Best Multi bit Set

NEIKO 03044A 1/4-Inch Drive Mini Ratchet Screwdriver Set, 8 Pc, Cr-V Steel, Tight Reach, 90 Degree Screwdriver, Low Profile, Close Quarter, Right Angle Offset, Short Phillips, Slotted, Torx Star

  • TIGHT REACH RATCHET: Unique mini-size low profile ratchet driver handle is only 3/8” thick and 4” long, making it perfect for tight and awkward spaces..
  • REVERSIBLE BIT DRIVER: Quick reverse thumb lever and a 16-teeth reversible ratcheting mechanism delivers smooth fastening and unfastening in both directions..
  • BIT RATCHET: All bits are constructed of chrome vanadium steel bits for extra strong durability and resistance to tool wear-out..
  • RIGHT ANGLE SCREWDRIVER: This multi screwdriver has a magnetic like clip that holds the bit securely and provides enough torque, so the bit does not fall out during use. Universal with any 1/4-inch hex shank bit..
  • MINI RATCHET SET INCLUDES: Ratchet screwdriver set comes with (7) 1-inch bits in an organizer: (3) Phillips (#1, #2 and #3), (2) Slotted (4.5mm and 7mm), and (2) Torx star (T15 and T20) and 1 Ratchet.
Check Stock

SEDY 23pc 1/4\ Mini Ratchet Wrench Close Quarters Screwdriver and Bits Set, S2 Multi Hex Bits Set with Ultra Low Profile 1/4-Inch 90 Degree High Torque Mini Offset Reversible Drive Handle

  • ... lateral surface, etc. Traditional ratcheting screwdriver or stubby screwdriver might be too large or bulky to fit, but this set of product is rendering easy fastening and unfastening with sufficient torque..
  • DELICATE MECHANISM - The 36-teeth reversible ratchet system made of chrome vanadium steel is adopted in this multi pointed right angle combination screwdriver set, which can ensure the smooth rotation of the bidirectional ratchet and make more accurate adjustment than the 12-teeth one. You can adjust the direction by simply dialing the spin button buring use..
  • MAGNETIC BIT ADAPTOR - The magnetic bit adaptor ensures that any 1/4" hex bit can be firmly secured for higher torque. The miniature pocket size close-quarters bit driver has magnetic like clip inside the hex bit holder help keep the inserted bit tight in position and no falling. This set performs well in confined locations on machines, cars, boats, plane, RV, etc, or for household or work with “tight fit” repairs, installations or renovations..
  • EXTRA 22 POPULAR-SIZE S2 steel (HRC 60°) BITS: ▲4 Pieces-Phillips Bit (#0, #1, #2, #3).
  • ▲4 Pieces-Slotted Bits (3mm, 4mm, 5mm and 6mm).
  • ▲7 Pieces-Torx Star Bits (T7, T8, T9, T10, T15, T20, T25).
  • ▲6 Pieces-Hex Bits (H2, H2.5, H3, H4, H5, H....
Check Stock

ACETOP 6 Pcs Combination Tap Drill Bit HSS Titanium Coated 3-in-1 Metric Hex Speed Drill Thread Tap Set Spiral Screw Tapping Bit Tool for Drilling Tapping Countersinking, M3 M4 M5 M6 M8 M10, Gold

  • [Specifications and packaging]: 6 pcs multi-function drill tap bits.Include size: 6-32NC, 8-32NC ,10-32NC, 10-24NC, 12-24NC, 1/4-20NC..
  • [Fitment]: Hex shank tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
  • [Material]: Drill tap bit set is a classic high speed steel structure + titanium coating..
  • [Advantage]: Combination titanium drill bit 1/4 inch hex shank fits into power tools more easily and securely..
  • [Quick Replacement, One-Click Drilling]: Thread drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
Check Stock

Belle nail tools

  • ...ssional shapes and sizes meet the diversified needs.
  • 5PCS CERAMIC DRILL BIT FOR NAILS - The ceramic has excellent heat dissipation, hard-wearing, durable, and sharper than carbide drill bits, you could sharpen, grind, neaten, carve, smoothen, polish, and reshape gel and acrylic nails very efficiently and time saving.
  • MULTI-FUNCTION MANICURE DRILL BITS - The nail bits for acrylic nails work well in carving, grinding, sanding, polishing and so on, suitable for natural nails and almost all gel nails, and are easy to get started for learners at all stages.
Check Stock

GreatNeck SD11RC 11 in 1 Screwdriver and Nut Driver Set Multi-Bit Cushion Grip Multi Tool Screwdriver Kit HVAC tools Electrician Tools

  • 11-IN-1 SCREW DRIVER SET: features the star tips, Phillips screwdriver bits, flat head screwdriver bits, and square-tip bits used most often by....
  • THOUGHTFULLY DESIGNED: All in one screwdriver features interchangeable shafts for quick bit storage.
  • Superior socket design for secure bit fit.
  • INCLUDES THESE BITS: Slotted or flathead screwdrivers bits (3/16", 1/4"), Phillips head screwdriver bits (#1, #2), Square drive bits (#1, #2), and....
  • DOUBLES AS A NUT DRIVER: Multi screwdriver’s shaft converts to nut driver sizes: 1/4", 5/16" and 3/8".
  • MULTIPURPOSE TOOL: 11 Nut and Screw drivers in one tool. If you're looking for a multibit screwdriver with the most common torx, square bit, slotted,....
Check Stock

Klein Tools 32510 Magnetic Multibit Screwdriver with Sturdy Torx, Hex, Spanner, Tri-Wing, Torq and Nut Tamperproof Bits and Storage Block

  • Multi-bit screwdriver / nut driver with sturdy bit and screw holding magnet that allows for screws to fit securely in place for easy use.
  • Includes complete tamperproof bit set in storage block.
  • TORX bits included: T7, T8, T10, T15, T20, T25, T27, T30 and T40. TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Includes 3/32-Inch, 7/64-Inch, 1/8-Inch, 9/64-Inch, 5/32-Inch and 3/16-Inch Fraction Hex bits.
  • Includes 2, 2.5, 3, 4 and 5 mm metric hex bits.
Check Stock

DURATECH 4 PCS Extra Long Needle Nose Pliers Set with Stubby Ratcheting Screwdriver, 12-in-1 Multi-bit Short Screw Drivers

  • ...ld and pull tiny fasteners. Diagonal pliers for cutting wires, It is tough enough to cut steel wire with a diameter of 2 mm..
  • [High quality material] 12 in 1 stubby ratcheting screwdriver comes with 6 pc bits,including phillips, slotted, torx screw driver bits,PH1 / PH3,5 / 3 ,3/16 / 1/4,T20 / T25,PH2 / 4,T10 / T15, multi bits are made of high quality S2 alloy steel with nickel plating surface, high hardness, strong torque, corrosion resistance and beautiful appearance..
  • [Perfect design] This multi-bit small ratchet screwdriver with quick-load mechanism, automatic locking function, strong torque, one-handed switchable bits, internal structure of bit driver with 3 ball bearing lock mechanism, can quickly clamp the bits and prevent them from slipping off..
Check Stock

JIG IT Shelving Jig and 1/4 Bit Set

  • Drill Jig For Straight Holes: Get perfectly, consistently spaced, and centered shelf-pin holes with our shelf pin jig drill guide set! This shelf jigs....
  • Includes Two Storage Compartments: The re-designed drill jig handle includes two storage compartments for self-centering bits! Additional....
  • Using Multi-Position Drilling Template: Our cabinet handle jig determine the setback required for your project: 2-1/2'' (64mm) or 1-7/16'' (37mm).....
  • Self-Centering Drill Bits: Self centering drill bits are pre-set to bore a consistent depth for perfect fitting shelf pins and sleeves every time. No....
  • What’s Included In This Portable Drill Guide: This drill guide for straight holes kit includes (1) JIG IT Cabinet Door Handle Jig, (1)....
Check Stock

OEM TOOLS 22588 13-in-1 Multi-Bit Screwdriver, Nut Driver and Schrader Valve Tool, Multi Tool Screwdriver Kit, HVAC tools, Electrician Tools

  • 13-IN-1 SCREW DRIVER SET: features the star tips, Phillips screwdriver bits, slotted or flathead screwdriver bits, and square tip bits used most often by Electricians and HVAC technicians, as well as an AC Schrader valve removal tool.
  • THOUGHTFULLY DESIGNED: All in one screwdriver features interchangeable shafts for quick bit storage, and, and the multi screwdriver's shafts become three common nut driver sizes.
  • Superior socket design for secure bit fit.
  • INCLUDES THESE BITS: Slotted or flathead screwdrivers bits (3/16.
Check Stock

DURATECH Multi-bit Ratcheting Screwdriver, 38-Piece Magnetic Screw Drivers with Bits Storage Handle, Slotted/Philips/Pozi/Torx/Hex/Square

  • This multi-bit screwdriver set allows for one-handed driving with one tool in 36 sizes.Excellent all-in-one hand tool for home repairs.
  • Internal Magnetic Device- The stainless steel bit holder has an internal magnetic device that provides strong magnetism to tighten the bit, and the magnetically-conducted bit can pick up loose screws and collect metal debris..
  • The screwdriver blade can be removed to adjust the length of the screwdriver to easily access tight areas for ease of use.
  • 3-Mode Ratchet Mechanism- All-metal, high-torque ratchet collar provides greater durability and faster drive speeds. Ratchet direction can be set to forward, fixed and reverse for easy operation..
  • The handle can store 5pc bits for easy access.
  • the curved handle provides excellent torque and maximum comfort..
Check Stock