Best Nvx Amps

Little Giant 9S-SMPXRT-K 4/10 HP, 115-Volt, 6000 GPH Pre-Packaged Simplex Sewage Basin/Pump System - Assembly Required, Black/Blue, 509074

  • AUTOMATIC SUBMERSIBLE SUMP PUMP: with integral diaphragm switch activates when water reaches 7 to 10 inches and shuts off when water drops down between 1 and 4 inches.
  • BUILT TO LAST: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • APPLICATIONS: designed for sump pump systems and general water transfer application.
  • must sit in water to activate the switch.
Check Stock

Little Giant 6-CIA 115 Volt 1/3 HP 2760 GPH Cast Iron Automatic Submersible Sump Pump with Integral Diaphragm Switch 10-Ft Cord Blue 506158

  • AUTOMATIC SUBMERSIBLE SUMP PUMP: with integral diaphragm switch activates when water reaches 7 to 10 inches and shuts off when water drops down between 1 and 4 inches.
  • BUILT TO LAST: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • APPLICATIONS: designed for sump pump systems and general water transfer application.
  • must sit in water to activate the switch.
Check Stock

Moroso SWITCH,BATT DISCONNECT,SPR/DUTY (74102)

  • Moroso's Super-Duty switch with rating of 2000 amps intermittent and 300 amps continuous is perfect for engines with large starter draw, RVs, Drag Cars with alternators and other applications (20 amps on small terminals).
  • Two pairs of copper studs (1/2" -20 & 10 -32) make it ideal for disconnecting alternator (or other electrical device) in addition to the battery.
  • Sealed shaft keeps out moisture and debris.
  • Indexing pin aligns switch with mounting panel and prevents rotation.
  • also includes decal to indicate switch location during emergencies.
Check Stock

USB C Charging Cable for Rode Wireless Go 2 / ii Microphone System 3-in-1 Type-C 3A Charger Cord with 18W Fast-Charge Power Adapter 4ft Long

  • Compatible with Rode Wireless Go wireless microphone system and Wireless Go II (Wireless Go 2) dual wireless microphone system, used for transmitter....
  • 3 in 1 USB to USB-C cable, splitter style, with 3 type-c male plugs. Supports quick charging to 3 amps.
  • Black ABS wall charger, supports fast-charging.
  • Output 6 volts / 3 amps, 9 volts / 2 amps, 12 volts / 1.5....
  • Charging set supports multi-slot fast-charging for up to 3 devices（2TX and 1RX） simultaneously, at saved time.
  • Supports charge together by wall power interface.
  • Also supports charge separately by GameCapture / OBS / XSplit / Tipeee-Stream / Twitch / YouTube /....
Check Stock

Optima OPT8016-103 Batteries D34M BlueTop Starting and Deep Cycle Marine Battery

  • 12-Volt, 750 Cold Cranking Amps, Size: 10 inches x 6 7/8 inches x 7 13/16 inches tall, Weight: 43.5 pounds, Dual SAE & 5/16 inches Stainless Steel Stud Posts. 55 Ah C20 capacity.
  • Optimal starting power even in bad weather.
  • Mountable in virtually any position. Works well as a boat battery or RV battery.
  • Fifteen times more resistant to vibration for durability.
  • Reserve capacity of 120 minutes for constant performance.
  • Cranking Amps - 870 Ampere / Marine Cranking Amps - 870 ampere.
Check Stock

Kicker 41DXA1252 2 Channel Power Amplifier

  • CX-Series Amplifiers are the perfect combination of big power, bigger flexibility and true reliability!.
  • A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound....
  • Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!.
  • CX-Series amps include vertical and horizontal mounting hardware, so you can show off your install style!.
  • These powerful amps work with as little as nine volts of power from your battery, and as much as 40 volts (400 watts) of speaker-level input signal..
Check Stock

Johnson Pump of America 28552 Marine Pump Cartridge for 500 GPH Motor, Black, one Size

  • Switch is removable from the base for easy cleaning..
  • Turn pump on when water level reaches 2 (51mm).
  • Turn pump off when water level reaches 0.7 (19mm)..
  • Long life, switching frequency up to 10 million times.
  • Ultrasonic welding, forming a seal, reliable and secure, not leaking..
  • Heavy duty flow switch is designed for the toughest applications.
Check Stock

Little Giant 6-CIA 115 Volt 1/3 HP 2760 GPH Cast Iron Submersible Sump Pump with Extended Leg Kit and Integral Diaphragm Switch 10-Ft Cord Blue 506162

  • AUTOMATIC SUBMERSIBLE SUMP PUMP: with integral diaphragm switch activates when water reaches 10 to 13 inches and shuts off when water drops down between 4 and 7 inches (with leg kit in place).
  • BUILT TO LAST: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • APPLICATIONS: designed for sump pump systems and general water transfer application.
  • must sit in water to activate the switch.
  • 1.5-inch FNPT discharge, three 3.5-inch leg extenders included.
Check Stock

KouTouy Current Switch, Normally Open AMP Sensor Sensing Switch Monitoring Relay, AC 1-50A Detectable

  • ☛Self-powered, no external power supply required..
  • ☛Offers a sensing range of 1 to 50 amps and universal, solid-state outputs..
  • ☛The device output will switch loads at 120 Vac and 2.5 Amps maximum. In 240V circuit, only one 120V hot line is connected..
  • ☛Faster response time, once current flow is detected, it closes a set of contacts immidiately..
  • ☛Accurate and dependable, offers a sensing range of 1 to 50 amps and universal, solid-state outputs. Accuracy: 1%.
Check Stock

DC Power Fuse Distribution Strip Module 12 Position Screw Mount

  • Working voltage DC 0 to 32V. Maximum total input current 30 Amps. 12 Channels output, each channel maximum output current 3 Amps (Factory-installed....
  • Input terminals pitch 7.62mm/0.3", maximum current 30 Amps for per position, wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw.....
  • Output terminals pitch 5.0mm/0.197", wire size 26~12 AWG, stripping length 7mm, Metric M2.5 slotted screw..
  • Fuse holders for Medium Blade ATO/ATC Fuse, the fuse can be removed and replaced very easily. With fuse fail indication function, when you connected....
  • FR-4 fiberglass dual copper layers PCB. Taiwan High quality fireproof nylon material mount carrier(not China low quality carrier). Also included two....
Check Stock