GUWARRY 2-Player Zero Delay USB Encoder PC to HAPP Joysticks/HAPP Arcade Buttons for PC, MAME, Raspberry Pi, Arcade1Up - Three 5V Power Output for led Joysticks/LED Daisy Chain/LED Arcade Buttons
Zero Delay USB Encoder for 2-Player Arcade Game DIY Projects..
3 x 5V Output Design. No Need Extra Power Sources For LED Joysticks / LED Daisy Chain / LED Arcade Buttons..
Wire Terminal is JST XH2.54 to 0.187 Inch(4.8mm) quick connection plugs, perfect fit for HAPP Joysticks and HAPP Arcade Buttons..
Support for Raspberry Pi, PC, Windows, Arcade1Up, Mac, Widely used for Arcade Game Console DIY Projects..
Build your own Arcade Game Machine. Supper Easy Installations..
WINSINN 40mm Blower Fan 24V, 3D Printer Micro 24 Volt Fans Blower 4020 Dual Ball Bearing, Brushless Cooling 40mmx20mm 2PIN (Pack of 2Pcs)
✔️WINSINN 40mm blower fan 24V which micro size and lightweight design, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
✔️Rated Voltage: DC 24V, Current: 0.09A, Power: 0.96W, Speed: 6500PRM, Air Pressure: 8.34mmH₂O, Airflow: 3.5CFM, Noise: 33.4dBA.
✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling ventilation..
✔️Packing List: 2 x 40mm Blower Fan - 24v - Dual Ball Bearings, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 20mm.
FYSETC Prus i3 MK3 Upgrade Hotend Parts HT-NTC100K Thermistor Sensor High Temperature +250 Degrees 2 Pins for 3D Printer MK3 Extruder Heater Block 3Pcs
Upgrade HT-NTC100K Thermistor: package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the....
The temperature measurement: -50 °C ~ +250 °C for a long lifecycle, sometimes can reach up to +300℃ for a short time using, can replace the....
The Customized Terminal Connector( XH2.54 2P with buckle) is specially for MK3/MK3S prus einsy boards, so please check before ordering. If for Prus....
HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement..
HQProp 32pcs 31mm 3-Blade Props with 1.0 mm Shaft Micro Whoop Drone Propellers for Tiny Whoop FPV Racing Whoop Like iFlight A65 Quadcopter(Grey and Transparent Blue)
The USB plug can be connected to the computer, mobile phone charger, mobile power supply for battery charging, easy to use..
Can be used with XH2.54 revolving JST bus conversion cable, and it can charge 3.7V lithium battery through JST plug, which is more widely used..
The 3.7V lithium battery can be accurately charged, and it will automatically stop charging after being fully charged without overcharging..
Safe to use, just connect the USB cable to the device to charge normally without monitoring..
Small size, easy to carry, allowing to charge the battery anytime and anywhere, suitable for X5C, 818a, X1, X4, HS170, X300, X400, F181, F180 quadcopter, etc..
UCTRONICS Fan Adapter Board for Raspberry Pi Upgraded Complete Enclosure and Raspberry Pi Cluster Case, Compatible with Raspberry Pi 3/3B+/4B, Output 5V Power
This fan adapter board is designed for Raspberry Pi desktop cluster cases and supports any Raspberry Pi motherboard with micro USB or USB C power..
With 4 pins on the adapter board, it can provide 5v power to two fans, which is the best way to power your fans when your Raspberry Pi GPIO is occupied by the PoE hat and keep your device cool at all times..
Plug and play: The fan adapter fits any 5V fans with an XH2.54 duplex connector. Simply plug the red wire of the fan connector into the positive and the black wire into the negative to run. Size:0.51*0.59 inch..
Compatible ASIN List: Raspberry Pi Complete Enclosure: B09JNHKL2N, B09S11Q684.
Raspberry Pi Cluster Case: B099RR1ZCT, B09K439BTY all are suitable for this fan adapter..
WINSINN 50mm 5015 Blower Fan 12V, 3D Printer 24 Volt Fans Blower Turbine Turbo Dual Ball Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 4Pcs)
✔️WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place..
✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
✔️Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA.
✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm.
✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel cage, humidifier, aromatherapy and can be used as a replacement fan for any electronic products..
AEDIKO 4pcs 5015 Cooling Blower Fan 3D Printer Fan DC 24V Dual Ball Bearing 50x50x15mm 0.17A Turbo Cool Fan
High Quality:5015 Fan is Made of Special and Premium Materials for the Fugetek FG-637, 647 and FG-857 Projectors,Which is High Temperature Resistant and Extremely Durable.
Easy to Install: Cooling Fan come with 2 Pin 30cm Wire Cable and the Cable with 2 Pin XH2.54 Power Connector ,Plug and Play ,Very Easy to Install.
Application: 5015 Blower Fan Widely Used in Humidifier, Aromatherapy and Other Small Appliances Series.
Small Heat Radiating Communication Equipment.
Intelligent Industrial Control Equipment Plate Cooling Heat, High Precision Medical Equipment Cooling.
Package Contents: 4pcs DC Blower Fan, If You Have Any Question for the Product, Please Feel Free to Contact US, We Will Do Our Best for You.
Small Modern LED Ceiling Light,2 Rings Creative Design Ceiling Lamp Indoor Lighting Fixtures for Hallway Living Room Bedroom Kitchen Office (Cool White,6000K)
ELEGANT DESIGN - Modern design ceiling lights, it is a perfect indoor decorative lighting, with eye-catching appearance, provides a charming ambience with a bright light source..
SIZE - L27xW20×H6cm/L10.63xW7.87xH2.36inch, Power:32W,high-quality LED chips creating a bright and cozy atmosphere for your living spaces..
ENERGY SAVING - Low power but high brightness. High efficiency LED chip, no need to buy the bulb replacement, can help you save about 85% on electricity bills..
MATERIAL - The ceiling light is constructed of high quality metal frame that creates the minimalist look, the silicone cover and metal bracket are better light transmission and heat dissipation for ceiling lamps..
WIDE APPLICATION - Modern led ceiling lamp is perfect for indoor lighting. Suitable for living room, bedroom, dining room, kitchen, hotel, aisle, children's room, entrance, corridor and stair lamp on ceiling..
