Best Motor Driver With Fault Protection

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

  • 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface could be connected with Driver Board easily.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
  • Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check Stock

BOSCH PS11-102 12V Max 3/8 In Right Angle Drill/Driver Kit with 2.0Ah Lithium Ion Battery

  • POWER: A 12V motor provides 1,300 RPM as well as 115 in-lbs. max torque in a lightweight drill driver weighing only 2.75 lbs..
  • VERSATILE: The 5-position pivoting head articulates from 90-degrees to 180-degrees, making it the perfect drill driver combo for working in tight....
  • CONVENIENT: The 3 8-Inch auto lock chuck allows for simple bit replacements and a variety of applications including anything from driving 3 inch....
  • VARIABLE SPEED: The PS11-102 utilizes a variable-peed trigger for perfect speed regulation. This tool is signifcantly faster than current competition....
  • PRECISION: Comes standard with a motor brake for exact serial screw driving and Bosch's Electronic Cell Protection to ensure longer battery life and....
Check Stock

6Pcs L298N Motor Drive Controller Board DC Dual H-Bridge Stepper Motor Control and Drives Module for Arduino Micro:bit Smart Car Robot UNO MEGA R3 Mega2560

  • ★L298N as main driver chip makes strong driving ability and strong anti-interference,dual-channel h-bridge driver working mode creates higher working efficiency,,drive stepper dc motors to work.to avoid damage the voltage stabilizing chip, please use an external 5v logic supply when using more than 12v.
  • ★Dual-channel H-bridge driver working mode creates higher working efficiency..
  • ★To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • ★Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • ★L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
Check Stock

5 PIECES THERMAL CUTTOFF CUT-OFF FUSE 104 CELSIUS DEGREES

  • This is a single-use device that cannot be reset and must be replaced when it fails or is triggered..
  • The use of thermal particulate materials as a thermal insulation of the metal thermal fuse..
  • Function is to cut off the circuit of appliances when temperature exceed specified TF value because of unexpected fault..
  • Widely used in electric current provider, power switch, computer, telephone, home appliance, communication products, all kinds of instrument and electronic and electric components, motor and all kinds of small home appliance such as electric iron, thermoelectric blower, microwave oven, refrigerator etc. as heat protection, etc..
Check Stock

Club Nitro

  • DRIVER - All new lightweight engineered driver designed with a smooth leading edge. Easy launch configuration and low-back powerful CG delivers a superior distance and exceptional accuracy. (Headcover included).
  • FAIRWAY WOOD - The light weight and low-back CG with smooth head shape design delivers powerful and accurate long-distance performance. (Headcover included).
  • HYBRID - Lightweight, high MOI head shape design combined with aero-tech material alloy hitting face, delivers long distance and superior accuracy. (Headcover included).
  • IRONS - X-Factor irons feature wide sole contact area with lower and deeper CG structure design. This provides maximum performance, control, and high fault tolerance. The irons deliver precise shot making and exceptional distance..
  • PUTTER - All new alignment system and wide sole delivers precise stability on the green. Stand Bag - This compact light-weight functional stand bag with oversize apparel pocket and two large multifunction pockets, makes it easy to carry and organize all the equipment you need..
Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock

eMylo Smart RF Motor Controller Switch Relay Wireless Remote Control Switch 12V Motor Switch 433Mhz for Rolling Door, Electric Curtains/Locks, Water Pump, DC 5V-24V with 2 Transmitters (1 Pack)

  • ★ Motor wireless remote control switch: It is specially designed for motor. Two-channel design capable can control the forward, reverse and stop of the motor, and with long control distance..
  • ★ Technology Upgrade: the transmitters and receivers adopt non-directional wireless encoding technology, allowing independent control, without mutual interference, High-performance "TUYA "chip module, which stable performance, sensitivity..
  • ★ Easy Installation: Using the Special jointing clamp to connect the motor and wireless relay in one minute. No need any tools. Avoid opening the box during installation and ensure firm connection and safe operation..
  • ★ Stability & Safty: The relay module is with signal sensitivity and resist interference. RF motor controller can pass through walls, floors and doors to control receiver within the valid range. Made of the ABS material and flame retardant material, overvoltage protection and fire protection, safer..
  • ★ Widely Application: Structural upgrading eMylo motor driver reversing controller switch allowing independent control without mutual interference. Commonly used in rolling doors, electric curtains, electric door locks ,water pump and other motor machines. Start your smart life now..
Check Stock

LightingWill LED Driver 120 Watts Waterproof IP67 Power Supply Transformer, 90-265V AC to 24V DC Low Voltage Output, Adapter with 3-Prong Plug 3.3 Feet Cable for Outdoor Use, Computer Project

  • ✅The Model of LED Driver: Input: 90-265V AC 50/60HZ. Output: 24V DC 5A 120W.
  • ✅Automatic protection for: Short circuit, overload, over voltage, over current, high temperature. Protection type: Hiccup mode, auto-recovery after fault condition is removed.
  • ✅This 24v power supply with 100% Waterproof IP67 protect for outdoor use. Aluminum alloy metal housing, easy for heat dissipation and ensure stability.
  • ✅Wide Range of LED power supply: Converts 110V AC to 24V DC, widely use for LED strip lights, LED light bulbs, Outdoor Light and other 24V DC LED lights(≤120W).
  • ✅High quality with 1 year warranty, and our seller support team always stand behind our products in any way, so please contact us for replacement if there is any quality proble.
Check Stock

MonsterQuest - Season Two

  • Plug & play. Easy to use,powered by USB port. No external driver and Power needed. Just plug it into your USB port and the DVD driver will be detected.
  • High speed. Compatible with USB3. 0 and backwards compatible with USB2. 0 , bringing faster data transmission speed (up to a maximum of 5Gbps) and stable performance with strong fault tolerance.
  • Intelligent tech. Designed with eject button so that you never have to worry about your disc getting stuck inside this external CD/DVD drive. The copper mesh technology of this external component, you can be rest assured of stable data transmission.
  • Trendy design. Brushed texture shell brings trendy sight and touch enjoyment. Embedded cable design, worry- off cable missing any when and where.
  • Wide compatibility. Ideal for various devices. It supports Windows XP/2003/Vista/7/8. 1/10, Linux, all version Mac OS system. For the desktops, Please connect the device to the back USB port of the motherboard for normal use.
Check Stock

LightingWill LED Driver 100 Watts Waterproof IP67 Power Supply Transformer, 90-265V AC to 12V DC Low Voltage Output, Adapter with 3-Prong Plug 3.3 Feet Cable for Outdoor Use, Computer Project

  • ✅The Model of LED Driver: Input: 90-265V AC 0.7A 50/60HZ. Output: 12V DC 8.5A 100W.
  • ✅Automatic protection for: short circuit, overload, over voltage, over current, high temperature. Protection type: Hiccup mode, auto-recovery after fault condition is removed.
  • ✅This 12v power supply with 100% Waterproof IP67 protect for outdoor use. Aluminum alloy metal housing, easy for heat dissipation and ensure stability.
  • ✅Wide Range of LED power supply: Converts 110V AC to 12V DC, widely use for LED strip lights, LED light bulbs, Outdoor Light and other 12V DC LED lights(≤100W).
  • ✅High quality with 1 year warranty, and our seller support team always stand behind our products in any way, so please contact us for replacement if there is any quality probl.
Check Stock