EATON RF9642-ZDW Z-Wave Plus Accessory Dimmer, White
Compatible Z-Wave controller/hub required.
Z-Wave Plus devices can be controlled through voice assistants such as Amazon Alexa or Google Home when used with compatible Z-Wave controller/hub.
Must be used with Z-Wave Plus Master Dimmer (RF9640-N).
Multi-location dimming when used with master dimmer (RF9640-N).
Dimmable seven step blue LED display alongside push pad indicates selected light level - even in full daylight (coordinates light level status with associated dimmer accessory).
UNIQUE Z-WAVE: The Stelpro KI is the first Z-Wave thermostat in North America to work with line voltage, with a 2-wire connection to the heater..
EFFICIENT HEATING: Remotely control your baseboard and convector heaters from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately)..
SAVE SMART: Set your own temperature schedules to reduce energy bills with minimal effort.
take advantage of the device's ECO mode, designed to be as energy-efficient as possible..
ELEVATED CLIMATE CONTROL: Create advanced automations by pairing the Stelpro KI with other Z-Wave devices. Trigger the heating on/off with a door/window sensor, temperature sensor, motion sensor, etc..
CERTIFIED QUALITY: This thermostat is Z-Wave Plus and UL certified. Made in Canada. Works with SmartThings, Vera, HomeSeer, Nexia and Wink..
Aeotec WallMote Quad, Wireless Zwave on Off Switch, Z-Wave Plus Enabled, 4 Zwave Button, 16 Scene Wall Switch with Remote Control, Work with Z Wave Hub
It is great as the zwave light switch that you can place anywhere. But WallMote is also the zwave remote that you can use anywhere..
Group Z-Wave and other connected devices together via your z-wave hub and activate them via WallMote Quad..
Work with other z wave devices. Control many. And all with a single tap Each of zwave smart button can be programmed to control one Z-Wave device or many.
Aeotec Range Extender 7, Zwave Extender and Repeater (One Pack)
WIRELESS ZWAVE REPEATER- Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave / Z-wave Plus devices. 250% further wireless range.
50% FASTER Z-WAVE COMMUNICATION- Built upon Aeotecs unique Gen7 hardware and firmware stack, stable performance, achieving seamless automation.
SECURITY 2 SYSTEM COMPATIBLE- This particularly means it can amplify and repeat signals from security focussed devices, including door locks and smoke sensors.
SMARTSTART QR CODE- Simplest possible device installation. Compatible with Zwave hub including Control4, Fibaro, SmartThings, Vera and more..
Easy as plug and play. Start your smart home here. Z-Wave Plus certified. Certification number: ZC12-19080007.
FIBARO The Button Z-Wave Plus Scene Controller On-Off Trigger, FGPB-101-3, Red
The ZRC-90 Scene Master is a Z-Wave Central Scene Controller. When one of the buttons on the ZRC-90 is pushed, your Z-Wave central controller will receive a signal which it can use to trigger.
Frequency Region: U.S./Canada/Mexico, Z-Wave Library Version: 6.51.06.
7″ color widescreen display, 800 x 480 resolution TFT display with 16 million colors.
Centralized control of security system, video cameras, Z-Wave enabled thermostats, lights, locks and more from your Tuxedo Touch. Use either Wi-Fi or Ethernet to connect to the premises LAN. View up to four IP cameras at once on the Tuxedo Touch display..
Z-Wave controller built-in Supports up to 232 Z-Wave devicesMost Z-Wave enabled thermostats, locks, lights and shades are compatible (see compatibility charts).
Aeotec TriSensor, Z-Wave Plus S2 Enabled Zwave Motion Sensor, Temperature, Light Sensor, Work with Zwave Hub Smartthings 3-in 1 Security System, Battery Powered
3-in 1 Motion, Temperature, Light sensor. Motion sensor accurate to 23 feet, TriSensor also detects temperature -10~50°C / 14~122°C with accracy of ±1°C, 0~30000 LUX with ±3% accracy..
Wireless and Cordless. Powered by 1 x CR123A battery, estimated battery life: 1 Year. Battery not packed with the box..
Adjustable calibration. Craft your own smart home with 3 levels of detecting calibration..
Compatible with certified Z-Wave gateways including: Samsung SmartThings, Vera, Zipabox, Open Z-Wave, Homeseer HS3, Domoticz, Isy994i ZW universal controller and more..
Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-18056128..
Nanlite PavoTube 30C 4 ft RGBW LED Tube with Internal Battery
Siren 6 is your home’s smart indoor siren. Built with Z-Wave Plus S2 to be a smart home security siren, it features a 110dB speaker coupled with....
Pre-loaded 6 security sounds, 8 safety sounds, and 30 tones in total. Each tone is volume adjustable between 80dB and 110dB.
hour backup battery lets Siren 6 work even when power is turned off.
Can also be used as doorbell by pairing with Aeotec Button. Can use up to 3 Buttons, each sold separately.
Compatible with certified Z-Wave gateways including: Samsung SmartThings, HomeSeer, Open Z-Wave, Zipabox and more(Not compatible with Vera). Z-Wave....
Motion Sensor Alarm, PIR Indoor Motion Detector with Siren, 125dB Motion Detector with Remote Control(White)
360 DEGREE DETECTION. Ideal for ceiling height of 8 feet to 13 feet (Designed specifically for Home and Office use).
ADJUSTABLE SENSITIVITY with LED status indication. Craft your own smart home with different levels of detecting sensitivity..
ZWAVE Plus Technology. Real-time battery power level monitoring, Anti-tamper alarm, Low consumption..
COMPATIBLE with the following certified Z-Wave Hubs: FIBARO, VERA, HOMESEER..
EASY SETUP. Takes only moments to install and easily pair up with Z-wave gateway. The wireless device is powered by 2 replaceable AA batteries, estimated battery life: 2 years..