Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
KAWASAKI 2008-2013 Ninja 250R / EX 250 R GALFER REAR STAINLESS STEEL BRAIDED BRAKE LINE KIT
Galfer Stainless Steel Braided Brake Lines – Increasing your braking power and feel is as easy as upgrading to the Galfer stainless steel brake lines. These lines will greatly improve your braking effectiveness because there is almost no expansion under pressure, requiring less force to operate at their maximum. The brake lever feel stays firm (less squishy than rubber hoses) at all times..
Galfer brake lines consist of three layers. The inner layer is a PTFE type 62 Teflon. The second layer consists of 16 strands of braided stainless steel. The outer layer is a plastic coating that protects the bike from scratches and keeps unwanted moisture out of the line. The kits come standard with polished silver on brass fittings with matching bolts..
Galfer brake lines come with a lifetime warranty. Color fade, hazing, even crashing your bike will not void the warranty. Simply contact Galfer directly, supply some information, and get your new line!.
All brake lines will be shipped in Galfers Clear (Silver) line color pictured in the main listing photo. Black, White, Smoke, Blue, Red, Gold, Yellow, Green, and Orange line colors are also available upon request . If you would like your line kit in any of these other line colors please contact us before you....
MMOBIEL 3 Pcs Hose Clamp Pliers Pinch Off Pliers for Fuel Hoses Gas Lines Radiator Coolant Hoses Brake Hoses in 3 Different Sizes - Red
High Quality Material: Made of high quality flexible Nylon Plastic, highly durable, long lasting and chemical / fuel resistant. Does not melt when....
Easy to Use: Very easy to use, simply place the hose clamp before the point where a hose needs to be cut or released. This way you can work freely....
Wide Application: These Pliers are mostly used in the Automotive industry, for car/truck/vehicle repair. They are ideal to use on brake hoses, fuel....
Set Contains: 3 Hose Clamp Pliers in different sizes: Small 1x 25cm x 5.38 x 2cm / 9.93 x 2.12 x 0.75 inches.
Medium 1x 18cm x 4.5cm x 2cm / 7.18 x....
High quality product by MMOBIEL: Each part is tested before shipment. Item in Stock..
EilxMag DOT Air Line Fittings Assortment, 44 Pcs Push to Connect Fittings NPT Male Thread & DOT Brass Air Brake Line Fittings Kit
...ittings are made of PBT Plastic, the air brake brass fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
【Quantity】: Unique dot air line quick connect fittings nylon tubing kit: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
【Typical Application】: The push-to-connect fitting 1/4 inch are suitable for PU / PA / PE / PVC. The dot air fittings assortment can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
【Easy to install】: Our air fitting kit quicks disconnect simply push tubing in, no ....
AutoWanderer Tool Brake Caliper Compression Tool, Car Ratcheting Brake Spreader Caliper Pistion Press Tool for Single Twin Quad Piston Disc Brake, Red
✔【Sturdy Material】: Brake caliper compressor uses high strength spreading plates with 1/6" thickness steel, not easy to deform, durable for long time use. Ergonomically designed reinforced handle, efficient, Comfortable & non-slip. Perfect Father's Day Gift.
✔【Universal Disc Brake Caliper Pistion Tool】: Brake piston caliper is equipped with 2 large push plates and 2 brake caliper hooks. The larger plate is fixed in place by built-in powerful magnets and cylindrical pins for easy and quick installation and removal. The hooks suspend the caliper, brake hoses, and other parts for easy inspection of other car components when brake repair..
✔【Easy to Operate】: Brake Pistion press tool adopts 360° ratchet design, which can be used in any direction. Centrally located ratchet evenly spreads force in a parallel manner when compressing pistons to ensure proper alignment and prevent damage to your brake components. The extended handle allows for easy change from spreading to retracting. Flip the switch in the ratchet for positive and negative adjustment. Tips: Both spreader plates need pressure to start the ratchet..
✔【Application】: Our professional brake caliper press suitable for all disc brake caliper press ratchet wheels. Ideal for mos....
