Best Nickel Tubing

MAXPOWER 4PCS Locking Pliers Clamp Set, 7 inch 90 degree Offset Locking Pliers, 7 inch Locking Pinch Off Pliers, 9 inch U Shaped Jaw Locking Pliers, 8 inch Locking Sheet Metal Clamp

90° Jaw left angle locking pliers x 7" Length, Max opening capacity 2-3/4" (70mm), Throth Depth 2-3/4" (70mm), Long nose jaw make clamping and holding parts, nuts and bolts easier access into narrow and deep tight space.
Locking Sheet Metal Clamp x 8" Length, Clamping range of 1-3/16" mm (30mm), For tightening, bending and crimping thin sheet steel.
U-shaped Welding Pliers x 9" Length, Clamping range of 2-5/16" (60mm), For clamping profiled, pipes or flat material.
Locking Pinch Off Pliers x 7" Length, pinch-off and locks on to tubing, suit for blocking flow of gas, Use only to pinch off soft copper, aluminum or any soft metal tubing.
There's a hex Hole on knurled thumb screw for using with hex keys( NOT included ), Offering more tightens to adjust pressure and draw materials together.
MAXPOWER Locking welding pliers and clamps set, Constructed with chrome-vanadium steel jaws with nickel plated finish.

BEST VALUE Garbage Disposal Air Switch on Amazon w/ Bonus DUAL OUTLET for Optional Hot Water Dispenser.
MONEY BACK GUARANTEE - Feel Confident That This Easy to Install Air Switch Will Do The Trick For Your InSinkerator, Waste King, Moen OR KitchenAid Disposal/Disposer Unit on ANY Counter Top or Sink Top.
CLEAN & SIMPLY DIY Way To Install That Garbage Disposer When An Outlet IS Not Easily Present Or The Access To Installing A Switch Is NOT Possible. Includes a 3FT Power Cord & 6FT Black Vinyl Tubing.
AIR ACTIVATED Switch With A CHOICE OF SWITCH Cover To Support YOUR Decor. CHOOSE 1) Satin/Brushed Nickel, Chrome or Red Oil Bronze.
COMPARE TO Insinkerator STS-00 DUAL OUTLET Garbage Disposal Air Switch. Includes Mountable Power Module w/ 6ft Power Cord and Vinyl Air Tubing. The Secondary Outlet Runs As An Alternating Switch And Is Never On When the Primary Garbage Disposal Outlet Is Engaged.

Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing.
High Pressure Resistance, Temperature Resistance.
Seal ability and good repeatability, Easy to disassemble no flaring tool required.
Safe and reliable, Nickel plated brass construction.

Processing technology：Plating can be tested by salt spray 96 hours neutral, copper layer 35um. Nickel 18um chromium 0.25un, plating grade 8 above.
1 x Engine Guard Crash Bar(1 1/4 " (32mm) Diameter Metal Tubing)(Material: Iron).
Fits 2000-later FL Softail models(Replaces OEM: #49140-05).
With always fast and free shipping on every order,focusing on Quality and Service,so you can shop with confidence.

25 Ft Roll x 3/16" copper-nickel alloy COATED OD Zinc plated steel brake line tubing with 16 assort fittings..
It won't rust, corrosion resistance, extremely easy to bend by hand and flare by simple tools..
The brake line is very flexible and very easy to bend and flaring to mount - you can manually bend our brake lines without the need for a bending tool.
It includes SAE flare Nuts and meets relative international standards..
With superior durable material and great performance for longer use..

of 1-Inch Tubing, (3) Air Outlet Kits WITH SAFETY SHUT OFF BALL VALVES, (2) Tee Fittings, 1-Inch Straight Fitting, (30) Pipe Clips, Debar and Cutter Tool..
HIGHER FLOW RATE: This M6580V 1" Maxline 300FT Master Kit flows at 82 CFM at 300FT, versus the M7580 3/4" equivalent that flows at 39 CFM at 300FT..
175 PSI Maximum working pressure, 1-Inch inside diameter x 1.2-Inch outside diameter..
Compression style nickel plated brass fittings. Use only with Maxline 1-Inch system..
Recommended on Industrial sized air compressors 7.5HP through 15HP..

Auto Supplies Direct 3/16" 3-Way Female Brake Line Tee Fittings Pack of (3) for Cars and Trucks.
For Automotive Brake Line Systems, Works With Your Preferred 3/16" Brake Line Of Your Choice.
Most Common 3/16" SAE Inverted Flare (3/8" - 24 Thread, Inverted Flare) / Double Flare Size.
High Pressure Resistant, Constructed From Safe and Professional Quality Brass, Lead Free.
Compatible With 3/16" Steel, Copper, Nickel Poly Armour, and Cupronickel Tubing.

90-degree elbow for connecting two pipes or fittings at an angle.
Push-to-connect fitting connects to pipes or tubing on one end and has an NPT male connector on the other.
Made of nickel-plated brass for durability and corrosion resistance.
Operating temperature ranges from -4 to 175 degrees F.

Make your PC a visual masterpiece with a complete Hydro X Series RGB hardline custom cooling kit, giving your system a stunning, distinctive look with....
Easy and intuitive installation and setup, with the option for automated software control to set your fan and pump speeds to their lowest possible....
Dynamic, individually addressable RGB lighting integrated into the XC7 RGB CPU water block, XD5 RGB pump or reservoir, and QL120 RGB cooling fans....
The XC7 RGB CPU Water Block combines premium nickel-plated copper construction and extreme cooling performance, compatible with Intel LGA 1200 and AMD....
Create stunning loops with XT Hardline Tubing, easily cut and bent to your needs using the included saw, bending mandrel, tube holder, and silicone....

Auto Supplies Direct 1/4" Brake or Fuel Line Fittings Assortment for Cars and Trucks.
Total of (15) 1/4" Tube Line Fittings- (5) 1/4" Tube Nuts, (5) 1/4" Long Tube Nuts, (5) 1/4" Unions.
Most common SAE inverted flare / Double flare size.
Compatible With 1/4" Steel, Copper, Nickel, Poly Armour, and Cupronickel Tubing.
High Pressure Resistant, Constructed From Safe and Professional Quality Brass, Lead Free.