STARTO SQ15001 oscilloscope is an assembled finished machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time..
The sensitivity has been extended in both directions in width and height, which is wider and higher than others. It reaches 5mV/div -- 20V/div, while others is only 10mV / div - 5v / div..
It has been added the rotary encoder, makes parameter adjustment more quicker and easier.
For this updated digital oscilloscope, includes a 9V power adapter, so you can use it by plug it in directly, so convenience that you don't need to place another order for the power adapter..
Detailed Operation instructions, troubleshooting guide and schematic are also provided..
AUKUYEE Updated 2.4″ TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 (Assembled Finished Machine)
Digital DIY oscilloscope uses ARM Cortex-M3 processor and contains a 2.4-inch color TFT display, which can be used as an ARM development test board..
Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
Can make a tailor-made software development on the basis of this kit, which can be can be changed to millivoltmeter, data recorder, etc..
The variety of components is suitable for students to understand the oscilloscope structure and principles, and do in-line component welding, and chip component welding training..
The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..
Hand-held dual channel oscilloscope, and recorder.
Connect-and-View & IntellaSet Auto reading Technology for simplicity and hands-off operation.IntellaSet technology automatically and intelligently adjusts numerical readout based on the measured signal.
Oscilloscope Multimeter 2-in-1, Color Screen Intelligent Graphical Handheld Oscilloscope Multimeter 1MHz Bandwidth, 2.5Msps Sampling Rate, DC/AC Voltage/Current Test
... convenient for detecting and debugging..
Meter mode: 4 1/2 digits of the true effective value. 1. Standard voltage, current, resistance, diode, continuity, capacitance test. 2. Auto range function, convenient for testing and debugging. 3. The maximum input voltage is AC 750V, DC 1000V. 4. Independent multimeter and oscilloscope input. 5. Reading the wait function. 6. Relative measurement function..
USB Type-C interface supports not only power bank power supply, but also adapter charging and top computer connection. After connecting to the computer, the computer can recognize the oscilloscope as a USB flash drive and read saved images or CSV waveforms, which is useful for later viewing and analyzing waveforms or for sharing waveform data..
Save function: can save 4 groups of settings, 4 groups of reference waveforms, 4 images, 4 groups of waveforms in CSV format. The reference waveform can be displayed on the same screen as the measured waveform for convenient comparison of the waveform. Self-calibration function. Up to 6 automatic measurements can be displayed simultaneously on the screen..
UNI-T UTG962 + UTD2152CEX, Function Generator and Oscilloscope Kit
MSO3000E not only has 4 analog channels, but also provides 16 digital channels to accurately capture and display digital level signals and bus logic status.
Built-in dual-channel 50MHz arbitrary waveform generator function, integrating oscilloscope, logic analyzer and signal source into one, bringing you a more efficient test experience..
Rich trigger function to meet more test conditions, and the time base of each channel is independently adjustable, which is convenient for users to observe four signals with large frequency differences at the same time..
It has a fast numeric keyboard to input the required data quickly and effectively, and it has an independent 4-window display to bring a more efficient user experience..
70Mpts storage depth per channel, while observing four channels of signals at the same time, it can maintain the highest sampling rate for a longer period of time, without losing any waveform changes, and can also analyze waveform details.
DSO 138 DIY Oscilloscope Kit Opening Source 2.4″ TFT 1MSPS Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Sized 13803K, SMD Soldered Electronic Learning Set
Digital DIY oscilloscope uses ARM Cortex-M3 processor and contains a 2.4-inch color TFT display, which can be used as an ARM development test board..
Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
Can make a tailor-made software development on the basis of this kit, which can be can be changed to millivoltmeter, data recorder, etc..
The variety of components is suitable for students to understand the oscilloscope structure and principles, and do in-line component welding, and chip component welding training..
The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..
✅【2021 UPGRADED OSCILLOSCOPE】: Seesii handheld digital oscilloscope with 2.4inch TFT high definition screen, made of high quality materiels, lightweight and portable,durable enough for long term use, with the protective silicone covers on both sides of the instrument, which can protective the product and prolong the service time of it.Suitable for home appliance inspection, automotive diagnostics, research and education, product development, utility testing and many other applications..
✅【HIGH QUALITY & MULTIFUNCTIONAL】:This is a fully functional, practical and cost-effective professional portable oscilloscope. The waveform bandwidth up to 120MHz with an equivalent sampling rate of 500MSps. Support 1kHz、10kHz、100kHz、1MHzfour-position square wave signal output.Store up to 2500 waveforms, support thumbnail view, waveform delete and other functions..
✅【3 TRIGGER MODES & WAVEFORM PARAMETER SETTABLE】:The DIY oscilloscope kit configured 3 trigger modes, auto/normal/single trigger.Support waveform parameter setting,such as time base, amplitude, trigger slope, etc. And Support waveform one-key AUTO to automatically adapt to the screen, no need to adjust parameters,convenient and accurate measurement, can meet your different measurement ....
