REPLACEMENT 58 PSI FUEL FILTER REGULATOR - Fuel pressure regulator filter kit comes with 6AN adpater fittings for LS Swap , which can deliver 58 PSI (4 BAR) to your fuel rail and return unused gas to the tank. Besides, it can ensure the clean fuel is delivered properly to your engine with a 10 micron fuel filter, which play an important role in protecting the daily operation of the engine, and extending the engine service lifespan..
GSL392 HIGH PRESSURE FUEL PUMP - LS Inline fuel pump is designed to start higher-pressure fuel racing or performance-purpose vehicles stably and safely, which can help to meet the requirements of most modern turbocharging applications. At 80 PSI, Yinlowa 255 lph high pressure fuel pump can flow around 132 liters (35 gallons) per hour.
At that same 80 PSI the equivalent HP (high pressure) fuel pump can flow over 210 liters (50 gallons) per hour.
FITMENTS - GSL392-400-939 Inline Fuel Pump fits EFI applications including turbo and supercharged, variety of pressures and flows available, including high pressure performance.
58 PSI Fuel Pressure Regulator AN-6 Fittings for LS Swap EFI Conversion i....
Carter Electrical Fuel Pump Automotive Replacement 12V (P4594)
SIMPLE AND QUICK INSTALLATION: All necessary hardware is provided so you can have a hassle free automotive replacement installation. Instructions also included for a step by step wiring guide..
TOUGH TURBINE TECHNOLOGY: Inspired military strength and performance, this fuel pump provides improved and QUIET fuel flow for adequate pressure and lowers current strain to meet specific engine requirement..
FRESHER FUEL: Made with a multi-layer filtration technology, this electric pump provides 40% more dirt holding capacity, keeping your pump and engine safe from impurities and providing increased pump longevity..
WHAT'S INCLUDED:For a proper installation, Carter electrical in tank fuel pump comes with the following components: fuel pump, strainer, wire harnesses, tank seal, and grommets..
Carter Universal Electrical Fuel Pump Automotive Replacement 12V (P4602RV)
SIMPLE AND QUICK INSTALLATION: All necessary hardware is provided so you can have a hassle free automotive replacement installation. Instructions also included for a step by step wiring guide..
TOUGH TURBINE TECHNOLOGY: Inspired military strength and performance, this fuel pump provides improved and QUIET fuel flow for adequate pressure and lowers current strain to meet specific engine requirement..
FRESHER FUEL: Made with a multi-layer filtration technology, this electric pump provides 40% more dirt holding capacity, keeping your pump and engine safe from impurities and providing increased pump longevity..
WHAT'S INCLUDED:For a proper installation, Carter electrical in tank fuel pump comes with the following components: fuel pump, strainer, wire harnesses, tank seal, and grommets..
A-Team Performance - Two in One Electric Fuel Pump and Inline Filter Kit with Mounting Bracket
Two in One Electric Fuel Pump and Inline Filter Kit with Mounting Bracket.
Kit Features — High-flow pump, efficient filter, and an easy to mount bracket.
Electric Fuel Pump — Great fuel delivery solution for EFI power plant. Compatible with EFI gasoline applications, flows at 320 liters (85 gallons/hour).
Inline Fuel Filter — Designed for maximum flow, with almost no pressure drop, and can be used in fuel injected or carbureted engines with low or high horsepower.
CNC-Machined Bracket — Lightweight billet aluminum, designed for Bosch 044 Style Fuel Pump (JM1040) and Inline Fuel Filter (JM1021, JM1022, and JM1023).
Fill-Rite FR4211H 12V 20 GPM Fuel Transfer Pump with Standard Mechanical Meter Package, Gallons Gasoline, Diesel, Kerosene, Ethanol & Methanol Blends & Biodiesel
100% FACTORY TESTED: Carter mechanical fuel pumps have undergone several factory testing and received approval for reliability and long term usage. Experience quality with a reassuring 12 month limited warranty with Carter mechanical pumps..
REDUCED CORROSION: Mechanical pump is located outside the fuel tank which provides the ultimate protection from corrosion and exposure to contaminates. Preserve your pump in the best condition while receiving reliable fuel..
SMOOTH & POWERFUL TRANSFER: Keep your vehicle running smoothly with Carter mechanical pump. With an enclosed camshaft, the pump is able to effectively carry fuel to the carburetor because every bit of fuel is suctioned and transported with ease..
SOLID STURDY BUILT: Tough in construction, Carter mechanical fuel system keeps fuel pressure at bay while effectively enclosing and guarding the fuel heat transfer..
VEHICLE FIT: Chevrolet Small Block Street Performance Pump.
CarBole Gasoline Pump Electric Fuel Pump Universal 5/16 Inch Inlet and Outlet Inline 12V 1-2A 28GPH 2-3.5P.S.I. Operating Fuel Pressure Self-Priming
Fuel transfer pump running on 12V, fuel pressure 2 to 3.5 PSI, Flow rate 28 GPH, Inlet and outlet size 5/16″(0.315 inch)..
Fuel pump connect with 2 bolt fitting, 2 wires design. Stronger suction to ensure the fuel feeding of the car more stable..
12V universal fuel pump fits for Cars, Trucks, Boats & Generators and purchased by confidence within 12 months warranty..
Perfectly suitable for Toyota, Ford, Honda, Mazda, and any other suitable car.
Fuel Pump for Gasoline, Not Fit for: E85 standard or for Ethanol, Diesel, Methanol and Race Fuel, Water and watery liquid. DO NOT USE PUMP WITHOUT A FILTER..
GOLD MEDAL PERFORMANCE: The M-150S fuel transfer pump is independent lab tested and has received the Gold Medal Performance Award for delivering three times more operating hours than our leading competitor's comparable pump..
DURABLE ALUMINUM HOUSING: Manufactured from high-quality diecast aluminum, our fuel transfer pump with automatic shut-off nozzle is extremely dependable and lightweight and will put minimal stress on your tank bung. The aluminum housing is rugged and corrosion-resistant to withstand years of work in any application..
ROTARY GEAR DESIGN: The rotary gear pump is engineered with fewer moving parts, which means less friction and wear on its components. Thus this rotary gear pump will have fewer needed repairs and longer life than a rotary vane pump. When you need reliable performance GPI’s gear pumps are over engineered to deliver..
EASY-TO-USE: The 12-VDC motor of our fuel transfer pumps is highly efficient as it delivers gasoline, diesel fuel, ethanol blends, and kerosene at flow rates up to 15GPM. Additionally, the innovative spin collar design of our fuel transfer pump makes installation fast an....
YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)
The fuel injector tester kit is designed to identify and diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar.
Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pre....
