Timbrecod DC-56 5.5 inch Touch Screen DSLR Camera Field Monitor Small Full HD 1920×1080 IPS 4K HDMI Input Output Waveform 3D LUT with Built-in 3500mAh Rechargeable Battery and Tilt Arm
...touching.Excellent sensitivity capacitive technology and multi-touch capability allows you to swipe, scroll, select, zoom in, zoom out.Say goodbye to complicated button control!.
【4K HDMI Input/Output】DC-56 has 4K HDMI input/output:3840x2160p (30/25/24Hz), 4096X2160p (24Hz).The monitor not only display live signals, but also send them out to other monitors simultaneously.4K HDMI ports guarantee high definition and fast signal transmissions. The 3.5mm heaphone jack is designed for you to monitor the audio in real time..
【Built-in Battery】 The Built-in 7.4V 3500mah lithium battery of the camera field monitor can work continuously for 3-4 hours, and the power supply can be checked in real-time on the screen, which is convenient for outdoor work..
【360° Adjustable Tilt Arm】The metal hot shoe adapter support 90° rotation and the 360° rotation of Tilt Arm allows photographer to make quick, smooth monitor adjustments and fulfill the different angles need in the real shooting process..
Bindpo RF Logarithmic Detector, 1M-10000MHz AD8317 Radio Frequency Logarithmic Detector Power Meter, for RF Signal Power Detection/Radio Frequency Signal Detection
The product is designed by using AD8317 chip, and is used for RF signal power detection..
Can detect power in -55dBm to -0dBm of an RF signal, so that the RF signal is converted to DC voltage output..
The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, thus expanding the dynamic range of the detected signal, which ranges reach 55dB..
It can be widely used in radio frequency signal detection, signal power measurement, environmental field strength detection..
It can also be used as part of automatic gain control and automatic level control..
Phono Turntable Preamp, Moukey Stereo Mini Preamplifier,RCA Input, RCA Output for Vinyl Record Player, Low Noise,Independent Knob Control Operation, with DC 5V Adapter-MPAMP1
【 Low Noise Operation】Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. Hooking up the preamp to the turntable and audio device(for example, power amplifier), and then connect the power amplifier to the speaker, you can enjoy better sound and less distortion..
【Converts Phono Signals】Turntable preamplifier, which can convert sound signal into line level signal, this advanced circuit sound preamplifier, input sensitivity electromagnetic pickup..
【DC 5V Power Supply】This product uses the latest DC 5V power supply mode, so no longer restricts the application scenarios. Note: Please use an external power supply with CE or UL certification, and stay away from the interference source, otherwise it will cause noise and other undesirable interference to the product..
【Double Gain】Considering that the signal of the phonograph is relatively weak, our company has added a set of gain adjustments for the input and output, so that the sound volume of the phonograph can be perfectly played. NOTE: This product must be used together with a power amplifier..
0-10V Signal Isolation Module, S-10V10V Analog Quantities Voltage Signal Isolation Module for PLC/MCU Isolating High Voltage or Current (Voltage) Signals
➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..
15V 2A 1.5A Switching Power Supply UL Listed 30W Universal Power Cord 10 Multi Jacks Adaptor Replacement Regulated 15.0V AC/DC Adapter 15V 2000mA 1500mA 1300mA Charger Transformer Plug
UL LISTED 15V 2A 1A Power Cord, Energy Efficiency VI, Regulated 15V Power Adapter Tested & Approved and Certified by UL, Replacement Power cord build....
DC 30W Switching Power Supply, 15 Volt 2A max, Power supply works for various of devices which ask for a less than 15V 2A 30W power adaptor, Such as....
DC Polarity: Inner positive(+), Outter negative(-), Input AC 100-240V - 50/60Hz 0.3A, Worldwide input voltage range, US standand wall plug, 6.0ft/1.8M....
Multi Tips - Selected 10pcs various popular connectors which can be used for most of your 15V DC devices, DC Jack Dimensions: 6.3*3.0, 5.5*2.1,....
What You Get: 1 x 15V 2A max AC/DC class 2 universal power adapter, 10 x Multi DC jacks, 30 days refund, 12 months exchange.
Bejav 24v 12v to USB 5v Step Down Converter 12v USB Charger Multi Port Adapter Compatible with iPhone Samsung USB Device Smart Phone Tablets Charging
12v USB charger multi port adapter supports input DC voltage 8V-30V, suitable for 12V-24V car battery/lead acid battery/lithium ion battery..
12v to USB converter output voltage of 5V, power up to 60W, there are 5 output ports (3 USB-A and 2 USB-C), each port supports 2.4A current, can be fast charging for iphone and other devices..
12v to 5v step down converter with 2W small power LED lighting, very energy efficient, can also be turned on SOS flashing light mode, in need of assistance in an emergency can be issued a distress signal light..
12v to usb adapter input cable length of 3.6 feet, battery clamps for large (80mm) specifications, iron clamps surface copper plating treatment..
12v to 5v converter has perfect circuit safety protection measures, with positive and negative reverse connection protection and 10A current overload protection at the input, and PTC short circuit protection at each output port..
12 volt to usb adapter button can control the lighting, it has two grades of strong and low light, when the button is continuously held down for 3 seconds can enter the SOS flashing mode..
KOOBOOK 1Set 1Hz-50MHz Frequency Counter Meter Crystal Oscillator Digital Tester Meter DIY Kit 5-Digital LED Display
This is a PIC microcontroller based on the frequency meter, with a crystal measurement function and programmable addition and subtraction frequency settings..
Five digital display, easy and intuitive, all use of in-line components, the circuit is simple and easy to produce..
You need to solder and assemble by yourself, all the components are directly inserted, and the wire is printed correctly according to the PCB. After welding, the signal is input with the standard signal source, and the yellow adjustable capacitor is adjusted to make the display value equal to the signal frequency..
The power supply can use a USB to 3.5mm power cable, or you can directly input a 5-9V DC power supply at the - and + pads..
It can measure the frequency range from 1 Hz to 50 megahertz (1Hz-50MHz), can measure the oscillation frequency of most common crystal oscillators, and measure equipment such as radio transceivers..
