HORUSDY 60-Piece Master Tap and Die Set | SAE Inch and Metric Sizes | for Coarse and Fine Threads Tools
Made of high-quality hardened alloy steel, durable and superior strength. Suitable for cutting steel, copper, aluminum, cast iron and other materials..
Suitable for re-threading of fasteners and fastener holes, cutting or updating of internal and external threads. Precision milling of SAE and metric taps and molds are used for cutting raw materials or repairing existing threads, removing screws, etc..
All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance..
Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
6 Cans of ZeroR R1234YF_ Oil Charge. Oil charge is perfect for the single use and may be used in R1234YF_ Systems.
Can threads are standard R134_ but Installation requires a ZeroR Z134_ to R-1234YF_ Can Tap and Gauge.
Must be used in non-backflow device hose (should be able to blow through each end of hose).
IMPORTANT: These cans are R134 can tap threaded (left hand thread) A R1234YF can tap will not work on this can and we suggest using ZeroR R134a Can to R1234YF Port Can Tap with Gauge.
Returns: This item is considered a HazMat Material and as such is not returnable. It requires hazmat certification to ship. Amazon does not supply a Return label and the seller will not supply return labels for this type of products. Please contact seller for any help you might need in using the product..
Carvedexquisitely Bulkhead Water Tank Fitting,1/2" NPT Female Thread,304 Stainless Steel Thru-bulk Fitting
Size:1/2" NPT female threaded,the actual diameter of 1/2" thread is 0.84 inch,NPT thread size is not the actual diameter, it is only nominal pipe size..
Bulkhead fitting are made of stainless steel, which is corrosion-resistant, rust-proof and has a long service life..
Note:The lock nut is Left-hand thread,and the external thread is used for the lock nut and cannot be connected to the pipe..
Wide range of uses: commonly used in water tanks, water towers, water inlets and outlets, self-made water storage buckets, rain buckets, and can also be used in various pipes, hoses, pipe fittings or faucets..
Bulkhead OD 25mm, suitable for about 25mm ID hole..
OCGIG 11 PCS Damaged Broken Screw Extractor Drill Bit Bolt Stud Remover Tool Kit Set
Made from Chrome vanadium steel, High hardness.
Drill bits' diameters and recommended extract diameters of broken screws are etched on case.
Aggressive left handed(extractors) and righted handed(drill bits) spiral flute design for extra gripping power.
Ideal to remove damaged, rusted or stripped screws, studs, bolts, fastener, metal water tap and water tube, etc.
Note:First drill a dragon on the broken screw with an electric drill, then gently tap the extractor into the hole and use a wrench to rotate counterclockwise to take it out.
KOOTANS Ratchet T Handle Tap Wrench + 5pcs M3 M4 M5 M6 M8 Machine Screw Metric Thread Milling Plug T-shape Taps Set, Both Way Hand Tap Set Adjustable Manual Tapping Tool Kit for Home Use (Short)
... slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod..
EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping..
WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.).
uxcell Metric Machine Tap M4 x 0.7mm H2 HSS Ti-coated 3 Straight Flutes Thread Tapping DIY Tool
Tap Size: 3/8"-24 UNF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
{Note}This is a small straight groove tap, which can be used for tapping of round through holes or shallow blind holes. Pay special attention to not being used for blind hole tapping..
{Widely Usage}Tapping can be done on stainless steel, iron, aluminum, copper, general steel and other materials. It can be used with manual equipment or special processing consoles, such as tapping machine, driller's integrated bench drill, CNC numerical control lathe, machining center, etc..
uxcell Thread Milling Threading Tap 9/16 -24 UNEF Left Hand Machine HSS High Speed Steel 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade
Tap Size: 9/16"-24 UNEF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
uxcell Thread Milling Threading Tap 9/16 -18 UNF Left Hand Machine HSS High Speed Steel 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade
Tap Size: 9/16"-18 UNF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
