Best Mould Engraver

Large Size Vintage Sports Car Chocolate Mold - MoldFun 3D Plastic Retro Roadster Mould for Cake Topper Decorating, Fondant, Candy, Plaster of Paris

  • Made of high quality PC material. the American FDA quality, innoxious, no peculiar smell, fadeless and easy to clean..
  • Great for making handmade chocolate, candy, jelly,cake decorating, etc. NOT suitable for microwave oven, toaster..
  • Shoe mould size: 10.2"( L ) X 4.1"(H)/25.8cm X 10.5cm..
  • Easy to wash and clean after use. This Mould is durable for long time use..
  • 2 Cavities per mould. Use clips to hold mould after pouring melted chocolate..
Check Stock

xTool D1 36w Higher Accuracy Laser Engraver with Material Box, 5w-7.5w Laser Cutter and Engraver Machine, Support LightBurn, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Paper(17'x15.98')

  • 【Finer Details by 0.08*0.08mm Ultra-fine Compression Spot】xTools D1 is the Best DIY laser cutter and engraver machine for beginners/business starter/ hobbyists/designers/home-makers/professionals. It adopts the latest high power 5-7.5W laser module with 0.08mm ultra-fine compressed spot, cutting speed up to 10000mm/min, can cut 8mm wood board and 3mm acrylic in one pass, directly engrave uncoated stainless steel.
  • 【Higher Accuracy Cutter and Engraver Machine】The all-steel wheel and shaft and synchronous belt enable motion accuracy of up to 0.01 mm and repeatable positioning accuracy of less than 0.02 mm, allowing the xTool D1 laser engraving machine to engrave and cut all details of design drawings 1-to-1 with high silence throughout. It maintains a perfect engraving effect even after long times use.
  • 【All in One Kit】These xTool D1 kit comes with the xTool D1 laser cutter and engraver machine, rotary attachment and laser material Box. With a rotary attachment, xTool D1 can engrave diameter cylinders as small as 3mm. The laser material box include 10 kinds of popular materials, including metal, wood, rubber, etc. You can start your creation quickly with xTool D1 Rotary attachment and Materail kit.
  • 【Wide Compatibility and Multiple Connection W....
Check Stock

ORTUR Laser Master 2 S2 LU2-2, 24V Laser Engraver Machine, 0.06mm Fixed-Focus Eye Protection Compressed Spot, 32-bit Motherboard, 5000mm/min Laser Engraving Area (390×410mm) for DIY Metal, Wood etc

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles..
  • ✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hun....
Check Stock

Lasers And Dots

  • DESKTOP CO2 LASER: Whether professional engraver or inspired DIYer, this K40 40W home laser engraver from OMTech will allow you to bring your ideas to life with greater speed and precision than ever before, cutting up to 1/8" through plywood or acrylic.
  • the advanced features of its intuitive digital control panel and bundled Windows-compatible editions of LaserDRW and WinsealXP will let you create and recreate even your most intricate designs perfectly.
  • VERSATILE 8x12 BED: The spacious 8x12 inch workbed provides 0.7 square feet of room to fit regular projects and gives you extra 2" height for thicker materials once the vented level board is removed.
  • the stabilizer clamp fixes irregularly shaped items securely in place for accurate engravings.
  • SAFE & EASY OPERATION: A digital laser power supply provides sure and easily monitored operation for your DC tube's expected 2000 hour life.
  • the wide viewing cover includes tinted eye protection.
  • a built-in exhaust fan quickly blows away smoke and dust for better ventilation to protect your laser lenses and reflective mirrors.
  • and a large E-stop is ready in case of emergencies.
  • FAST & FULLY ADJUSTABLE: This CO2 laser system marks wood, paper, plastics, leather, fabric, stone, and a wide range of other nonmetallic m....
Check Stock

Kaiser Inspiration Twister Bundt Cake Tin 25 cm Unusual Spiral Cast Aluminium Non-Stick

  • Contents: 1 x Guglhupf baking mould with extraordinary spiral design (diameter 25 cm, height 10.5 cm) including recipe book – item number:....
  • Material: cast aluminium non-stick Ceramic non-stick coating - oven-safe, leak-proof, heat-resistant up to 230°C. Ideal shape also as a pudding mould.
  • Bundt cake mould in modern format: spiral design with refined facets. In the mould with the fireplace like opening, the dough is baked evenly in the....
  • Easy to remove the finished baked cake and easy to clean thanks to the very good ceramic non-stick coating. Even tanning thanks to optimal heat....
  • Manufacturer's guarantee: 3 years non-stick coating. The warranty conditions can be found under "Further technical information". Your statutory....
Check Stock

Maple Leaf Paving Mould Path Maker Mold DIY Garden Cobblestone Mold DIY Plastic Cobblestone Concrete Stepping Stone Mould Walk Way Maker

  • Practical gardening tools: DIY walk maker concrete garden molds will help you decorate your backyard landscape.
  • Suitable: Concrete molds’ smooth surface, easy to remove, is very suitable for laying terraces, paths, courtyards, sidewalks, etc.
  • DIY plastic moulded paving mould: personalized brick mould makes the path more exotic, creating your own garden path style.
  • Easy to use: no special skills are required, even inexperienced people can use maple leaf paving mould to create beautiful paths.
  • Reusable: Path maker mould can be reused to make courtyards, terraces and paths to decorate your backyard landscape.
Check Stock

Dremel 9929 Rotary Tool Engraver Bit with Diamond Point- Perfect for Engraving Metal, Glass, and Wood, Grey , Gray

  • Engrave, decorate, or personalize a wide variety of materials - from metal to plastic to wood and leather using the Dremel 290 Engraver.
  • Dremel 9929 Diamond Point accessory is for use with the 290 Engraver and is ideal for decorative engraving and personalization on hard surfaces.
  • 9929 Diamond Point works best on steel, chrome, titanium, granite, and other hard substrates.
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock

MoldFun 3D Men s Leather Shoe Chocolate Mold 8.5 L X 3.9 H Men Polycarbonate Plastic Mould for Fondant Candy Cake Decorating Home Baking Sugar Craft Accessories

  • Made of high quality PC material, easy to clean..
  • Great for making handmade chocolate, candy, jelly, cake decorating, etc. Professional chocolate tools. NOT suitable for microwave oven, toaster..
  • Shoe mould size: 8.5"( L ) X 3.9"(H)/21.5cm X 10cm..
  • Easy to wash and clean after use. This Mould is durable for long time use..
  • 2 Cavities per mould. Use clips to hold mould after pouring melted chocolate..
Check Stock

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

  • Double Compression Spot Coupling Technology: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
  • Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
  • Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
  • The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, supp....
Check Stock

xTool D1 Laser Engraver, 5W Ultra Accurate Laser Engraving Machine, 36W DIY Laser Cutter Support LightBurn, Laser Engraver for Wood and Metal, 17'' x 16''

  • ...lity of the machine to cut and 36W is the machine power of the laser machine.
  • Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.08mm ultra-fine compression spot, resulting in detailed and vivid engraving images.
  • All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 Laser engraver more stable with less noise and 3 lifetimes longer than similar products.
  • Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 6mm wood board and a 3mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
  • Wide Compatibility - xTool D1 supports LightBurn and Laserbox Basic (available on mobile devices). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
  • Make Your Creativity a Breeze - xTool D1 5W is the ideal and user-friendly laser engraver for beginners to start off with, like making greeting cards, patterns-engraving, and your personal artwork.
  • Eye Protection Design - The anti-UV filter acrylic on the laser module filters 97% of UV rays to protect your eyes and those around you.
  • Professional Support - We have a professional US technical team and support website to solve all your problems within 24 hours.
Check Stock