Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP
42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP
20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....
PVC Cutter Ratcheting Hose Cutter Cuts up to 2-1/2' Pipe Capacity Cutting Tool，One-hand Fast Pipe Cutting Tool，Ideal for Home Working and Plumbers
Efficient Working - Durable Aluminum Construction and 4.0 Thick Manganese Steel Blade for Long Lasting. The pipe cutter equipped with rubber non-slip handle.Ergonomic Grips on Bottom Handle, Delivers Fast and Easy Single Stroke Cuts, Faster Positioning,Soft rubber handle is more comfortable to use..
Maximum Scope of Cut - The maximum opening of the pvc cutter(63mm), Cuts Up to 2-1/2" outer diameter capacity--Can not make a square cut..
Ratchet design - Pipe Tubing Cutter Adopts ratchet drive technology and arch angle design to greatly save your strength. and only one hand can complete the cutting operation smoothly. improve work efficiency by fast cutting..
The triangle design - The triangle design at the edge of the knife allows better access to the pipe.Special structure design,and allows you to cut pipes by a few presses..
Wide Application - PVC cutters are suitable for plumbers, home repairs, garden repairs, car repairs and pipeline repairs.The cutter is commonly used for cutting most kinds of plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multilayer tubing..
6Pack PVC Fittings 1-1/2Inch 5 Way, Furniture Grade PVC Elbow Fittings for 1-1/2Inch PVC Pipe, PVC Pipe Fitting Connector for Build PVC Structures Garden Enclosures Dog Agility Jumps Greenhouse
PVC Fittings for SCH40 1 1/2 Inch PVC Pipe: The 1-1/2 inch PVC fittings are perfectly suited for 1-1/2" Sch. 40 PVC pipe.
The 1-1/2 elbow fittings have an inside diameter of 1-7/8 inches.
Please Notes: PVC pipe sizes are named by measuring the inside diameter of the PVC pipe, as 1-1/2" PVC pipe has an inside diameter of 1-1/2" and an outside diameter of 1-7/8".
Furniture Grade 5 Way PVC Conner: 5-way PVC elbow is made of furniture grade PVC with solid PVC material thickness, super thick and heavy duty, widely used in indoor and outdoor DIY PVC structures, such as building greenhouse for vegetable garden and making agility equipment for dogs.
Professional Grade PVC Pipe Fitting: PVC fittings have a bright white finish and sturdy material that will last for years without yellowing and resist low temperatures and shocks.
tapered ends and extra-deep fitting sockets ensure smooth and stable PVC pipe connections.
PVC Connectors for Homemade Projects: PVC fittings 1-1/2 inch are widely used to build heavy duty items, such as patio furniture, 9 square in the air, building PVC pet structures, garden cage frames, homemade PVC shelves, making outdoor plant stand and PVC blanket forts.
Building Anything with PVC Fittings: 5 Way PVC fittings connect five pipe section....
RIDGID 23498 Model RC-1625 Aluminum Ratchet Action 1/8\ to 1-5/8\ Plastic Pipe And Tubing Cutter, Silver
PLASTIC PIPE CUTTER: Makes clean and precise cuts to the length needed on a variety of plastic and multilayer tubing with outer diameters of 1/8 in. to 1-5/8 in. including PVC, CPVC, PP, PEX, PE, and rubber hose.
BUILT TO SAVE LABOR: Ratcheting mechanism combined with the innovative blade design work together to reduce the amount of hand force needed to cut through even the toughest of plastic materials.
EFFICIENT AND CONVENIENT: "Burr-less" cutting operation provides a clean square cut while the ergonomic grips on the bottom handle are spaced at 1/2-in. increments for a quick pipe measuring scale.
SIMPLE BLADE CHANGING: X-CEL quick change blade system allows for easy blade changes within seconds without any tools needed and no worries of lost clips or misplaced screws.
DURABLE CONSTRUCTION: High-quality aluminum build provides long-lasting durability for a long service life that can withstand heavy-duty and daily use.
FEATURE: Structural PVC Elbow Fitting has tapered edges and glossy surface, nice for display items such as DIY furnitures..
PVC CONNECTORS: 3 Way and 4 Way Heavy Duty PVC Pipe Elbow Fitting Kit, ideal for edge, corner and center connections, resistant to frost and corrosion, long service life..
MATERIAL: High quality SCH 40 PVC Fittings, can withstand impacts or drop from a substantial height, and won’t suffer any cracks or breakage..
SIZE: Fit 1/2 inch PVC pipe, PVC Connector for Center Connections, white finish with tapered sockets for a professional design..
APPLICATION: Furniture-Grade Parts, suitable for build shelves, pool products, chairs, desks, storage frames, garden support structure etc..
PVC Pipe Reamer with 1-½-Inch Head Aluminum, PVC Fitting Saver, PVC Socket Saver with 0.315″ Hex Shaft, For Water Lines, Drain Lines, Vent Lines
Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness..
Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It is works great for Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe..
Compatibility: PVC fitting saver come with 0.315″ hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work..
Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90 degrees for new cutting surface before use, the cutting efficiency is higher and faster..
Note: It is recommended to use a variable-speed electric drill with low-speed cutting.
Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending..
