PerfectPrime IR0002, Infrared (IR) Thermal Imager & Visible Light Camera with IR Resolution 3600 Pixels & Temperature Range from -4 ~ 572°F, 6 Hz Refresh Rate
Supports CM3/3+/4, Jetson Nano, Jetson Xavier NX.
Supports night vision when works with infrared LEDs.
GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (8-Layers)
Wide Application --- The new 8-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry Pi 3B+/3B/2B/B+..
7inch HDMI LCD (H) (with case) 1024x600 Capacitive Touch Screen IPS Display HDMI Monitor with Toughened Glass Cover Case for Raspberry Pi 4/3/2/1 B B+ A+/Jetson Nano/Windows 10
Compatible with Raspberry Pi 7 inch touch display screen LCD, 1024x600 hardware resolution, configurable by software (up to 1920x1080),Toughened glass capacitive touch panel, 6H hardness.
Supports popular mini PCs such as Raspberry Pi 4/3/2/1 B+ B A+ zero zero w,Jetson Nano,BB Black, Banana Pi, as well as general desktop computers.
When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free,When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free.When works with Jetson Nano,supports Ubuntu, single point touch, driver free.
Multi languages OSD menu, for power management, brightness/contrast adjustment, etc..
3.5mm audio jack, supports HDMI audio output, Also supports VGA input (specific cable is required and should be purchased separately),High quality PC case, optional tilt angle: 30°/50°.
Metal Case with DC Brushless 5V PWM Fan for NVIDIA Jetson Nano Developer Kit,Cooling Fan and Metal Enclosure with Camera Holder Reset and Power Buttons Compatible with IMX219 Camera,Wireless-AC8265
The package includes Metal Case and 5V Dedicated PWM Adjustment Cooling Fan, for Jetson Nano Developer Kit. (NOTE: Jetson Nano Developer Kit is NOT included)..
The Metal Case with Clever design:easy access to the peripheral connectors.
with camera holder,dedicated place to mount your camera.
RESET and POWER buttons,It is easy to operate..
The Metal Case is Compatible with peripherals,eg:Camera: IMX219- 77 / 77IR / 120 / 160 / 160IR / 200 Camera, RPi Camera V2 / RPi NoIR Camera V2.
The metal case Structure Introduction:Camera holder, dedicated place to mount your camera.
Easy access to the extension header, with clear label.
Opening for onboard connectors and cooling fan.
The Fan supports 5V voltage.PWM Speed Adjustment, Strong Cooling Air.The Cooling Fan with 4PIN reverse-proof connector.Dimensions: 40mm×40mm×20mm.
Ingcool 4G/3G/GNSS HAT Module for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano, Based on SIM7600A-H, 4G/GNSS Module Support LTE CAT4 up to 150Mbps for Data Transfer, etc.
SIM7600A-H 4G HAT is a 4G/3G communication and GNSS positioning module, supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH series boards, Compatible with Jetson Nano, SIM7600A-H 4G module control pins can connect with host boards like Arduino/STM32.
Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
Connect the 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc..
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
Arducam Sensor Extension Cable for Raspberry Pi Camera Module V2, 300MM/1FT Cable to Extend IMX219 Sensor for Smaller Enclosure, Narrow Space Project, Work with V2 Camera on Jetson Nano
Fresh Design: A fresh Arducam design to extend your camera vision on the Raspberry Pi Camera Module V2 – peel off the sensor from the connector on the camera board and put our cable in between. It does NOT support 5MP V1 cameras or any other sensors..
Fresh Look: Give your Raspberry Pi Camera Module V2 a fresh look by freeing the sensor from the camera board without losing the traditional flex ribbon cable extension.
Fresh View: Having got rid of the restrictions caused by the camera board, you can now see in a new perspective and put the camera in a smaller enclosure and narrow space, like through a small hole or a tube.
Fresh Option: The extension cable is compatible with Arducam IMX219 Sensor drop-in replacement modules including IMX219 autofocus and IMX219 M12 lens series. Those combinations will also work with the NVIDIA Jetson Nano.
Note: Please detach and re-attach the connectors gently and carefully, otherwise you might cause damage to the connection. The Raspberry Pi Camera Module V2 is NOT included..
Waveshare IMX219-160IR Camera for Jetson Nano Infrared Night Vision 3280 × 2464 Resolution 8 Megapixels 160° FOV IMX219 Sensor Suit for Face Recognition Road Mark Detection License Plate Recognition
Supports CM3/3+/4, Jetson Nano, Jetson Xavier NX.
Supports night vision when works with infrared LEDs.
Arducam IMX477 HQ Camera Board for Jetson, 12.3MP Camera Board Compatible with Nvidia Jetson Nano/Xavier NX, Raspberry Pi cm 3/3+ and cm 4
A Can't-Miss Update to IMX219 - Much better picture quality and lens flexibility, thanks to 53% more pixels, 92% larger pixel size, 192% larger imaging area, and a CS-Mount. Maximum still resolution at 4056 × 3040, frame rates: 30fps@Full 12.3MP, 60fps@1080P..
Accelerated by Jetson Hardware ISP Engine - Support NVIDIA Argus Camera plugin for H264 encoding, JPEG snapshots, as well as gain, exposure, framerate, and group, hold control..
Plug-and-Play - You don’t need any hardware modification to work with jetson platform. Just a driver needed. More convenient than RPI official HQ cameras..
4-Lane Camera for the Future - Route out all 4 data lanes to the camera connector for customized carrier boards with 4-lane CSI connector and future 4-lane camera driver updates..
Note：It can't work on the standard Raspberry Pi models (like Raspberry Pi 3/3B+/4)..
