Berkeley Implant Dental Implant Multi-Driver Set 6 Short & 6 Long Drivers for Dental Practices
Includes 12 different driver tips (6 short & 6 long) with 4x4mm square insert, a 50 Ncm torque wrench, a hand adapter, and an organizer base. Compatible with all major implant brands. See photos..
The driver tips are precision-milled from hardened stainless steel and are torque-tested to sustain over 42 Ncm in strength – tough enough to provide the torque force generally required for tightening screws by major implant manufacturers, yet still gentle for the screws. Identification of the driver tips are laser etched on the side of each of the driver shaft. Short drivers are 7mm, long drivers are 14mm..
Comes with an elegant organizer with the names of the tips and their graphical icons laser-etched to help keeping the driver set organized. The case has pre-drilled place-holders for 6 long and 6 short drivers, plus 6 place-holders for spare drivers, 3 short and 3 long. You can have peace of mind knowing that the small items are all in their places when you need them..
Worx WX176L.1 20V Power Share Switchdriver 2-in-1 Cordless Drill & Driver with 67pc Kit
[SWITCH BETWEEN 2 BITS INSTANTLY] No need to stop to change out a bit, just turn the head to cycle between your 2 most useful bits.
[ELECTRONIC TORQUE CONTROL] Get the perfect amount of torque for the task at hand—prevents stripping, peeling, and damaging the work surface.
[SAME BATTERY, EXPANDABLE POWER] The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share family.
[LED WORK LIGHT] With a headlamp right on the front of the Switchdriver, you can see what you’re drilling in dark areas.
[2-SPEED GEARING] Between the 2 speeds and the 12 torque settings you have enough flexibility to do every common drilling application correctly.
[1/4” HEX QUICK CHANGE CHUCKS] When you do need that 3rd or 4th bit, the standard chucks accept all regular ¼” bits you find at your neighborhood hardware store.
[67-PIECE ACCESSORY KIT] Includes 46) Assorted Bits, 3) Nutsetters, 16) Sockets, a 1/4” Drive Socket Adapter, and a Blow-molded case.
StanceMagic - 1.25 inch (32mm) Wheel Adapters (Changes Bolt Pattern) Converts 5x108 to 5x114.3, 12x1.5 Studs, Compatible with Ford Jaguar Lincoln Volvo (5x4.25 to 5x4.5, Silver Spacers) 4pcs
...pattern. Wheel Must Have 5x114.3 (5x4.5") bolt pattern. Buyers also need to verify: 1) Vehicle Centerbore is no larger than 73.1mm.
3) Wheel Studs are shorter than 1.25" (32mm) length.
4) You have 1.25" (32mm) of space between the fender and the wheel/tire. NOTE: These are WHEEL ADAPTERS which are different from spacers (Not for 5x108 (5x4.25") Wheels).
[FITMENT] Compatible with Ford 2007-2019 C-Max, 2008-2019 Focus, Taurus, Thunderbird, 2002-2018 Transit Connect, Windstar. Compatible with Jaguar F-Type S-Type XJ XJR XF XFR XFR-S XK XKR XKR-S X-Type. Compatible with Lincoln Continental, LS, Mark 8, Mark VIII. Compatibl with Volvo C30 C70 S40 S60 S80 V50 V70 XC70 XC90. Compatible with Land Rover Range Rover Evoque, Freelander 2, Discovery Sport. Check year/make/model in Description. May fit other vehicles, verify with adapter specifications..
[SPECIFICATIONS] Four (4) Wheel Adapter Spacers | Thickness: 1.25" (32mm) Wide | Vehicle Bolt Pattern: 5/108 (5/4.25") | Wheel Bolt Pattern: 5x114.3 (5x4.5") | Hub Center Bore: 73.1mm | Stud/Nut Thread Pitch: 12x1.5 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent sur....
Hole Saw Quick Change Mandrel 7/16\ Shank New Hole Saw Arbor Fit 9/16\ to 10\ Hole Saw , Extra Pilot Drill Bit & Bi Metal Hole Saw, Big Value
This New kit includes: 1pcs 7/16” Hexagonal groove Large Quick Change Mandrel with 5/8” thread. It fits 1.21” to 10” hole saw, 1 Adapter with1/2” thread fits 0.55” to 1.2” hole saw..
Extra: 1set 1” ,1-1/4” Bi-metal hole saw(Max cutting depth 1.50”), 1x 4.35”, 2x3.5” silver HSS Drill bits with ¼” shank for arbor(only drilling for wood & soft metal),3x3.5” black HSS Drill bits with ¼” shank for arbor( for hard metal). 8×1” CrV Screwdriver BITS, 1 magnetic bit holder. It’s a Big Value..
The Large Arbor's plastic block is easy to grasp and force, and the material is light, strong, and clean. This plastic body is passed drop test and torque test..
This New quick change arbor kit is for quick connecter connection, convenient installation and unloading, large torque.
Time-saving to use is more than the traditional arbor 2 times..
This large arbor & adapter fits full size hole saw from 0.55” to 10” (14mm to 250mm) hole saw with 1/2.
ZKTOOL 3/8” and 1/2” Drive Crowfoot Flare Nut Wrench Set, 19PC Metric Tool 8 to 32 mm Sizes ,Flare Nut Wrench set for 3/8in and 1/2in Drive Ratchet.
[FUNCTION]: Crows foot wrench set includes 19 size metric Crowfoot flare nut wrenches for 3/8" and 1/2" drive ratchet, extension or torque, 19 size claw adapter to extend the range of common wrenches, Allows you to reach awkward angles and hard-to-reach areas that a regular socket or wrench cannot..
Packed inside (1) storage case for your convenience..
[EXTENDED RANGE]: crowfoot adapter extends the reach of a standard wrench to inaccessible fasteners in tight spaces that you would not normally have access to. Once in place, your existing ratchet, extender or torque wrench will attach to the crowfoot drive hole to drive the fasteners. They are both 100% compatible with your existing metric 3/8” and 1/2” drive tools, so they can meet all your needs..
[HIGH QUALITY]: Made of industrial grade, heat treated, drop forged chrome molybdenum steel to ensure nut wrench set durability, maximum torque and longevity against rust and corrosion.
there are return tabs at the jaws, so You get better leverage and more grip, and they slide easily over yo....
StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 2pcs
StanceMagic Hubcentric Wheel Adapter Spacers with Lip. CHANGES BOLT PATTERN. Vehicle must be 5×100 bolt pattern AND wheels must be 5×114.3 or 5×4.5 bolt pattern. Compatible with 2012-2016 Scion FR-S FRS, 2016-2021 Toyota 86. Compatible with Subaru 2012-2021 BRZ, 2002-2007 Baja, 1997-2018 Forester, 1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications..
[VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Vehicle Hub is 56.1mm.
2) Wheel studs are M12x1.25 12×1.25mm threads.
3) You have 1.0″ (25mm) of space between your fender and your wheel/tire.
4) Your factory wheel studs are shorter than 1.0″ (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit).
5) Wheel center bore needs to be no smaller than 56.1mm..
[SPECIFICATIONS] Two (2) Wheel Adapter Spacers | Thickness: 1.0″ (25mm) Wide | Vehicle Bolt Pattern: 5/100 | Wheel Bolt Pattern: 5×114.3 (5×4.5″) | Hub Bore: 56.1mm | Stud/Nut Thread Size: 12×1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent....
StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 4pcs
StanceMagic Hubcentric Wheel Adapter Spacers with Lip. CHANGES BOLT PATTERN. Vehicle must be 5x100 bolt pattern AND wheels must be 5x114.3 or 5x4.5 bolt pattern. Compatible with 2012-2016 Scion FR-S FRS, 2016-2021 Toyota 86. Compatible with Subaru 2012-2021 BRZ, 2002-2007 Baja, 1997-2018 Forester, 1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications..
[VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Vehicle Hub is 56.1mm.
2) Wheel studs are M12x1.25 12x1.25mm threads.
3) You have 1.0" (25mm) of space between your fender and your wheel/tire.
4) Your factory wheel studs are shorter than 1.0" (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit).
5) Wheel center bore needs to be no smaller than 56.1mm..
[SPECIFICATIONS] Four (4) Wheel Adapter Spacers | Thickness: 1.0" (25mm) Wide | Vehicle Bolt Pattern: 5/100 | Wheel Bolt Pattern: 5x114.3 (5x4.5") | Hub Bore: 56.1mm | Stud/Nut Thread Size: 12x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corro....
40 – 65 is +/- 5%. The FAT wrench measures 2 L x 2 W x 6.25 H inches and the storage case measures 7.5 L x 5.5 W x 1.75 H inches.
EASE OF USE: Apply, repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field.
RELIABLE: Torque adjustment range from 10 inch/pounds to 65 inch/pounds.
DURABLE: Bits are made of S2 tool steel and hardened to 56-58 Rockwell “C”.
INCLUDES: 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 torx, T15 torx and Leupold specialty flat blade), ¼” socket and a convenient plastic storage case.
LONGTERM USE: Always return to the lowest inch/pound setting after use.
GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler. Please contact Wheeler customer service for assistance.
