Best Molex Distributor

FPVERA 2PCS Drone Batteries 3.7V Lipo Battery USB Charger and 650mAh Lipo Battery with Battery Charger for SYMA X5 Serial UAV Drone Quadcopter Rechargeable Battery

  • PLEASE CHECK YOUR DRONE BEFORE ORDER! Come up with 2PCS 650mah lipo batteries and 1 USB charger. The connect type is molex. Suit for all devices with a voltage of 3.7V and molex connect type. The battery Size: 1.7in * 0.98in * 0.31in,Please confirm the Connector and Size before you order..
  • Over charge protection- Short circuit protection. When the battery voltage is too high, the charger will stop. It will protect batteries from the damage and the lifetime of batteries will be longer..
  • Portable and light-charge at any time you want. The product is only 17.6g and very convenient to carry. You can charge in multiple ways, such as computer, power bank and vehicle power supply..
  • The charging time is about 1 hours, and the best operation time is about 8minutes. (Different models may have different performance.) The combination of two batteries allows you to use at least 15 minutes more to increase your flight experience Wide Application:No modification necessary! Exact.
  • Wide Application-No modification necessary! Exact replacement for Hubsan X4 (H107C-HD), X4 (H107C), X4 (H107D).
  • Beginners X708W Wi-Fi Fpv Training Quadcopter.
  • Syma X11, X11C, X51,X5 X5C X5SW X5SC-1 X5A-1.
Check Stock

EnDuraLast Super Lube 2 Distributor Cam Grease - 7/8 Ounce Tube Lubricam

  • Super Lube 2 Distributor Cam Grease 7/8oz (25g) tube for use as distributor lube grease, cam lubricant for rubbing block on contact point set..
  • Make/Model: All / Model Years: All / Manufacturer : All.
  • Typical Application: Contact set rubbing block / Spark plug boots.
  • Ignition Distributor advance weights, springs and cam lobe.
Check Stock

IWISS IWS-3220M Micro Connector Pin Crimping Tool 0.03-0.52mm² 32-20AWG Ratcheting Crimper for D-Sub,Open Barrel suits Molex,JST,JAE

  • Ideal for micro connector pins with capacity 0.03-0.52mm² 32-20AWG.
  • Typical parallel crimping type ensures stability and power equality and improves 30% of the crimping-tightness.
  • Double-layer Wire Electrical discharge machining(EDM) Cutting jaw crimps conductor and insulation sheath simultaneously.
  • Easy to operate with well-made ratchet mechanism and light environment-friendly handle made of TPR.
  • Suits Molex CLIK-Mate,Molex PicoBlade,JST SHD,JAM,TYCO D-100,etc.
Check Stock

Coffee Distributor & Tamper,53mm Dual Head Coffee Leveler,Coffee Distribution Tool,Adjustable Depth Both Sides- Professional Espresso Hand Tampers

  • Dual Head- Distributor/Leveler and tamper are designed in one, double sides are available..
  • Consistent Brew- Get consistent distribution and pressure every time making it easy to pull your perfect shot right at home, Leveling your grounds before tamping creates a uniform and consistent tamp..
  • Adjustable Depth - Set your desired tamping depth for consistent tamping pressure every time..
  • 53mm Adjustable Distributor & Tamper-The Distributor is compatible with the tapered Breville 54mm portafilter baskets, including the Barista Express, Pro, Touch, Bambino Plus, Infuser, and Duo-Temp Pro..
  • If our 53mm Dual Head Distributor/Leveler and tamper did not work well ,please kindly contact us for exchange, refund or return..
Check Stock

A-Team Performance - EST Marine Electronic Ignition Distributor and Coil Upgrade Kit 3.0L Delco EST For 4 Cylinder Applications - Compatible with Mercruiser Black Cap

  • EST Marine Electronic Ignition Distributor and Coil Upgrade Kit 3.0L Delco EST For 4 Cylinder Applications.
  • Compatible with Mercruiser, Volvo Penta, OMC, Indmar, PCM, Marine Power, EST V8 5.7 7.4.
  • Kit Includes: EST Electronic Distributor, Coil, Timing Shunt, Pigtail Plug, Coil-to-Distributor Wire.
  • Features: New (Authentic GM) Delco Marine Electronic Distributor, For 4 Cyl applications, Fits 3.0L engines, GM Number 01103782.
  • Features advanced engineering, black heavy-duty cap and rotor with highest dependability and performance, and fuel economy version..
Check Stock

DS LED Light Strip RED Computer Lighting with Magnetic for PC Case Lighting Kit (2Pack,30CM, Molex Connector, S Series)

  • Magnetic Design: This LED Strips Are Firmly Attached to PC Case Via Magnet Inside, Suitable for Iron Surface Only.
  • Plug and Play Design LED Strip with Molex Connector.
  • LED Strip Length: 19.7 inches(with 7.9 inches Cable).
  • Molex Connector: Almost Compatible with All Model of PC Case.
  • Can Be Compatible with Blue, Green, Pink, White, Gold and UV Lights for Create Different Colors to Decorate Your Computer Case.
  • Good Quality Super Brightness: Computer Case Light is Super Brighter Than The Normal LED Strips to Achieve Best Lighting Effect for Your PC Computer.
  • Risk-free Purchase: If you have any questions, please contact us immediately, DS LEDdess will reply within 24 hours.
Check Stock

SDTC Tech 4 Pin Male IDE Molex to 15 Pin Female Dual SATA Power Splitter Adapter Cable 18AWG Copper Serial ATA Hard Drive Extension Cable (20cm) - 2 Pack

  • IDE Molex to SATA Power Cable, Converts 4-Pin male plug into 2x 15-Pin Serial ATA Female Connectors..
  • Cable: 1007 18AWG, Length: approx. 20cm, Conductor: Copper..
  • Installation: Connect to motherboard 4-Pin IDE Molex Connector and the other side Connect to15-Pin Hard Drives or CD ROM Drives Plug..
  • Use to adapt older power supply uints for use with new SATA devices, and powering two devices from one interface..
  • Application: suitable for Hard Drives, Solid State Drives, CD ROM Drives, HHD, SSD, DVD Drives etc..
Check Stock

StarTech.com 60x10mm Replacement Ball Bearing Computer Case Fan w/ TX3 Connector - 3 pin case Fan - TX3 Fan - 60mm Fan (FAN6X1TX3)

  • A dual ball bearing design ensures reliability and longer life.
  • Comes ready for either 3-pin motherboard fan headers or LP4 Molex power supplies.
  • Backed by a StarTech.com 2-year warranty and free lifetime technical support.
  • Includes a 3-pin to 4-pin LP4 Molex adapter.
Check Stock

THEBIGDEALS Distirbutor Cap D329A GM 10452459 10452457 Compatible with Cadillac Chevy GMC 5.0 5.7 Vortec 305 350

  • Preminum Quality: The D329A distributor cap is made of strong PBT and PET plastic housing. With metal inserts inside, it ensures maximum conductivity between distributor towers and spark plug wires. And there is a full anti-arc barrier to prevent secondary voltage arcs and engine misfire..
  • OE Design: The distirbutor is designed with OE part #. The easy to read lacator keys on caps make the installation much easier. The replacement OE numbers are 10452459, 10452457 and D329A..
  • Fitment: This distributor cap is a direct replacement for your GM vehicle’s original factory component. For more detailed fitment info, please check the product description below..
  • Compatibility: This distributor cap is compatible with Chevy GMC 5.0 5.7 Vortec 305 350. You can check the fitment bar above for more detailed info..
  • Warranty: 100% satisfaction. If you need any assists during usage, we are here to help..
Check Stock

New Distributor Compatible With 1993-1997 Compatible With F-150 F250 F350 W/ 351 Windsor V8, Replaces Compatible With F4TE-12127-AA, F4TZ-12127-A

  • 【Complete HEI Distributor】--Complete HEI Distributor 65K Coil 7500 RPM - One Wire Installation, Blue cap.
  • 【Vehicle Fitment】--Compatible with Small Block Ford SBF 5.8 L 351W Windsor 8 Cylinder.
  • 【High Performance】--Coil Spark of 7,500 RPM - With high voltage of up to 65,000.
  • 【OE+ Durability】--Manufactured by certified OE distributor manufacturer and Heavy Duty- With high grade hardened steel gears, utilizing the 4-pin ignitionOE+ Durability - Manufactured by certified OE distributor manufacturer and Heavy Duty- With high grade hardened steel gears, utilizing the 4-pin ignition.
  • 【CNC Machined】--Polished Aluminum shaft and a chrome-moly gear.
Check Stock