Best Ntc Smd Thermistor

Itrusou Milk Frother and Steamer, 8-in-1 Electric milk frother, Automatic Hot and Cold Foam Maker for Coffee, Stainless Steel Milk Warmer Dishwasher Safe for Latte, Cappuccino (13.52oz/400ml, Black)

  • Good for Multiple Drinks: The milk frother has a maximum capacity of 13.52oz/400ml for heating milk and 5.41oz/160ml for milk foaming which means you can froth the milk for multiple drinks at once..
  • Extra Safe: ETL / FDA/ FCC listed foam machine is equipped with micro switch, strix temperature detection, and NTC thermistor. It will automatically shut off when 1. your milk or froth is ready 2. the jug is off the base 3. it is overheated. Buy with Confidence! Backed by a full 2 year warranty, 90 days money back guarantee, 24 x 7 E-mail Support..
Check Stock

Edgewater Parts 2188819 AP6006067 PS11739131 Refrigerator Thermistor Compatible with Kenmore KitchenAid Whirlpool and Maytag

  • A thermistor is used to detect the temperature in the air inside of your refrigerator..
  • This product is covered under a 1 Year Warranty.
  • Edgewater Parts 2188819, AP6006067, PS11739131 Refrigerator Thermistor Compatible with Kenmore, KitchenAid, Whirlpool, and Maytag.
Check Stock

STANDARD IGN PARTS Engine Control Module Wiring Relay RY-412

  • Communicates the engine coolant temperature to the ECM to ensure proper air/fuel ratio, cooling fan and temperature gauge operation.
  • Thermistor placement within the housing matches original design to ensure proper output.
  • Proper thermal conductive grease to provide accurate temperature transfer to the thermistor.
  • Causes for replacement: check engine light, no/erratic gauge operation, no/erratic cooling fan operation, engine overheating.
  • Causes for replacement: rough idle, engine hesitation, poor fuel economy, failed emissions test.
Check Stock

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

Testo 0613 5505 NTC Clamp Probe, -40 to +125 degree C Range

  • NTC clamp probe for measurement on pipes for 6mm to 35mm diameter.
Check Stock

10Pcs Car Temperature Gauge Kit-Coolant Temperature Gauge - Digital Temperature Gauge 2inch 52mm Universal Car Truck LED Water Meter Instrument Tool

  • ... degrees Celsius. High sensitivity, easy and convenient to use. - reloj temperatura fae.
  • ❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - coolant temp gauge.
  • ❃Principle: The water temperature sensor is a thermistor sensor. Screwed to the engine cooling water channel. The thermistor determines the amount of current flowing through the coil of the water temperature gauge. To guide the meter hands - coolant temp gauge.
  • ❃ High quality: The water temperature gauge is made of ABS, sturdy and durable.ABS has excellent complete physical and mechanical properties and good low temperature impact proof. Dimensional stability. Electrical properties, wear proof, chemical proof, dyeing, finished product processing and mechanical processing are better. - car temperature gauge kit.
  • ❃Easy to read in the dark: The blue light on the dial makes it easy to read in the dark. Its measurement range is 40-120 degrees Celsius. High sensitivity, easy and convenient to use. - reloj temperatura fae.
  • ❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - coolant ....
Check Stock

Kee Pang All-Metal V6 J-Head Hotend Extruder Hotend kit with 2 pcs Stainless Steel Nozzle Throat + 5 Pcs Brass Printer Nozzles for E3D V6 Makerbot RepRap 3D Printers

  • 100% SATISFACTION GUARANTEE: Refund your money in 30 days.Any accessory appears to be unable to work, please contact us and get free replacement.
  • High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high....
  • Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking.
  • Easy to install: NTC connector with terminal, you can install directly.
  • Compatibility: Compatible with all 1.75mm V6 3D printer.
Check Stock

OIIKI 5 PCS HT-NTC 100K Temperature Thermistor 3D Printer Parts Sensor High Temperature +260 Degrees 2 Pins Thermistor for Reprap 3D Printer MK3 Extruder Heater Block

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

638285 Replacement Thermistor for Norcold, 12-Month Warranty

  • FEATURES: MF58 10K Ohm NTC Thermistors with B Value: 3950(+/-1%).
  • DESIGN: Glass sealed packaging with firm structure, small size and light weight, applicable in severe environments.
  • PERFORMANCE: High precision resistance, B values with high reliability and stability, high sensitivity.
  • APPLICATION: Suitable for related equipment with temperature measurement and controls thermal protection circuits in various family appliances.
  • PACKAGE: 20 Piece x Electrical Axial Lead NTC Thermistors Resistors.
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock