Best Non center Cutting End Mills

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

Accusize Industrial Tools 4 Pc 90 Deg Indexable End Mill Set with Apkt11t3 Inserts, Cutter Diameter Includes 1/2'', 5/8'', 3/4'' and 1'', 0028-8416

  • 90Degree Cutting angle Nickel Plated. Screw down insert.
  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
  • with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
  • Uses APKT / APHW / APKR_APht / APMT insert (sold separately).
Check Stock

Accusize Industrial Tools 2-24'' by 0.001'' Resolution Inside Micrometer Set, 3011-5051

  • The combining of extension rods provides a wide measuring range. Supplied with a standard caliper gauge for zero setting..
  • Carbide measuring faces. Diameter of extension rods: φ15.5mm. Rod Diameter: 0.61".
  • Accuracy: Metric(3+n+L/50)μm, (n=number of rod, L=maximum. Measuring length (mm) [Inch]. Resolution: 0.0001".
  • Each interchangeable rod is marked with its measuring range. Use to measure 3 flute cutting heads such as end mills, taps and reamers..
Check Stock

F&D Tool Company 11091-A7382 Staggered Tooth Side Milling Cutter, High Speed Steel, 3.75\ Diameter, 1/2\ Width of Face, 1.25\ Hole Size

  • 90Degree Cutting angle Nickel Plated. Screw down insert.
  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
  • with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
  • Uses APKT / APHW / APKR_APht / APMT insert (sold separately).
Check Stock

HHIP 1/2 INCH R8 Shell END Mill Holder (3900-1711)

  • Diameter for Bore in Shell End Mill 1/2".
  • Diameter range of standard end mills is 1-1/4 to 1-1/2"..
Check Stock

Accusize Industrial Tools 3'' by 1'' 90 Deg. Square Shoulder Indexable Face Mill with 17 Pcs Apkt1604 Inserts, 4508-0018b+0056-1604

  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
Check Stock

WEN DB003E 3Piece 90° Square Shoulder Indexable Carbide End Mill Set with Aluminum Storage Case

  • Includes 3/8, 1/2, and 5/8-inch end mills with indexable APKT1003 Carbide inserts.
  • Protective aluminum case makes for easy storage and transportation.
  • Reversible Carbide inserts double the cutting lifespan of each bit.
  • Compatible with the WEN 33013 Metal milling machine and the WEN 33182A R8 collet set.
  • Universal design fits any collet set available on the market (required for operation).
Check Stock

HHIP 3600-0056 End Mill Grinding Fixture (Angle) 5C

  • Solid negative ball stops with 15 degrees spacing fast & easy set-ups..
  • Can be used for grinding 2-3-4-6-8 and 12 flute end mills.
  • This fixture takes 5C round collets for grinding end mill 1/16" ~ 1-1/8" .Clearance & relief angels are built into the base.
  • Shell mills can easily be held with Straight Shank arbors.
  • Clearance & relief angels are built into the base.
Check Stock

BONYTOOL Dovetail Milling Cutter HRC55 Coated Tungsten Steel Carbide Slotting End Mills 75° 60° 45° Chamfering CNC 4 mm -60°

  • Material: Tungsten steel, high hardness and good toughness.
  • Rugged construction, durable with long service life.
  • Milling cutter end mills machining hardness: HRC up to 55 degree.
  • Applicable machine tools: CNC machining center, CNC machine tool, engraving machine, fine engraving machine, high speed machine, etc.
  • Applicable materials: stainless steel, die steel, ductile cast iron alloy steel, mixing steel, titanium alloy, etc..
Check Stock