Best Nozzle Tip Polishing Kit

Zhengmy 5 Pcs Spray Tips Reversible Airless Paint Sprayer Nozzle and Gun Filter Replace for Machine (209,311,415,515,623)

  • Considerate Combination: you will get 5 pieces of black airless sprayer tips and 5 pieces of airless spray gun filters.
  • Each tip is equipped with an airless spray nozzle and a nozzle seal.
  • The universal design makes them suitable for most airless spraying machine products on the market.
  • Nice Compatibility: these paint sprayer tips are compatible with most airless paint sprayers, and 209, 311, 415, 515, 623 correspond to the nozzle diameters of 0.009 inches, 0.011 inches, 0.015 inches, 0.015 inches, 0.023 inches, and the spray range is 4 to 14 inches.
  • Quality to Use: reversible airless spray tip is composed of quality metal and plastic, and its tip seal is made of stainless steel tip gasket and nylon, the total length of the filter screen is about 3.94 inches/ 10 cm, the mesh is uniform, and it is resistant to compression, simple to clean, and can be cleaned by rotating the nozzle, which are designed for replacing airless spray gun filter elements, spray gun accessories.
  • Easy Installation: no tools are required to install our reversible airless paint sprayer nozzle tip, and airless spray nozzle can be easily installed on the spray gun in a few simple steps.
  • First, use the nozzle to seal the nozzle into the protective seat, then insert the nozzle into the....
Check Stock

YESWELDER 60 Pcs Plasma Cutting Consumables Fit Cut40 50 with Plasma Cutter Torch PT31 LG40

  • PACKAGE INCLUDED▶5 Pcs Cup-15 Pcs Electrodes-10 Pcs Ring-30 Pcs Tip(Standard).
  • HIGH GRADE MATERIAL ▶100% brand new and high quality.
  • APPLICATION ▶These consumables can work with ESAB/L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch, these torches for Plasma cutting machines such as CUT-40, CUT-40D,LGK-40, CT312, CT312D,CT416,CT416D,CT518, CT518D, Super160, Super160P etc.*For 40 and 50 Amps Cutting Machine.
  • CHARACTER ▶Plasma electrode tips nozzle extended shroud shield cup kit,plasma tip nozzle electrode extended cutting consumable.
  • OUR PROMISE ▶We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time.
Check Stock

YESWELDER 110 Pcs Plasma Cutting Consumables Fit Cut40 50 with Plasma Cutter Torch PT31 LG40

  • APPLICATION ▶These consumables can work with ESAB/L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch, these torches for Plasma cutting machines such as CUT-40, CUT-40D,LGK-40, CT312, CT312D,CT416,CT416D,CT518, CT518D, Super160, Super160P etc.*For 40 and 50 Amps Cutting Machine.
  • HIGH GRADE MATERIAL ▶100% brand new and high quality.
  • PACKAGE INCLUDED▶10 Pcs Cup-30 Pcs Electrodes-20 Pcs Ring-50 Pcs Tip(Standard).
  • CHARACTER ▶Plasma electrode tips nozzle extended shroud shield cup kit,plasma tip nozzle electrode extended cutting consumable.
  • OUR PROMISE ▶We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time.
Check Stock

Pressure Washer Extension Wand, Aihand 24FT Telescoping Power Washer Wand with Gutter & Brush Cleaner Attachment, 7 Spray Nozzle Tips, 2 Hose Inlet Adapters & Belt Harness, 4000 PSI

  • ...le belt support harness. This helps you have better control of the pressure washer gutter cleaner and reduces the strain on your neck, arms and back. No need to climb ladders, it makes your cleaning job safer and more efficient, allowing you to clean in comfort.
  • 【7 Spray Nozzle Tips】Aihand offers 7 different spray angles to make it easy to reach hard-to-reach areas. Nozzle kit includes 4 high pressure stainless steel quick connect nozzles (0°red nozzle, 15° yellow nozzle, 25°green nozzle, 40°white nozzle), one low pressure nozzle (65°black soap nozzle) and 2 jet stream tips (Blue tip for rinse mode, Pink tip for soap mode). They meet your cleaning needs in a variety of situations such as roofs, cars, fences, walls, windows, etc.
Check Stock

3M 8193 Mixing Nozzle, 1 Pack

  • Efficiently mixes a variety of 3M two component adhesives, sealers and foams..
  • 3M Automix 1/4 in Rounded OEM Seam Sealer Tip – PN08201, 3M Automix 3/8 in Rounded OEM Seam Sealer Tip – PN08202, 3M Automix 1/2 in Rounded OEM Seam Sealer Tip – PN08203, 3M Automix 3/8 in Flat OEM Seam Sealer Tip – PN08204, 3M Automix 3/8 in Double-Rounded OEM Seam Sealer Tip – PN08205, 3M Statix Mixing Nozzle – PN08194.
Check Stock

Ewigkeit MK8 Hotend Ender 3 and Pro Assembled Extruder with Aluminum Heating Block 0.4mm Nozzle(24V 40W)

  • Ender 3 hot end with 100% original and high quality accessories for Creality 3D printer.
  • Ender3 pro Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge is 24V 40W.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
Check Stock

Tool Daily Short Pressure Washer Gun, High Replacement, M22 Thread, with 5 Nozzle Tips, 4000 PSI

  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★Pressure washer gun kit includes: 1-piece Pressure Washer Gun, 1-piece brass coupler, 1-piece Red Nozzle (0 Degree), 1-piece Yellow Nozzle (15 Degree), 1-piece Green Nozzle (25 Degree), 1-piece White Nozzle (40 Degree), 1-piece Brass soap nozzle tip (65 Degree)..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★ATTENTION: NOT FIT GardenHose or WaterHose. High replacement pressure washer guns works with electric or gas pressure washer..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★Pressure washer wand has M22 THREAD and 14 MM INNER CONNECTOR FITTING. If hose has M22 14mm fitting with 14mm inside diameter, please connect to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, please connect the brass coupler to gun and hose..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★1/4’’ standard quick connector. Connects any accessories with 1/4’’ plug to the gun. Such as nozzles tips, pivoting coupler, foam cannon, extension wand, surface cleaner, undercarriage cleaner, water broom. Safety trigger lock to prevent unintended operation..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ....
Check Stock

Pressure Washer Tips Power Washer Soap Nozzle Tips Multiple Degrees 1/4 Quick Connect Design Up to 4,500 PSI 2.5 GPM(5-Pack)

  • 【Pressure Washer Nozzle Tips】Pressure up to 4500 PSI, 1/4-inch quick connect, 2.5 orifice size, 2.5GPM, adjusts 5 different cleaning angles..
  • 【5 Different Angles】1 Red 0 Degree Nozzle Tip (Stainless Steel), 1 Yellow 15 Degree Nozzle Tip (Stainless Steel), 1 Green 25 Degree Nozzle Tip (Stainless Steel), 1 White 40 Degree Nozzle Tip (Stainless Steel), 1 Black Soap Nozzle (Brass)..
  • 【Any Cleaning Area】Cleaning the underside of a mower deck, gutters, gas grill, vehicle, wheel wells, watering garden, and different spray angle allows you to clean hard-to-reach areas quickly and easily..
  • 【More Application Choice】Attached to a quick connect pivot coupler and Compatible with all Pressure Washers..
  • 【Keep Nozzle Tips Clean and Lubricated】We aim to provide the highest quality service and the best product quality for each customer. Place your order without any worry. If you have any question, we will unconditionally solve for you!.
Check Stock

Sunhokey Extruder Assembled MK8 Hot End Kit for CR10 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle(12V 40W)

  • High-quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5..
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle..
  • MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 12V 40W..
  • Tip of the nozzle, aluminum heating block, throat pipe ..
Check Stock

Drilax 100 Pcs 1/2 x 3/8 inch Wool Felt Polishing Buffing Pad Included 2 Screw Mandrels 401 Compatible Dremel 414 Polishing Wheel Buffing Rotary Tools Attachment

  • Polishing Wheel Buffing Wheel Felt Polishing Pad Jewelry Making Tools Kit Compatible Dremel Buffing Wheels Total 102 PCS : 100 PCS 414 Felt Wool Polishing and 2 Pcs Standard 1/8 inch Mandrels Included.
  • Rotary tool buffing wheels jewelry making tools & accessories, 100% wool felt, jewelry tools kit, knife polishing compound pad, diamond polishing compound wool felt, made of top quality wool, jewelry making tool kit, for Rotary Tools.
  • Heavy Wool Felt Compatible Dremel Felt - Buffer Dremel and Hard Felt Polishing Wheel for Marble Buffing Pads jewelry tool kit, platinum polishing cloth, dremmel buffing wheel with mandrel jewelry making Cylinder Shape - Height 3/8 inch and Diameter 1/2 inch.
  • Replacement Compatible Dremel Polishing Wheel Buffing Wheel Dremel Jewlers Kit Jewelry Cleaning Cloth Polishing Cloth 100 Pcs - 100% Satisfaction Guaranteed.
  • Polishing bits, clock making kit, jewelry polish, diamond drill bits for stone, felt clock, coin bezels for jewelry making, diamond.
Check Stock