Best Motherboard For 6800k 2

USB 3.0 to 2.0 Adapter Header Cable Converter USB3.0 19 Pin Female to USB2.0 9 Pin Male convertor Motherboard from Intel ASUS Gigabyte MSI Ports(19Pin Female to 9Pin Male)

  • Connector Type: USB 3.0 19 Pin Female To USB 2.0 9 Pin Male. Compatible Devices: USB 2.0 based mother boards, like Intel ASUS Gigabyte MSI Ports..
  • Custom Made usb 3.0 to 2.0 convertor for installing a USB 2.0 based motherboard into a PC cabinet with Front USB 3.0 Ports..
  • Allows you to connect internal USB devices directly to the motherboard header connection..
  • Let your USB 3.0 19 pin device connected the USB 2.0 9 pin motherboard. Data speed: 480Mbps for USB 3.0 device..
  • 12 cm Length - selling in reverse configuration too..
Check Stock

5DN3X Dell Studio XPS 9100 Intel Desktop Motherboard s1156, MIX58EX

  • **Note: The Dell Motherboard Part Number G3HR7 and the T568R both fit the Dell XPS 8100. They are the same in every aspect with the exception of one thing. The mounting design for the heatsink are different. On the G3HR7 Motherboard the Heatsink mounts via threaded screws, on the T568R the mounting is via plastic tabs that press into the motherboard. One with not fit the other. We have found the correct heatsink for the G3HR7, that is being sold here, is the Dell F2K99..
  • Chipset: Intel H57, Known Supported Processors (and Similar): Socket Type: LGA1156, Intel Core i7-870, Intel Core i7-860, Intel Core i7-750, Intel Core i5-670, Intel Core i5-661, Intel Core i5-660, Intel Core i5-650, Intel Core i3-540, Intel Core i3-530.
  • Supported Memory: Connectors four internally-accessible DDR3 DIMM sockets Capacities 1 GB, 2 GB, and 4 GB Memory type 1066-MHz or 1333-MHz DDR3 DIMM.
  • non-ECC memory only Memory configurations possible 4 GB, 6 GB, 8 GB, 12 GB, and 16 GB (64-bit operating system), Audio: Integrated 7.1 channel, High Definition audio with S/PDIF support.
  • Video: Intel Graphics Media Accelerator HD, Expansion Capabilities: PCI one 124-pin connector, PCI Express x1 two 36-Pin Connectors, PCI Express x16 one 164-Pin Connector.
Check Stock

JMT 9 Pin USB Adapter to SATA SDD 2.5 Inch SDD Power Supply Cable for ITX Motherboard Main Board Notebook

  • The wire can load the biggest current of 2A..
  • Material :22AWG  Pure copper tinned wire.
  • Suitable for? standard 9-pin USB pin on a regular desktop motherboard ,ITX motherboard and all-in-one motherboard..
Check Stock

CO-RODE 48pcs M.2 SSD Standoffs and Screws for Asus, Gigabyte, MSI Motherboards

  • M.2 Standoffs Screws NVME SSD mounting screws for ASUS, MSI, Gigabyte motherboards.
  • Two types of M.2 Standoffs Screws for ASUS motherboard(Silver and Black).
  • M.2 Screws:Perfect for laptop M.2 2280 SSD screws.
  • Ideal for universally computer laptop repair, also can use for electronics, computers, PC motherboard, DIY hobby etc.
Check Stock

upHere 3-Pack High Airflow Quiet Edition White LED Case Fan pwm 4in for PC Cases T4WT4-3

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to....
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using....
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed....
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a....
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler....
Check Stock

Csdtylh 320Pcs M3 Motherboard Standoffs&Screws&Nuts Kit Hex Male-Female Brass Spacer Standoffs Laptop Screws for DIY Computer Build Electronic Projects Raspberry Pi Circuit Board etc.

  • 【HIGH QUALITY】Packaged included 320pcs M3 motherboard standoffs and screws. The M3 standoff kit is very good value, which has a wide selection of standoffs and connectors.The M3 laptop screws kit has nice brass finish with quality threads.The motherboard standoffs fit nicely, thread cleanly and the variety in this m3 standoff kit is more than enough for all of the components in your DIY build..
  • 【GOOD ASSORTMENT】The M3 standoff kit is a very nice assortment of brass standoffs and all neatly organized in a compartment box. All the threads in the M3 computer screws kit are correctly sized, clean, and burr free.The m3 standoff kit box holding all the motherboard screws pieces is a good bonus to keep all motherboard standoffs organized in their own compartment..
  • 【EASY TO USE】The M3 standoff kit is a great kit with a lot of options. The M3 standoff kit are simple to work with, yet usable. The M3 motherboard standoffs and screws kit is easy to adjust the selected step or rise. The motherboard standoffs are easy to install and durable to use, too..
  • 【MUTIPURPOSE】 The motherboard standoffs kits are versatile. If you are a DIY computer builder, a little M3 standoff kit box of these motherboard standoffs and screws is essential. The motherboard scre....
Check Stock

JINGYUE X99 Gaming Motherboard Intel LGA 2011-V3 ATX Desktop Motherboard with Diagnostic Card Dual M.2 NVME/Four-Channel DDR4 ECC/5 PCIe/SATA 6Gb/s Heat Dissipation Server Motherboard Max 256G

  • 【Intel LGA 2011-3 socket】 This X99 desktop motherboard is used in the LGA 2011-3 socket and supports Intel i7, XEON E5 V3/V4 series processors..
  • 【Four channels DDR4 Memory Slots】 Support 4 DDR4 or DDR4 ECC memory, 2133/2400/2666/3000MHz effective frequency, the maximum capacity is 256G.....
  • 【High heat dissipation】 X99 D4 ATX motherboard comes with a high-frequency silent fan, plus a VRM heat sink can achieve efficient heat....
  • 【Game-level expansion slots】 expansion slots include 3 PCI-EX16 slots, 1 PCI-EX4 slot, 1 PCI-EX1 slot, 4 SATA 3.0 ports, 2 SATA 2.0 ports, 2 USB....
  • 【High-quality motherboard】 This desktop motherboard is made of 10-layer PCB board, which can effectively extend its service life while ensuring....
Check Stock

MLLIQUEA 847 Mining Motherboard, 8 GPU Slots Mining Machine System, Cryptocurrency Miner Barebone Motherboard for BTC/ETH/ZEC with SSD, RAM

  • 8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 65mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. This motherboard is adapted to the mining rig frame customized for B85/847 sold in our store..
  • Upgrade Material - Our mining GPU motherboard is made of high-quality steel, which is sturdy and durable, and can be reused. One large CPU cooling plate, super heat dissipation. You can install your own external cooling fan, fast heat dissipation to ensure your normal use. Can fully protect your GPU and electronic equipment from damage. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W PSU, which is sold in our store, more efficient mining..
  • Safe and Silent - It can ensure silent performance, low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
  • Eth Mining Rig - Motherboard: LGA(1150) CPU(with CPU radiating plate), 128GB SSD (Installed), 4G RAM, 6 PIN cable to (6 + 2) Pin 8pcs. Note: The hard disk is not equipped with a system. After you log in to the official website of the s....
Check Stock

JGINYUE Intel X99 Desktop Server Motherboard LGA 2011-V3 Dual CPU Gaming Motherboard E-ATX Dual M.2 NVME 8 Channel DDR4 ECC 5 PCIe SATA 6Gb/s Dual RJ45 with Diagnostic Card Max 512G

  • ✹Intel dual CPU LGA 2011-3 socket: This X99 E-ATX gaming motherboard adopts dual CPU design, Intel series LGA 2011-3 socket, supports Intel i7, XEON....
  • ✹8-channel DDR4 memory slot: 8 DDR4 or DDR4 ECC memory can be installed, support 2133/2400/2666/3000MHZ frequency memory, maximum support: 512G....
  • ✹High scalability: Multiple expansion interfaces include 3 PCI-EX16 slots, 2 PCI-EX1 slots, 8 SATA 3.0 interfaces, 4 USB 3.0 slots, 2 USB 2.0 slots,....
  • ✹Professional heat dissipation: X99 computer motherboard is equipped with 3 VRM heat sinks, adopting aesthetic design, compact and practical, and....
  • ✹High-performance motherboard: X99 desktop server motherboard is equipped with C612 chip, 12-layer PCB board design, with faster transmission....
Check Stock

65W Replacement AC Adapter Laptop Charger for Dell Latitude 13 3301 3310 3390 14 3400 3410 3420 3490 15 3500 3510 3520 3590 Vostro 13 5301 5390 14 5401 5402 5490 15 3558 3559 Power Cord

  • Genuine Dell Motherboard For Inspiron 530 530s and Vostro 200/400 Systems. Please Note This is the G33M02 Model This motherboard comes in two varieties G33M03 and G33M02. They are essentially the same but require two different heatsinks and vary in capacitor placement. Please ensure this is the correct motherboard for your replacement. You may be required to purchase a new heatsink to install correctly..
  • Chipset: Intel G33 Express / Supported Processors: Many Intel Core 2 Duo / Quad Processors - But not all Known to work: E2180, E4400, E6550, E6600, E2140, E2180, E6320, E6700, E4300, E6420, E4500, E6750, E2220, E8300, E4700, E2200, E8200, E8400, E8500, E4600, E6850, Celeron D420, D430, D440.
  • Memory: Up to 4GB Dual-Channel DDR2 SDRAM / Video: Integrated Intel Graphics Media Accelerator 3100 / Audio: Integrated 7.1 Channel Audio.
  • Expansion Capabilities: PCI: 2 Slots PCIe x1: 1 Slot PCIe x16 (Graphics): 1 Slots / Motherboard Compatible Part Numbers: G679R, K216C, CU409, RY007, G33M02.
  • Peripheral Interfaces: 1 DVI, VGA and 1 S-Video (with add-in PCI-Express video card), IEEE 1394 (optional): 1 - 6-pin serial connector, 10 USB ports (4 Front, 4 back) + 2 internal, 6 back-panel connectors for line-in, line-out, microphone, rear surround, side surround, two fro....
Check Stock