Best Motherboard Cable

Unigine Heaven Benchmark Original Soundtrack

  • FULL-SPEED PCI-E 3.0 x16 128Gbp/s BANDWIDTH: AsiaHorse pcie 3.0 riser cable will deliver all the performance of PCIe 3.0 to your GPU, supporting PCI 3.0/2.0/1.0 applications. Doesn’t Support PCIE4.0..
  • EMI SHIELDED DESIGN: The pcie riser cable utilizes the latest materials for EMI shielding, allowing each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance..
  • EXTENDED AND ANGLE: With 25cm of cable length and a 180° female PCIe connector, making this pcie extender minimizes cable stress and easily install your GPU in compatible cases..
  • COMPATIBILITY: Flexible and extended PCI-Express slot with 1x/4x/8x/16x compatibility. Support GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RTX3080,RTX3090, RX570, RX580, GTX680, GTX670 GTX760 etc..
  • NOTICE: The transmission speed depends on the motherboard and graphics card speed is consistent. For example: PCI-E graphics card is 2.0, the motherboard PCI-E 16X is 3.0, then the actual transmission speed is 2.0, and vice versa..
Check Stock

Unigine Valley Benchmark Original Soundtrack

  • FULL-SPEED PCI-E 3.0 x16 128Gbp/s BANDWIDTH: AsiaHorse pcie 3.0 riser cable will deliver all the performance of PCIe 3.0 to your GPU, supporting PCI 3.0/2.0/1.0 applications. Doesn’t Support PCIE4.0..
  • EMI SHIELDED DESIGN: The pcie riser cable utilizes the latest materials for EMI shielding, allowing each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance..
  • EXTENDED AND ANGLE: With 25cm of cable length and a 180° female PCIe connector, making this pcie extender minimizes cable stress and easily install your GPU in compatible cases..
  • COMPATIBILITY: Flexible and extended PCI-Express slot with 1x/4x/8x/16x compatibility. Support GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RTX3080,RTX3090, RX570, RX580, GTX680, GTX670 GTX760 etc..
  • NOTICE: The transmission speed depends on the motherboard and graphics card speed is consistent. For example: PCI-E graphics card is 2.0, the motherboard PCI-E 16X is 3.0, then the actual transmission speed is 2.0, and vice versa..
Check Stock

Unigine Tropics Benchmark Original Soundtrack

  • FULL-SPEED PCI-E 3.0 x16 128Gbp/s BANDWIDTH: AsiaHorse pcie 3.0 riser cable will deliver all the performance of PCIe 3.0 to your GPU, supporting PCI 3.0/2.0/1.0 applications. Doesn’t Support PCIE4.0..
  • EMI SHIELDED DESIGN: The pcie riser cable utilizes the latest materials for EMI shielding, allowing each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance..
  • EXTENDED AND ANGLE: With 25cm of cable length and a 180° female PCIe connector, making this pcie extender minimizes cable stress and easily install your GPU in compatible cases..
  • COMPATIBILITY: Flexible and extended PCI-Express slot with 1x/4x/8x/16x compatibility. Support GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RTX3080,RTX3090, RX570, RX580, GTX680, GTX670 GTX760 etc..
  • NOTICE: The transmission speed depends on the motherboard and graphics card speed is consistent. For example: PCI-E graphics card is 2.0, the motherboard PCI-E 16X is 3.0, then the actual transmission speed is 2.0, and vice versa..
Check Stock

Unigine Superposition Benchmark Original Soundtrack

  • FULL-SPEED PCI-E 3.0 x16 128Gbp/s BANDWIDTH: AsiaHorse pcie 3.0 riser cable will deliver all the performance of PCIe 3.0 to your GPU, supporting PCI 3.0/2.0/1.0 applications. Doesn’t Support PCIE4.0..
  • EMI SHIELDED DESIGN: The pcie riser cable utilizes the latest materials for EMI shielding, allowing each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance..
  • EXTENDED AND ANGLE: With 25cm of cable length and a 180° female PCIe connector, making this pcie extender minimizes cable stress and easily install your GPU in compatible cases..
  • COMPATIBILITY: Flexible and extended PCI-Express slot with 1x/4x/8x/16x compatibility. Support GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RTX3080,RTX3090, RX570, RX580, GTX680, GTX670 GTX760 etc..
  • NOTICE: The transmission speed depends on the motherboard and graphics card speed is consistent. For example: PCI-E graphics card is 2.0, the motherboard PCI-E 16X is 3.0, then the actual transmission speed is 2.0, and vice versa..
Check Stock

8 GPU Mining Rig Frame 68mm Slots with 8 Fans, Cryptocurrency Mining Machine with Barebone Motherboard for ETH/ Ethereum, Miner Case with RAM, SSD

  • 【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
  • 【8 Fans Support & Fan Controller 】 The cryptocurrency mining rig is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please....
Check Stock

CERRXIAN 4 Pin PWM Fan Hub Splitter Power Supply Cable 1 to 5 Way PC CPU Cooling Case Fan Power Extension Cable for ATX Computer Case 4-Pin & 3-Pin Cooling Fans(14.8inch)(2-Pack)

  • 4-PIN INTERFACE :4-pin PWM fan power supply splitter extension cable can extend 1 CPU fan port to 5 fan ports to solve the lack of pc case fans ports and reduce the load on the motherboard..
  • EASY TO INSTALL :Just insert the PWM chassis fan splitter cable into the motherboard, and then paste the other end to the chassis with double-sided tape. No need to drive..
  • CONNECTOR TYPE :1 TX4 4-pin Female, 1 TX4 4-pin Male for CPU fan (including Detect tach pin), and 4 TX4 4-pin Male for case fan.Compatible with all 12V 4 pin and 3 pin PC case fans..
  • NYLON BRAIDED CABLE :15-inch fan HUB cable with black braided sleeve and tinned copper wire, lower resistance, stable and durable quality..
  • NOTE :Only 1 interface supports speed measurement because the motherboard does not support multiple interfaces at the same time.3-pin does not support temperature control..
Check Stock

OwlTree 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard 10.6 inch

  • Compatible: work with motherboard with ATX 4 pin, 8 pin or 8+4 pin ports.
  • Connector A: EPS 12V 8 Pin CPU Female Connector. Connector B: ATX 12V 8 Pin (4+4 Detachable) Male Connector. Connector C: ATX 12V 4 Pin Male Connector.
  • Length: 10.6inch/27cm, UL1007 18AWG, 34*0.178TS Tinned Copper Wire, Higher Quality than Regular Cable.
  • Solution: The CPU 8 Pin Female to CPU 8 Pin (4+4) +4 Pin Male Cables provide a good solution for the motherboard required 8+4 pin ATX ports,Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket..
  • This cable only works with motherboard, not PCI-Express video cards. Serious damage can be caused if your use it in place of PCI-Express video cards..
  • Package: 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male CPU Power Adapter (10.6in).
Check Stock

ThreeBulls 5 Pack 4-Pin PWM Fan Splitter Cable, Sleeved Braided Adapter Computer PC Fan Power Extension Cable Converter for Computer ATX Case 4-Pin/3-Pin Cooling Fan Cable (10.6')

  • Excellent 4 pin PWM fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case..
  • Widely Compatible: The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans..
  • Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans..
  • Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy..
  • Package contents: 5 pack black 10.6 inch fan power supply extension cables, male to female connector plug..
Check Stock

3 Pack PWM Fan Splitter Cable 1 to 3 (4 Pin+3 Pin)

  • PC fan splitter cable:these 27 cm extension cables allow you more choice in where you want to position your PWM or fans inside your case, good for your daily use.
  • This Y-type splitter cables is convenient for running three fans on one fan header.
  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header ;Every Pack Compatible With 1 pcs 4 Pin + 2 pcs 3 Pin PMW Fan Connector.
  • CPU fan splitter cable Product function:provide two additional fan to increase airflow in your computer case, reduce the accumulation of heat within the chassis.
  • The 4-pin connector supports 3-pin and 4-pin fans.
  • Temperature control: the pwn fan splitter cable provide additional fans to increase airflow in the computer case, reduce the temperature and ensure the operational speed of CPU.
  • Supports 3 PWM fans from a single motherboard PWM header.
  • Compatible with 4pin PMW fan connector and 3pin fan connector.
Check Stock

upHere 3-Pack High Airflow Quiet Edition White LED Case Fan pwm 4in for PC Cases T4WT4-3

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to....
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using....
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed....
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a....
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler....
Check Stock