Reboot Welding Electrode Holder 300AMP Copper Heavy Duty Jaw Holding Plier Electrode Clamp of Welding Machine ARC Welder American Design
Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity..
Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc..
Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet.
100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance..
GZ GUOZHI Welding Machine Handheld, 110V Portable ARC Welder Hand Held Welder Machine, 130Amp Digital Display IGBT Inverter with Welding Tool Set
...【Best Choice for Beginner】: Handheld ARC welder with built-in current digital display show 20-130, and built-in hot start function, quick arc starting, Easy work with new welders or users..
【Advanced Technology】: This welder ideal for E6011, E6013, E6014, E7018 and welding rods below 1/8 inch. It can weld 10 electrodes in a row without protection, with high duty cycle..
【Dual-Voltage & High-Quality Accessories】: 20A-120A adjustable current, 90V-140V wide-voltage design, unafraid of the voltage fluctuations. Included: toolbox, 10-feet 500A Work Clamp Assembly, high quality auto darkening welding glasses, welding gloves, 5 pieces of electrode 3/32 inch, etc. The use of high-quality accessories, durable and not easy to damage..
PRODUCT: premium shielded manual metal arc-welding (SMAW) electrode E6013 for stick welding carbon steel welding in metal fabrication, maintenance and repair works..
SPECIFICATION: AWS A5.1 ASME SFA 5.1/E6013. 60,000 psi min. yield strength. Core rod diameters and electrode lengths: 1/8" x 14" and 3/32" x 12". Typical deposited chemical composition (wt%): C=0.08, Mn=0.50, Si=0.40, P=0.015, S=0.012, Fe-balance..
FEATURES AND APPLICATIONS: Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. Light to medium penetrating. Easy steady arc with excellent wetting and ease of operation. Smooth and flat beads with low spatter. Easy slag removal. For sheet metal, irregular short welds that change positions. Good for general, all-purpose applications and joints with poor fit-up. All-position welding..
PACKAGE: pack of 5-lb and 10-lb. With volume discount. Buy More Save More!.
U.S. based welding supplier. Strong technical support with experienced customer service to address buyer's any question..
Weldpro Omni 210 Dual Voltage 115V/230V AC/DC Multi-Process Welder - MIG/Flux Core/Stick/ACDC High Frequency TIG with Pulser and Aluminum Balance/Frequency Control 3 year warranty welding machine
Weldpro’s new 200 Amp Multiprocess welder now includes AC/DC TIG Welding with Hi Frequency Start and Pulse Control.MIG/Stick/ AC&DC TIG/ Flux Core/ Aluminum Spool Gun all new design with FOOTPEDAL and TRIGGER SWITCH..
Dual Gas inputs for dedicated Argon and MIX/CO2 tanks. MIG gun and TIG torch can be connected simultaneously for ease of switching between MIG and TIG.All new easy to use, multifunction data display and controls that make changing welding processes and parameters simple even for beginners..
200A Welding Current across ALL PROCESSES allows welding of various thickness material and different types of base material..
Included VRD feature with Hi Temp and Overload protection with indicator. User adjustable inductance.Operates off 115V/230V standard household current.
What’s Included: 10ft NT1 MIG gun, 12ft CK 17-12-RSF Flex head TIG torch, 5AWG 10ft 200A electrode holder, 5AWG 10ft 300A T-shape earth clamp CGA 580 gas flow meter with 4.5ft gas hose, Power adapter, 0.030’’-0.035’’ knurled drive roll, 0.024’’-0.035’’V-Groove drive roll, AK-3 accessory kit, Weldpro CK17 torch protection cover, Trigger button for TIG torch, Weldpro SSC control foot pedal.
3 Year Warranty, 100 Day, 100% Satisfaction Guarantee.
ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control.
power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation.
Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls., 17v Tig Torch and Electrode holder.
Spool Gun Ready to MIG Aluminum with optional Spool Gun.
S7 200Amp MIG Welder,110V&220V 3 in 1 MIG&ARC&Lift TIG Gas/Gasless Inverter Multi-Process Dual Voltage Welding Machine
️★Multi-Functions In One Machine: IGBT Full 30-200Amp(Max)With Digital Display, Reliable Quality And Stable Performance.Suitable For MMA, Lift TIG, Flux MIG, Gas MIG,Big Enough To Handle 2 To 10 Pound Rolls Of Wire.
️★110V/220V Powerful Machine: Up To 200A Output Current That Can Weld Mild Up To 5/32 Inch (4.0mm) Plate.MAX 5KG Rolls Of Wire.030"(0.8mm) With Solid Core Wire, And .035" (0.9mm)With Flux Core Wire.Can Handle E7018 Basic Electrode.
️★Synergic Control,Automatic Change Of The Voltage & Wire Feeding Speed By Adjusting The Amperage Or Choosing Different Thicknesses.The MIG-200is Capable Of True lift TIG(Need Buy Extra Tig Lift Torch,Not Included Inside Product) Welding As Well As Stick Welding ,The MIG-200 Is An Intuitive Synergically Designed MIG/MAG/ Flux Core/ARC/Lift TIG Welding Machine Safety, Automatic Protection Function For Over-Current, Over-Voltage And Over-Heating.
3 Year Warranty, 100 Day, 100% Satisfaction Guarantee.
ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control.
power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation.
Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls., 17v Tig Torch and Electrode holder.
Spool Gun Ready to MIG Aluminum with optional Spool Gun.
Amico ARC-200, 5-200 Amp Stick Arc Lift-TIG Combo Welder, 100-250V Wide Voltage Welding, 80% Duty Cycle, Compatible with all Electrodes: E6010 E6011 E6013 E7014 E7018 etc.
ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function.
5-200A comfortably welds thin stainless steel and other various metals..
Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs..
Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length..
ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection..
TOOLIOM 195A Stick Welder 110/220V Dual Voltage MMA Welder Digital Display IGBT Inverter Hot Start Arc Force Anti-Stick Welding Machine fits 5/32in. (4mm) Welding Rods
Can handle E6010 cellulose electrode, ideal for below 5/32 in.(4.0mm) welding rods.Up to 195A, applicable of welding mild steel, carbon steel, stainless steel and cast iron..
Built in Hot-start make the arc strik easier, Anti-stick can remove the electrode from the workpiece easily, Arc-force provide smoother welding and deeper penetration..
Equipped with multiple protection functions,such as over current protection, over load protection,temperature control..
Easy to operate for beginner , can read the output welding current with smart digital display..
Comes with a easy carrying handle easy for carry, can be used anywhere you need..
WYNNsky Magnetic Welding Support Ground Clamp, 2pcs Set, Single and Double Welding Head, Copper Tail
Design: This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Super suction magnet at the bottom, large suction power, long-lasting magnetism..
Application: This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
Material: The welding magnet head adopts high quality material, durable and solid. Has brass tail has good welding stability, durable, anti-rust, has good performance and long service life..
Advantage: This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
Including 1pc Single Head Magnetic Welding Ground Clamp.
