Best Motor Shaft Sleeve

Wexco 4R Wiper Motor - 4R1.12.R110D - 1.5" Shaft, 12 Volts, 3 spade wiring terminals

  • Durable Wiper Motor: the electric wiper motor is made using high quality materials. The heavy-duty construction assures longer durability in the harshest weather conditions and gives you an assurance of accelerating windshield wiper speed with ease, without causing any damage.
  • High Performance Wiper Part: features 2.5" Shaft, 2" Thread and 5" Drum. The WWF motors include self-contained wiper system with oscillating 1/2" drum pivot shaft, and provides adjustable park position from left to right.
  • DIY Wiper Motor Replacement: this genuine windshield motor is easy to install and comes with gears and cables for easy fitting. The motor ncludes 2-speed wiper switch for managing speeds of wiper blades. Easy to fit, the motor can be used for a wide variety of trucks, equipment, tractors, boats, buses..
  • Replacement Wiper Motor Use: Wexco motor for wipers helps to accelerate the performance of most types of wiper blades. The manual speed feature helps to control speeds based on cleaning requirements of windshields and provides manual adjustment of wiping angle for maximum range of cleaning, up to 110 degrees.
  • Salient Features: Wexco windscreen wiper motor comes with 2.5-inch shaft and the 12v wiper motor helps in hassle-free speed adjustment, from 40rpm to 60r....
Check Stock

Nutone Broan S90,HS90, MS90 Vent Fan Motor # 99080273 1500 RPM, 0.56 amps, 120V 60hz

  • 1 year manufacture warranty Nutone 99080484 BROAN-NUTONE Fan Motor For L250 Ventilator.
Check Stock

Bobrick 750-506 Steel Aircraft Recessed Hand Drayer Mounting Box, Baked Enamel Finish

  • Surface mounted hand dryer shall have a one-piece, cast-iron cover finished in high-gloss, acid-resistant, multicoat vitreous enamel.
  • Cover shall be equipped with a two-position, self-returning, chrome-plated, vandal-resistant air-outlet nozzle.
  • Motor shall be 1/10 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end.
  • Dryer shall turn off automatically when hands are removed or self-returning nozzle is released.
  • Unit shall be protected by a limited 10-year warranty on all parts except motor brushes.
Check Stock

HP Turbine, to fit A-dec/W&H 798/898

  • The installation is convenient and simple, and the shaft connector needs to be connected with an electric grinder. (There is no machine for this flexible shaft, please choose another machine).
  • The smooth metal surface of the drill shaft cable makes engraving, sanding and polishing easy and comfortable, especially suitable for long-term use.
  • 1/8 inch flexible chuck for inner cable of flexible shaft motor, suitable for Foredom Motors CC, SR, SRM, SRB, TX, TXM, TXB, LX, LM, LXB and Grobet, ProFlex flexible shaft motor.
  • There is no need to match the interface specifications of the electric grinder, as long as your electric grinder or electric drill can clamp the size of 3.175mm, you can connect the flexible shaft.
  • Flexible shaft adapter can be used with polishing kits, drill bits, wire brushes, countersinks, flap wheels, diamond setting and grinding wheels.
Check Stock

Bobrick - B-7120 - Trimline 208-240V Surface-Mount 22 ga Stainless Steel Hand Dryer

  • Unit shall be equipped with uniquely designed (patent pending) dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry.
  • Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end.
  • Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor.
  • Dryer shall turn off automatically when hands are removed.
  • Unit shall be protected by a limited 10 -year warranty on all parts except motor brushes.
Check Stock

CHANCS Small Synchronous Motor TYC-40 12V 5RPM AC Inner-Shaft Length 74mm for Christmas Santa Halloween decoration 2PCS

  • This is a TYC-40 AC 12V 6RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
  • 【Specification:】 Product Name : Synchronous Motor; Model : TYC-40; Speed: 5RPM; Shaft Diameter: 4.5mm ; Shaft Length: 74mm; Shaft Screw....
  • 【Application:】 Widely used in Christmas tree, decorative colored lights, hand-made, school project, electric fan shake heads, heaters, prayer....
  • 【Attention:】 The applicable voltage of this motor is AC 12V, USING DC POWER SUPPLY, THE MOTOR DOES NOT WORK!! And too high voltage will burn the....
  • 【Package Content:】2PCS x Synchronous Motor.
Check Stock

uxcell 6.35mm to 12mm Bore L31xD25 Flexible Coupling Jaw Coupler Shaft Joint for Servo Motor

  • Both the cylindrical inner diameter and the hexagon side length are 7 mm, support for any of the motor shaft diameters of 7mm/0.275in..
  • Coupler copper shaft coupling for the automotive tires DC motor robot, also suitable for cup turner, rod dryer, electric car toy, etc..
  • 8 pcs durable brass material 7mm length hexagon motor flexible coupling, you can use these for a long time..
  • Package Includes: 8 shaft motor flexible coupling coupler.
Check Stock

Dayton 2C647 Rectangular Permanent Split Capacitor OEM Specialty Blower

  • 115 CFM free air output-rated centrifugal blower for use in heating and ventilation appliances.
  • Sleeve bearing for blower motor shaft support.
  • 115V, 50/60Hz, 1.4 amps power input for multiple uses.
  • UL recognized and CSA certified for quality assurance.
Check Stock

DEWALT Die Grinder with No Lock-On, Brushless, Variable Speed, Paddle Switch, 2-Inch (DWE4997NVS)

  • Brushless motor for long motor life and no brush changes for the die grinder.
  • The electric die grinder features no-load speed of 7500 to 25000 RPM for speed range during all types of applications.
  • Spindle lock button of the DEWALT die grinder is made for quick accessory change.
  • Precision 1/4-inch collet with 1/8-inch reducing sleeve for gripping strength, allowing user to operate both 1/4-inch and 1/8-inch shaft accessories.
  • AC/DC capacity works off welding machines and generators for productivity and versatility.
Check Stock

CHANCS TYZ42 Synchronous Motor AC 12V 5r/min CW/CCW Shaft 35mm TYC40 Gear Motor for Fiber Optic Christmas Ornamen …

  • This is a TYC-40 AC 12V CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
  • 【Specification:】 Product Name : Synchronous Motor; Model : TYC-40; Shaft Diameter: 4.5mm ; Shaft Length: 35mm; Shaft Screw Thread Inner....
  • 【Application:】 Widely used in Christmas tree, decorative colored lights, hand-made, school project, electric fan shake heads, heaters, prayer....
  • 【Attention:】 The applicable voltage of this motor is AC 12V. USING DC POWER SUPPLY, THE MOTOR DOES NOT WORK!! And too high voltage will burn the....
  • 【Package Content:】1PC x Synchronous Motor;1PC X Screw ;1 PC X Wire Quick Connector.
Check Stock