it so that it can accept the discs on the ends of many miter gauges. This essentially means that your ¾” x 3/8” bar on your miter gauge will fit neatly into this track even with the disc on the end. Of course you don’t have to have a bar with the disc on the end. Wether you’re making a table top for your router, your band saw or simply building a sled, a standard ¾” x 3/8” thick bar will do the trick!.
The “T” shape on the Miter Track also accepts the T-bar. The T-bar has been designed to fit neatly into the miter track profile for use with jigs, fixtures or sleds. The T-bar is made from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards wher....
DEWALT FLEXVOLT 60V MAX* Circular Saw for Framing, 7-1/4-Inch, Tool Only (DCS577B)
A BETTER WAY TO MEASURE - The M1 Caliber is a fully integrated, patent-pending, measuring tool that clamps to almost any kind of saw fence and outputs measurements of materials slid underneath its wheel on a large, backlit, LCD screen..
DIGITIZE YOUR MITER SAW - Using modern technology with a focus on functionality, measure and cut stock materials up to 3 times faster than conventional methods and measuring tools. The M1 Caliber eliminates the need for a tape measure and pencil..
COMPATIBILITY - Displays both English and Metric measurements and is compatible with most miter, cut-off, chop and vertical band saws. Make miter, bevel, compound, and straight cuts on a variety of materials ranging from boards to composites to pipe..
INCREASED SAFETY - Whether cutting dimensional lumber to frame out a home, cutting composite planks for decking or putting the finish touches on an interior job, the M1 centralizes measurement related activity to a single location..
QUICK AND EASY SETUP - Clamp to your saw fence, release the arm, input your blade thickness and begin to cut. Perfect for professionals, contractors, woodworkers and other tradespeople. The M1 will provide the most accurate read on smooth materials..