Vetroo AL600 Mid-Tower ATX PC Case, Top 360mm Radiator Support, 3x120mm ARGB Fans, 3x120mm Regular Fans, Airflow Mesh White Gaming Case w/ Controller Hub
Pre-installed 6x 120mm Fans: Pre-installed 3x 120mm ARGB fans in the front and 3x 120mm regular fans in the rear and bottom provides the better airflow for the case and components..
Support Top 360mm Radiator: With support for up to a 360mm liquid cooling radiator in top, the case is easy to build with and easy to cool your CPU better..
Three Airflow Channel: Pre-installed fans and two fan locations next to the motherboard can provide the great airflow for the CPU, GPU and case in the same time..
Controller Hub Included: You can customize RGB lighting and speed, create vivid, dynamic lighting and speed synchronized with the rest of your system..
Door Opening Design: Hinged and magnetic tempered glass side panle with hand provide convenient to remove without any tools..
Multi-Functional I/O Panel: You can directly control the lighting of ARGB fans via reset button if you connect the reset cable to the 2-Pin interface of controller..
Cable Management System: 2 wire combs are included behind the motherboard tray to aid in cable management and keep your case more cleaner..
EZDIY-FAB 120mm Computer Case Fan,Motherboard Aura Sync Fan,High Airflow,Speed Adjustable,Addressable RGB Fan with Fan Hub and Remote-5 Pack
With 16 ultra-bright RGB LED lights, provides full lighting for your build, achieving magical lighting effects with multiple-choice controls and 300 more modes like breathing, static, and multi-color cycling..
With EZDIY-FAB Fan Hub X and 21-key remote:You can instantly adjusting LED back-light effects, colors, brightness and Fan speed. Note: fan speed only controlled by remote.
Center design addressable RGB LED offered best lighting effect: Center LED design kept RGB lighting Effect at a optimal point and leave tolerance for other RGB components such as Mobo/ RAM/ GPU, water cooling components, and SSD plate.
Synchronizable RGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 pin RGB Header (5V, D, -, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy this fans.
Super Quiet-Equipped with rubber pads and hydraulic bearing, which greatly reduce operating noise and improves efficiency..
Micro Center Intel Core i7-11700K Desktop Processor 8 Cores up to 5.0 GHz Unlocked LGA 1200 125W Bundle with ASUS TUF Gaming Z590-PLUS WiFi ATX Gaming Motherboard
11th Generation Intel i7-11700K CPU Processor and ASUS Prime TUF GAMING Z590-PLUS WIFI Motherboard bundle combo, maximize performance, speed and connectivity whenever you game, design, record, stream, web browsing, document editing and more. Pack in a bundle, compatibility guarantee, purchase with confidence.
LGA1200 Sockets Supported, a fan or heat sink not included.
CPU Support Maximum Memory Capacity 128 GB, DDR4-3200 MHz, No ECC memory, up to 2 memory channel, 50GB/s max memory bandwidth. Built-in Intel UHD Graphics 750 (Rocket Lake), Intel Optane Memory Supported..
ASUS TUF GAMING Z590-PLUS WIFI Motherboard. Intel LGA 1200 socket. Triple M.2/NVMe SSD, Front panel USB 3.2 Gen 1 Type-C header and Thunderbolt 4 header. Intel WiFi 6 AX201 (802.11 ax), Intel I225-V 2.5Gb LAN, TUF LANGuard and TurboLAN technology.
Enhanced power solution: 14+2 DrMOS power stages, six-layer PCB, ProCool sockets, military-grade TUF components and Digi+ VRM for maximum durability.
Comprehensive cooling: Enlarged VRM heatsink, PCH fanless heatsink, M.2 heatsinks, hybrid fan headers and Fan Xpert 4 utility.
teenage engineering Computer-1 Mini-ITX Computer Case with Powder Coated Aluminum Chrome Metal Handles and Dual-Slot GPU Do It Yourself Small Form Factor PC Case Compatible with SFX Power Supply
BUILD YOUR OWN MODULAR PC CASE - The teenage engineering Computer-1 features a DIY flat design that requires you to assemble the case. The kit includes every part* you need — from the aluminum sheets to an illustrated build guide..
PROVIDES A SMALL DESK FOOTPRINT - The case's exterior has a compact 7.48" x 6.69" x 12.68" overall dimensions (with handles). If you're a musician or sound engineer with lots of music gear placed on the work table, Computer-1 fits right in..
OFFERS ENOUGH SPACE FOR THE ESSENTIAL COMPONENTS - The small Mini-ITX form factor features a 7.44" x 6.46" x 10.85" interior with 5.79" width from the motherboard to case. Computer-1 has up to a 7" GPU dual slot and is compatible with the SFX power supply format..
BE THE COOL KID - The case's CPU cooler has a height limit of 4.72" from the motherboard surface..
BE BOLD - Computer-1 comes in an eye-catching orange RAL 2004 powder-coated finish. The aluminum case includes robust chrome metal handles that can hold the weight of the entire tower..
※Powerful slot: This B75 motherboard has a NGFF M.2 high-speed hard disk interface with a transmission speed of up to 32Gbps. In addition to PCIe X1 and PCIe X16 graphics card slots, this B75 motherboard also has a PCI expansion slot, which is an indispensable and important slot for installing independent sound cards and network cards..
※Dual channel DDR3 memory: The maximum memory supports two 16G memory, memory type DDR3 1280/1333/1600/1866MHz desktop memory..
※High-quality motherboard: The 6-layer PCB motherboard provides a faster operating speed, while being more robust and not easily damaged. All solid capatitor ensures sufficient power supply to ensure stable CPU operation..
EZDIY-FAB [20cm] PCIE 4.0 16x Extreme High Speed Riser Cable PCI Express Port GPU Extension Card-Right Angle Connector
Imported cable and the core is made of pure copper tinning process, which ensures the signal is full speed, stable and almost no attenuation transmission..
Sectional cable design allows better airflow..
Tested and supports RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800.
Compatible with most GPU/motherboard components and fits most cases..
Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered
【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power
【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
HYTE Revolt 3 Small Form Factor Premium ITX Computer Gaming Case with 700W Gold SFX Power Supply Black
The HYTE Revolt 3 ITX Case is a small form factor case with user friendly design, high degree of compatibility and carrying handle for portability at....
Compatible with any standard layout ITX form factor motherboard.
Easily removable external panels on all sides of the case give users 360-degree accessibility to components and wiring.
Comes included 700W 80+ Gold SFX power supply, cables are partially pre-routed to help guide the building experience and save time..
Features 2x USB 3.2 Gen 1 Type-A ports, a headset combo jack, and USB 3.2 Gen 2 Type-C port..
