Best Mounting Bushing

Prime-Line F 2612 Sliding Window Sash Lock, Right and Left Hand, Chrome Diecast

  • Used on either horizontal or vertical sliding windows.
  • Can be used on camper shell or RV type windows.
  • Includes nylon mounting bushing for easy turning.
Check Stock

TB Woods Type QT QT22MM Sure-Grip Bushing, 22 mm Bore, 1.625\ OD, 1.25\ Length, 1750 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 1,750 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Steel for greater strength and shock resistance than cast iron.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock

TB Woods Type QT QT14MM Sure-Grip Bushing, 14 mm Bore, 1.625\ OD, 1.25\ Length, 1750 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 1,750 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Steel for greater strength and shock resistance than cast iron.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock

TB Woods Type QT QT15/16 Sure-Grip Bushing, Inch, 0.9375\ Bore, 1.625\ OD, 1.25\ Length, 1750 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 1,750 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Steel for greater strength and shock resistance than cast iron.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock

Shindaiwa 78890-30000 Speed-Feed 400 Universal Bump Feed Trimmer Head

  • Please verifying your engine's model and part numbers to make sure that you receive the right parts and get your engine up and running smoothly..
  • Replaces Shindaiwa 78890-18000, 78890-18001, 78890-11000, 78890-30000, (For Echo, You may need to order Shield part number C550000032).
  • Fit most 78890-11000 Speed-Feed 375 Head,78890-30000 Speed-Feed 400 Head,78890-30000B Speed-Feed 400 Head.
  • The trimmer head is designed to quickly and efficiently cut through the grass..
  • Used on Shiandaiwa 22T, C230, C242, C2510, T195s, T220, T222,T230, T231, T230s, T242, C242, T242X, T2510, C2510, T2510X Trimmer,Thread LH trimmer head counterclockwise on to mounting stud or output shaft..
  • Mounting Studs Size:7mm x 10mm (LH) Mounting Stud.You will get: 1 trimmer head, 1 mounting stud, warranty is 3 month for any quality issue. Please identify the bushing and mounting stud combination needed for your model..
Check Stock

TB Woods Type JA JAM14MM Sure-Grip Bushing, Metric, 14 mm Bore, 34.9 mm OD, 25.4 mm Length, 198 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 198 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock

TB Woods Type SH SH118 Sure-Grip Bushing, Cast Iron, Inch, 1.125\ Bore, 1.871\ OD, 1.25\ Length, 3500 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 3,500 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Kluson 3+3 Locking Revolution Series G-Mount Tuners, Gold (KRGL-3-GP)

  • A Drop-in Locking Tuner Upgrade For Your Gibson-style Guitar.
  • These State Of The Art Tuning Machines Are Designed To Directly Retrofit Diecast Tuning Machines With A Hex Head Bushing And Adding A Rear Knob Locking Mechanism, Traditional Kluson Two-screw Mounting Pattern And Modern 25/64" Peghole..
  • Perfect Blend of Classic Looks with Modern Features.
  • Set Of 6 Includes All Mounting Hardware (MPN KRGL-3-GP) SM #5139-G.
Check Stock

Kluson 3+3 Locking Revolution Series G-Mount Tuners, Chrome (KRGL-3-CP)

  • A Drop-in Locking Tuner Upgrade For Your Gibson-style Guitar.
  • These State Of The Art Tuning Machines Are Designed To Directly Retrofit Diecast Tuning Machines With A Hex Head Bushing And Adding A Rear Knob Locking Mechanism, Traditional Kluson Two-screw Mounting Pattern And Modern 25/64" Peghole..
  • Perfect Blend of Classic Looks with Modern Features.
  • Set Of 6 Includes All Mounting Hardware (MPN KRGL-3-CP) SM #5139-C.
Check Stock

Panari Trimmer Head for Echo Weed Eater SRM225 SRM211 PAS210 PAS211 PAS225 PAS230 PAS231 PAS260 PAS265 Speed Feed 400 SRM Series Straight Shaft Bump Head

  • Replaces Speed feed 400 , Fits most Echo, Honda, Husqvarna, Maruyama, RedMax, Shindaiwa, Stihl string trimmers.(For Straight Shaft Model Trimmers, NOT for Curved Shaft Trimmer).
  • Part number # 99944200907 99944200902 ,replaces 78890-30000 ,78890-11000, 78890-18001 (For Echo, You may need to order Shield p/n C550000032) and 78890-18000..
  • Used on ECHO SRM210SB SRM211 SRM211SB SRM225 SRM225SB SRM260SB SRM261SB SRM2100SB SRM2400SB string trimmer.
  • Used on ECHO SRM210SB SRM211 SRM211SB SRM225 SRM225SB SRM260SB SRM261SB SRM2100SB SRM2400SB string trimmer-10mm x 1.25 LH Long Bushing (Silver).
  • Used on ECHO PAS210 PAS211 PAS225 PAS225VP PAS225VPB PAS230 PAS231 PAS260 PAS261 PAS265 PAS266 PAS280 PAS2100 PAS2400 PAS2601 power source attachment..
  • Used on Shindaiwa 22T, C230, C242, C2510, T195s, T220, T222,T230, T231, T230s, T242, C242, T242X, T2510_C2510, T2510X--（7mm x 10mm (LH) Mounting Stud (Gold)）BP35, B45, B450, C350-8mm x 10mm (LH) Mounting Stud.
  • T235, T344, C344, T254, C254-10mm x 1.25 LH Long Bushing,.
Check Stock